Craftsman 172.67098 Operator's Manual page 16

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCMNG
To preserve natural resources, please recycle or dispose of batteries properly.
This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit
disposal of nickel-cadmium batteries in ordinary trash.
Consult your local waste authority for information regarding available recycling and / or
disposal options.
/K WARNING:
Upon removal, cover the battery pack's terminals with heavy-duty
adhesive tape. Do not attempt to destroy or disassemble battery pack or remove
any of its components. Nickel=cadmium batteries must be recycled or disposed of
properly. Also, never touch both terminals with metal objects and / or body parts as
short circuit may result. Keep away from children. Failure to comply with these
warnings could result in fire and /or serious injury.
/_ WARNING: The use of attachments or accessories that are not
recommended for this tool might be dangerous and could result in serious injury.
Sears and other Craftsman outlets have a selection of 51/2-inch Craftsman steel
carbide-tipped blades designed for specific cutting applications.
Sears and other Craftsman outlets also offer sawhorses, combination and framing squares,
straight edges, edge guides, and a large assortment of clamps to help you with all your
sawing needs.
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.
If the blade does not follow a straight line:
,, Teeth are dull. This is caused by hitting a hard object such as a nail, dulling teeth on one
side. The blade tends to cut to the side with the sharpest teeth.
,, Base is out of line or bent.
,, Blade is bent.
,, Edge guide or straight edge is not being used.
if the blade binds or smokes from friction:
, Blade is dull.
, Blade is on backwards.
, Blade is bent.
, Workpiece is not properly supported.
, Incorrect blade is being used.
51/2-in. Cordless Circular Saw
Model No. 172.67098 In Kit 9-11518
Item No. Parts No. Part Description Qty.
1 CSC18GU-1 PRESS BOLT 1
2 CSC18GU-2 OUTER FLANGE 1
3 CSC18GU-3 SAW BLADE 1
4 CSC18GU-4 INNER FLANGE 1
5 CSC18GU-5 RETAINING RING 26 1
6 CSCl 8GU-6 LOWER GUARD 1
7 CSC18GU-7 TORSION SPRING 1
8 CSC18GU-8 SCREW M5X16 2
101 CSC18GU-101 GEAR UNIT 1
9 CSCl 8GU-9 GEAR COVER 1
10 CSC18GU-10 BALL BEARING 6000 1
11 CSC18GU-11 SPINDLE 1
12 CSC18GU-12 GEAR 1
13 CSCl 8GU-13 SELF TAPPING SCREW M6X20 1
14 CSC18GU-14 RUBBER RING 1
15 CSC18GU-15 SCREW M4X12 2
102 CSC18GU-102 FIXED GUARD NUIT 1
16 CSC18GU-16 NEEDLE BEARING BK061009 1
17 CSC18GU-17 UPPER GUARD 1
18 CSC18GU-18 DUST EXTRACTOR COVER 1
19 CSC18GU-19 LOCKING KNOB 1
20 CSC18GU-20 COMPRESSION SPRING 1
21 CSC18GU-21 FELT SEAL 1
103 CSC18GU-103 MOTOR UNIT 1
3O 31
I
I
I