Using The Head Cleaning Utility - Epson Stylus Photo 2000P Daily Use

Note:
Print head cleaning uses both color and black ink. To avoid wasting
ink, clean the print head only if print quality declines. For example,
clean the print head if the printout is blurry or the color is incorrect
or missing.
Use the Nozzle Check utility first to confirm that the print head
needs to be cleaned. This saves ink.
When the B black or A color ink out light is flashing or on, you
cannot clean the print head. Replace the appropriate ink cartridge
first.
Do not start the Head Cleaning or Nozzle Check utility while
printing is in progress; otherwise, your printout may be marred.

Using the Head Cleaning utility

Follow the steps below to use the Head Cleaning utility.
For Windows users
1. Make sure that the printer is on and both the B black and
A color ink out lights are off.
Note:
If the B black or A color ink out light is flashing, you cannot clean
the print head. Replace the appropriate ink cartridge first.
2. Click the Utility tab in the printer software, then click the Head
Cleaning button.
3. Follow the messages on your screen.
For Macintosh users
1. Make sure that the printer is on, and the B black and A color
ink out lights are off.
47