Epson PowerLite 50c User Manual
Epson projector user'sguide 50c/70c
Hide thumbs
Also See for PowerLite 50c:
- User manual ,
- Product information (13 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Epson PowerLite 50c
Summary of Contents for Epson PowerLite 50c
- Page 1 EPSON ® PowerLite ® 50c/70c Multimedia Projector User’ s Guide...
-
Page 2: Important Safety Information
SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other products. -
Page 3: Table Of Contents
Registration and Warranty ......4 Setting Up Unpacking the Projector......5 the Projector Positioning the Projector . - Page 4 Cleaning the Lens ....... . 46 Cleaning the Projector Case ......46 Cleaning the Air Intake Vent .
- Page 5 Technical General ........59 Specifications Projection Lamp .
- Page 6 600 pixels (EPSON PowerLite 50c) or 1024 768 pixels (EPSON PowerLite 70c). Producing up to 700 ANSI lumens (EPSON PowerLite 70c) or 1000 ANSI lumens (EPSON PowerLite 50c), your projector creates bright images that can be easily seen in rooms light enough to take notes.
-
Page 7: Using Your Documentation
Reading This Manual Online Your EPSON PowerLite CD-ROM includes an electronic copy of this manual. You may find it convenient to copy it onto your laptop’s hard drive so it’s always with you—for example, when taking your presentation on the road. -
Page 8: Getting More Information
PowerBook computer. Owner’s Kit Includes your Quick Setup sheet, warranty brochures, CD-ROMs, and EPSON PrivateLine Support card. Store this User’s Guide in the folder and keep the folder with your projector at all times. Built-in help system Provides assistance for common problems. -
Page 9: Registration And Warranty
If you still need help after checking this User’s Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner’s Kit. Or take advantage of EPSON’s automated support services 24 hours a day. -
Page 10: Setting Up The Projector
You won’t need all these projector to another location. If you are moving the projector by components; your hand, use a carrying case (either an EPSON case or something similar, configuration will determine such as a laptop case). See page 50 for transportation instructions. -
Page 11: Additional Components
To receive an audio signal, you’ll need a stereo mini-jack cable, available from most electronics dealers. Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Customized carrying cases: Replacement lamp... -
Page 12: Positioning The Projector
You can purchase these accessories from your dealer, or by calling EPSON at (800) 873-7766, or by visiting the EPSON Store www.epsonstore.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral. Positioning the Projector The location in which you choose to set up your projector depends on the size of the room and your presentation style. - Page 13 40 ft. When projecting from a table, the ideal arrangement is to set the projector flat on its surface with the base of the lens at about the level of the bottom of the screen. This delivers the best-looking picture.
-
Page 14: Choosing Your Connections
“Connecting to a Computer” on page 10 and/or “Connecting to Video Sources” on page 18. If you need more volume, you can also connect the projector to external speakers or a public address system; see page 21. -
Page 15: Connecting To A Computer
If you’ll be using audio through the projector’s speakers, you need to connect an audio cable (not included with the projector). Connecting the Computer Cable Before you start, turn off your laptop and the projector. -
Page 16: Connecting The Mouse Cable
21 for instructions. Connecting the Audio Cable If you’ll be using audio through your projector’s speakers, you need to connect a stereo, mini-jack audio cable (not included). 1. Connect one end of the audio cable to the projector. -
Page 17: Connecting To A Pc Desktop Computer
21 for instructions. Connecting to a PC Desktop Computer To connect the projector to your PC desktop computer, you need to use the computer cable. If you’ll be using the remote control as a wireless mouse, you need to connect a mouse cable. - Page 18 21 for instructions. Connecting the Audio Cable If you’ll be using audio through your projector’s speakers, you need to connect a stereo, mini-jack audio cable (not included). 1. Connect one end of the audio cable to the projector.
-
Page 19: Connecting To A Powerbook
Connecting to a PowerBook You can connect your projector to most PowerBooks that support an external monitor. To connect the projector to your PowerBook, you need to use the computer cable. If you’ll be using the remote control as a wireless mouse, you need to connect a mouse cable. If you’ll be using audio through the projector’s speakers, you need to connect an... - Page 20 21 for instructions. Connecting the Audio Cable If you’ll be using audio through your projector’s speakers, you’ll need to connect a stereo, mini-jack audio cable (not included). 1. Connect one end of the audio cable to the projector.
