Remove all the packing materials and tape. Check carefully for all the tape inside and outside the printer. Save the box and packaging in case you need to ship the printer. Remove the two screws and the carriage retainer bracket.
Raise both ink levers. Remove each ink cartridge from its package and gently shake the cartridge. The first time you install ink cartridges, the printer uses Note: some ink to charge the printing system, so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full rated life.
Page 3
Open the Applications folder, then open the Utilities folder. Open the Printer Setup Utility and click the Add icon at the top of the printer list window. (If you see a message that you have no printers available, click Cancel.) Select the Stylus Pro 4880 and click Add.
Page 4
Windows Make sure your computer and printer are turned on but the printer is NOT CONNECTED to your computer. If you see a Found New Hardware Wizard screen, click Cancel and disconnect the Note: USB cable. Insert the Epson Stylus Pro 4880 printer CD.
Page 5
Make sure the printer is powered on and ready. Press the roll paper icon appears. Raise the roll paper support on top of the paper tray cover. Release the paper lever. Hold both sides of the paper and feed into the slot.
800-GO-EPSON (800-463-7766). Or you can also purchase online at www.proimaging.epson.com (U.S. sales) or www.epson.ca (Canadian sales). Epson and Epson Stylus are registered trademarks and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc.