Using The Network Communication - Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Chapter 8 Network capture functions

Using the Network Communication

This Network Communication is to communicate by sharing the captured image of a computer with
multiple computers and a projector. Users can draw the text and figure on the captured image by using
a drawing tool.
The data that has the captured image of a Main PC and communication information is sent to the projec-
tor. The projector projects this data onto the screen and serves this data to other computers (Sub PC) at
the same time. The Sub PC receives served captured data and displays it on the screen. The Main PC and
Sub PC also can edit the captured image by using the drawing tool. This edited image is applied to all the
computers automatically.
PC1
* The Main PC is a computer which started using communication function, and serves own computer
screen captured image to the Sub PC. The Main PC has an authority to quit using whole communication.
To become the Main PC, execute the command "Start Communication" or "Capture transfer". For further
information, see item "How to use the Network Communication". (+p.98)
* The Sub PC is a computer which receives a captured image from the Main PC. On the communication
mode, the Sub PC can become the Main PC.
94
Capture
PC2
PC5
PJ1
PC6
Capture a screen
image of PC5 and
make marking with
a tool.