-
Page 21: Connecting To A Macintosh Desktop Computer
Connecting to a Macintosh Desktop Computer To connect the projector to your desktop Macintosh, you need to use the computer cable. If you’ll be using the remote control as a wireless mouse, you need to connect a mouse cable. If you’ll be using audio through the projector’s speakers, you need to connect an audio cable. - Page 22 21 for instructions. Connecting the Audio Cable If you’ll be using audio through your projector’s speakers, you’ll need to connect a stereo, mini-jack audio cable (not included). 1. Connect one end of the audio cable to the projector.
-
Page 23: Connecting To Video Sources
NTSC, PAL, and SECAM formats, and automatically detects the one you’re using. Connecting the RCA A/V Video Cable Before you start, make sure the projector and your VCR or other video source are turned off. 1. Connect the yellow plug on one end of the A/V cable to the 2. -
Page 24: Connecting An S-Video Cable
You can connect a component video cable to project images from a DVD player or HDTV video source. You’ll need the RCA A/V cable (included with your projector) and a component video cable (optional; available from EPSON as described on page 6). S-Video (red) jacks. - Page 25 Before you start, make sure the projector and your component video source are turned off. 1. Connect the red and white plugs on the A/V cable to the 2. Connect the red and white plugs at the other end of the A/V cable 3.
-
Page 26: Connecting To External Speakers Or A Pa System
You’ll need an RCA-to-3.5mm stereo audio cable, which may be included with your sound system or may be purchased from an electronics store. Before you start, make sure the projector and speakers or PA system are turned off. 1. Connect the cable’s 3.5 mm stereo miniplug to the projector’s jack. - Page 27 Setting Up the Projector...
-
Page 28: Using The Projector
VCR, DVD player, or other video source. (If you’re projecting from a computer, go to step 2.) first connect one end of the power cord to the projector’s power inlet on its left side. Using the Projector... - Page 29 Using the Projector light on the projector turns orange, indicating that Power the projector is receiving power and is in sleep mode, but is not yet turned on. button on top of the projector. (You can Power also turn on the projector using the remote control, but you must turn on the remote control first;...
-
Page 30: What To Do If You See A Blank Screen
Power lens cap is off. If you’ve connected more than one input source, you may need to press the button on top of the projector or the Source , or Computer Video S-Video select the source you want to use. - Page 31 If You’re Using a PowerBook . . . You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select 2. Click the 3.
-
Page 32: Adjusting Your Image
On most systems, the between the LCD screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. -
Page 33: Adjusting The Image Size
Adjusting the Image Size You can adjust your image size using the projector or zoom into a portion of the image using the button on the remote control. Using the Wide/Tele Button To enlarge or reduce your image size in small increments, use the... -
Page 34: Adjusting The Image Height
Adjusting the Image Height If your image is too low, you can raise it by extending the projector’s feet. 1. Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet. -
Page 35: Adjusting The Image Shape
Video menu. Using the Projector If your image looks like projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. If your image looks like button to correct the shape of the image. -
Page 36: Using The Remote Control
15° vertical angle of the infrared receiver on the front of the projector. You can use the remote control to turn the projector on and off, zoom the image, display the projector menus, and other uses.If you connected a mouse cable to the projector, you can also use the remote control as a wireless mouse to run your presentation. -
Page 37: Operating The Projector With The Remote Control
1. Push up the light 2. Point the remote at the front of the projector or at the screen. 3. Press the button for the function you want to use. The light next The projector may not respond to remote control commands in these... -
Page 38: Controlling Audio And Video
Chapter 1. Switching Between Picture Sources You can connect the projector simultaneously to one computer source and one video source. Then you can use the buttons on the projector or remote control to switch between them. Press the... -
Page 39: Freezing The Picture
Adjust volume Adjusting Sound Volume Using the remote control, you can adjust the volume of your video or computer sounds. Using the Projector Press the button to freeze the current image on the screen. Freeze The sound will continue. Press the button again to re-start it. -
Page 40: Highlighting Your Presentation
Highlighting Your Presentation The projector’s highlighting tools let you emphasize areas on the screen using the numbered buttons on the remote control. This is useful for annotating your presentation slides or calling attention to their most important points. These tools are available:... -
Page 41: Shutting Down The Projector
When the projector has cooled, the orange the fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the Power power cord. -
Page 42: Fine-Tuning The Projector
Fine-Tuning the Projector You can use the on-screen menus to adjust the image, sound, and other features of your projector. This chapter covers the following information: Using the menus Adjusting the image Adjusting the sound Customizing the highlighting tools Customizing projector features... -
Page 43: Changing Menu Settings
About lamp settings, and lets you reset the lamp timer when you’ve replaced the projector’s lamp. restores the factory defaults to all the projector settings. Reset All buttons on the remote control to Menu... -
Page 44: Adjusting The Image
Moves the displayed image up, down, left, or right. Use the Enter button to move the screen position in the corresponding direction. Tracking* Removes vertical lines from the computer image by matching the projector’s internal clock to various computer graphic signals. Sync* Corrects fuzziness or screen flicker by synchronizing the projector with the computer’s... - Page 45 Choose YCbCr for DVD images. Choose YPbPr for HDTV images. Auto Setup* Set to ON to have the projector automatically optimize the computer image for projection. Mode** Selects the video image signal mode: Automatic or Manual. (For PAL 60 Hz mode, set to Manual.)
