Panasonic CT-27DC50 Operating Instructions Manual page 5

INS TA LLA TION
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center. Consult your
dealer for available options.
Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
Fluorescent lighting may reduce remote control transmitting range.
Avoid magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors that match your component connectors.
Avoid long cables to minimize interference.
AC Power Supply Cord
CALR'ION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Cable / Antenna
Polarized plug
Non-Polarized plug
For proper reception, either a cable or antenna connection is required.
Incoming Cable from
Cable Connection
Cable Company
Connect the cable supplied by your local cable company.
75 OhmVHF/UHF
on back of TV
Note:A cable converter box may be required for proper reception. Check
with your/oce/cable company for compatibility requirements.
Antenna Connection
•For proper reception of VHF/UHF channels, an external antenna is
required. For best reception an outdoor antenna is recommended.
Incoming Cable from
Home Antenna
•Antenna Mode must be set to TV in the SETUP menu.
-- :_ Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to Antenna
Mode in the Setup Menu.
ml