Advertisement
PLUMB
cont. (Fig. 5)
The LCD display
shows the surface
with the level on it as a line, and true plumb
as
another
line either to the left or right of the line for plumb,
and the degree
to with the
surface
is off, with an arrow showing
whether
to move the surface
to the left
or right. If the beeper
button
is on, the level will beep when true plumb
or 90 ° is reached.
Fig. 6
PITCH (Fig. 6)
The digital
laser level can be used to measure
the pitch of a roof,, It measures
the pitch
in inches of rise per foot of run. Push the conversion
button to change
angle to pitch°
The pitch will be read as inches per foot in 1/8-in° increments,
with a + or a - sign to
indicate if the pitch is above
or below
the desired
measurement.
Fig. 7
ANGLE (Fig. 7 )
The digital
laser level measures
any angle in degrees
with up to 0.10 accuracy.
This can be used to find the necessary
angle for many surfaces,
and when
the conversion
button is pushed
to display
angle, will tell you the angle and which way
it is off of true level,
tf the beeper
button is turned
on, the level will beep at 0 ° angle.
11
Advertisement
