reAssembling
the pedestal
® Fix securely with assembly screws _A_
(Total 4 screws).
® Tighten screws firmly.
bracket
not to fall over
Front
Base
(Image)
reSet-up
® Tighten assembly screws (_ (total 4 screws) loosely at first,
then tighten them firmly to fix securely.
Bottom
view
Rear side
Arrow
mark
- Hole for pedestal
Base
installation
f
Accessories
Assembly screws
(4 of each)
_ XSS5+15FNK
size (M5 x 15)
(B>
® XYN4+F25FJK
size (M4 x 25)
Bracket (1)
_ TBL5ZA32821
Base (1)
@ TBL5ZXO268 (for 42")
_ TBL5ZXO270 (for 47")
_ TBL5ZXO3841 (for 55")
(image)
Work on a flat surface
]
Removing
the pedestal
from
the TV
Be sure to remove the pedestal in the following way when using the wall
hanging bracket or repacking the TV.
Remove the assembly screws (_ from the TV.
_2_ Lift the TV from the pedestal.
_3_ Remove the assembly screws (_ from the bracket.
(
WARNING
Do not disassemble
or modify
the pedestal.
e Otherwise, the TV may fall over and become damaged, and personal injury may result.
(
Caution
)
Do not use any pedestal
other than that provided
with this TV.
_;_ Otherwise,
the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal
if it becomes
warped
or physically
damaged.
_ if you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During
set-up, make sure that all screws are securely
tightened.
_ if sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)
<¢_ O therwise,
the TV and/or pedestal may fall over and become damaged, and personal injury may result.
9