Table of Contents
Advertisement
2. Specifications
2. Specifications
2.1 Specification Tables
2.1.1 Electrical Specifications
Rated voltage
Voltage range
Power consumption
Dielectric strength
Insulation resistance
2.1.2 Environmental Specifications
Ambient temperature
(in panel and at sides of
display screen)
Storage ambient
temperature
Operating ambient
humidity
Storage ambient
humidity
Dust
Contamination level
Corrosive gasses
Air pressure resistance
(operation altitude)
Noise resistance
Electrostatic discharge
immunity
2.1.3 Appearance Specifications
Protective structure*
External dimensions
Weight
Cooling method
* The protective structure is for the front part when the Operator Panel is installed. Though
conformity has been confirmed under applicable testing conditions, use under all
environments is not guaranteed. Before you start to use the Operator Panel, confirm use
in the operating environment. Also, gasket that is used for long periods of time or once
has been installed on the panel is scratched or dirty, and may cause lose sufficient
protection performance. To ensure consistent protection performance, replace the gasket
periodically.
4
Item
DC 24 V
DC 21.6 to 26.4 V
7 W or less
AC 500 V 20 mA per minute (across charger and FG terminals)
500 VDC 20 MΩ or more
Item
5 to 40 deg C (with minimal variation)
−25 to 55 deg C
20 to 80% (no condensation)
20 to 80% (no condensation)
0.1 mg/m
2
Free of corrosive gasses
800 to 1114 hPa (Max. 2000 m)
1 kV (EN61000-4-4)
4 kV (EN61000-4-2 level 2)
Item
JEM1030 IP65 or equivalent NEMA#250 TYPE4X/12
W215 mm × H155 mm × D46 mm (excluding connector hood)
Approx. 800 g (Including Bypass Plug. Excluding the cable.）
Air-cooling without blower
Specifications
(across charger and FG terminals)
Specifications
3
or less (no conductive dust)
Specifications
OP1 Rev.1a
Advertisement
Table of Contents