-
Page 46: Adjusting The Sound
Menu item Description Volume Adjusts the sound volume level output from the projector. Press the right or left side of the Enter button to adjust the setting. Tone Adjusts the sound quality by increasing or decreasing the treble. Press the right or left side of the Enter button to adjust the setting. -
Page 47: Customizing Projector Features
Reset Returns the Setting menu options to their factory defaults. * You can also use the Keystone button on the projector to adjust this setting. If the image is noticeably uneven, reduce the Sharpness setting on the Video menu. Advanced menu... -
Page 48: Viewing Projector Information
The options available in the menu depend on which source is connected to the projector: computer or video. Computer or component video source menu... -
Page 49: Restoring The Default Settings
Restoring the Default Settings setting lets you return all the projector’s menu settings Reset All to their initial factory defaults, except for the Lamp and Language settings. Select and press the button on the remote control to Reset All Enter display the confirmation screen. -
Page 50: Maintaining And Transporting The Projector
Maintaining and Transporting the Projector Your projector needs little maintenance. All you need to do on a warning regular basis is keep the lens clean. Any dirt or smears on the lens will Before you clean any part of show up on your projected image. -
Page 51: Cleaning The Lens
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Cleaning the Projector Case Before you clean the projector case, turn off the projector and unplug the power cord. Maintaining and Transporting the Projector To remove dust, use a canister of compressed air to spray the lens surface, or lightly wipe the lens surface with a soft, dry, lint-free cloth. -
Page 52: Cleaning The Air Intake Vent
2. Stand the projector on its back panel with the lens pointing upward. 3. To clean the vent, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, use a dry, lint-free cloth. -
Page 53: Replacing The Lamp
About menu; see page 38 for instructions. To order a replacement lamp (part number dealer or call EPSON at (800) 873-7766 or visit the EPSON Store at www.epsonstore.com (U. S. sales only). In Canada, please call (800) 873-7766 for dealer referral. - Page 54 Press it into place and tighten the retaining screws. 7. Insert the lamp cover as shown and press it back into place. 8. Follow the instructions in Chapter 3 to access the projector’s About menu and reset the lamp counter to zero.
-
Page 55: Transporting The Projector
When transporting the projector as freight or checked luggage, first put it in a carrying case (such as an EPSON case), then pack it in a firm box, using cushioning around the case. When you’re hand-carrying the projector, be sure to use a... -
Page 56: Solving Problems
If none of the suggestions here solve the problem, see “Where To Get Help” on page 58. Using the On-Screen Help If you have a problem while setting up or using your projector, you can get help by pressing the the remote control. - Page 57 Help for the sound Provides help for problems with lack of audio Language Selection Lets you choose to display the help information and projector menus in any of 8 different languages. Return Exits the help system.
-
Page 58: Checking The Projector's Lights
48 for instructions. intervals The projector is too hot. Turn it off and let it cool before using it. Also make sure nothing is blocking the projector’s air intake vent. If it continues to overheat, clean the air intake vent;... -
Page 59: Image Or Sound Problems
This is caused by the projector not facing the screen squarely or by extending the projector’s legs to position the image. Position the projector to face the screen squarely or press and hold the + or – side of the squared-up. - Page 60 Only part of the computer image is displayed. If the computer’s output resolution setting is higher than 800 600 for the (EPSON PowerLite 50c) or 1024 768 for the (EPSON PowerLite 70c), the image is resized. If the computer output is not compatible with this resizing, choose a different...
- Page 61 The image vibrates, flickers, or has vertical lines. The image quality is poor on a laptop computer. The video signal may be split between the computer and the projector. Try turning off the laptop LCD display. See your laptop manual or on-screen help for instructions.
