Keeping The Settings You Use Most Often; Printing On A Macintosh; Selecting And Loading Paper - Epson Stylus Photo 2000P Printer Basics Manual

Keeping the Settings You Use Most Often

The printer settings you make apply only to the application you're currently using. If
you usually print one type of document in different applications—for example,
Premium Semigloss Photo Paper with no margins—you can change the default
printer settings for all your programs. You do this using the Windows Printer utility:
1. Click , point to
Start
then select
Printers
2. Right-click your
printer icon.
2000P
3. Select
Properties
in Windows NT or
in Windows 2000).
Preferences
4. Select the
Main
and choose the default settings you
want to use for all your applications.
Click when you're finished.
OK
Remember, you can always change the settings in your application when you want to
print different types of documents.
Another way to select a group of settings quickly is to save them as a group; see
"Customizing Your Print Settings" on page 19.

Printing on a Macintosh

This section describes the basic steps for printing on a Macintosh. (To print with
Windows, see page 7.)

Selecting and Loading Paper

Before starting your print job, you need to select a suitable paper for your project.
This is an important step, because the paper you choose affects the quality and
appearance of your printout.
, and
Settings
.
EPSON Stylus Photo
(
Document Defaults
Printing
, , and
Paper Layout
Right-click
your printer
icon . . .
tab
then click
Properties
13