-
Page 62: Problems With The Remote Control
Turn off any nearby equipment that emits infrared energy, such as a radiant room heater. Make sure you are within 32 feet of the projector and within a 30° horizontal or 15° vertical angle of the infrared receiver on the front of the projector. -
Page 63: Where To Get Help
Service Access World Wide Web From the Internet, you can reach EPSON’s product support page at Technical Support http://support.epson.com. After selecting your product, you can view frequently asked questions and answers, download product documentation, and receive technical advice through e-mail. -
Page 64: Technical Specifications
Internal speaker system 1W monaural Optical aspect ratio Keystone correction angle Supported video interface standards EPSON Control Code ESC/VP Level 5 Poly-silicon Thin Film Transistor (TFT) Diagonal: 0.7 inch (17.8 mm) F=1.5, f=26.3 mm Manual Digital 1.0 to 1.2, lens at maximum size,... -
Page 65: Projection Lamp
Projection Lamp Type Power consumption Lamp life Part number Remote Control Range Batteries Mouse Compatibility Supports PS/2, USB, and ADB Dimensions Height Width Depth Weight Electrical Rated frequency Power supply Power consumption Environmental Temperature (non-condensing) Humidity (non-condensing) Technical Specifications UHE (Ultra High Efficiency) 150 W About 1500 hours ELPLP13... -
Page 66: Safety
Safety United States FCC Part 15J Class B UL1950 Rev. 3 Canada DOC SOR/88-475 CSA C22.2 No. 950 Rev. 3 CE Marking Directive 89/336/EEC EN 55022 Class B EN 50082-1 Directive 73/23/EEC EN 60950 Computer Connector Pin Assignments The Computer port is a female video RGB, 15-pin micro-D-style connector. -
Page 67: Compatible Video Formats
Compatible Video Formats The projector supports the video formats listed below. To project computer images, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector. Mode Resolution PC (RGB) compatible modes VGACGA... - Page 68 ** Select 4:3 or 16: 9 mode as the Aspect Ratio setting in the Video menu; see page 40 for instructions. Frequency Pixel EPSON (KHz) (Hz) (MHz) PowerLite 50c 15.734 59.94 13.5 800 x 600 * 31.469 59.94 800 x 600 * 74.25...
- Page 69 Technical Specifications...
-
Page 70: Important Safety Instructions
Do not use the projector near water or sources of heat. Use attachments only as recommended. Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company. - Page 71 Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug. Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
-
Page 72: Remote Control Information
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front of the projector. The projector may not respond to remote control commands under the following conditions: There is an object between the remote control IR emitter and the IR receiver on the projector. -
Page 73: Declaration Of Conformity
Trade Name: Type of Product: LCD Projector Model: Notices EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 6-43 Long Beach, CA 90806-2469 (562) 290-5254 EPSON PowerLite 50c and PowerLite 70c... -
Page 74: Fcc Compliance Statement
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 75 Notices...
-
Page 76: Index
Default settings, restoring, 44 Desktop PC, connecting, 12 to 13 Digital camera, connecting, 18 to 20 Dimensions, 60 Distance from projector to screen, 7 to 8 DVD player, connecting, 18 to 20 Effect menu, 41 Electrical specifications, 60 E-mail support, 58... - Page 77 Freeze button, 34 Gamma setting, 40 HDTV, connecting, 18 to 20 Help button, 32, 51 to 52 Help system, using, 51 to 52 Help, EPSON see EPSON Highlighting presentation, 35, 41 Horizontal bar tool, 35, 41 Humidity requirements, 60 Index...
- Page 78 Mode setting, 40 Mouse cable, 11, 13, 15, 17 No Signal message, 25, 42, 54 Numbered buttons on remote control, 35 Options for the projector, 6 to 7 PA system, connecting, 21 Picture, see Image Pin assignments, connector, 61 Positioning...
- Page 79 Resolution pixels, 1 PowerBook, selecting, 26 problems, 55 specifications, 59 Safety instructions, 45, 65 to 66 Screen, distance from projector, 7 to 8 Select button, 52 Setting menu, 42 Sharpness setting, 40 Shutting off projector, 36 SizeWise technology, 1 Sleep mode, 24, 36, 42...
- Page 80 VCR, connecting, 18 to 20 Video button, 25, 33 display settings, viewing, 43 menu, 39 to 40 problems, 54 to 57 source, connecting, 18 to 20 source, selecting, 25, 33 Volume button, 34 setting, 41 Warning lights, 53 Warranty, 4 Wide/Tele button, 28 Wireless mouse, using remote control as, 32 to 33...