1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. 822p/83c
  6. User manual

Epson 822p/83c User Manual

Epson user's guide multimedia projector 822p/83c
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PowerLite
822p/83c
®
Multimedia Projector
User' s Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson 822p/83c

Summary of Contents for Epson 822p/83c

  • Page 1 PowerLite 822p/83c ® Multimedia Projector User’ s Guide...

  • Page 2: Important Safety Information

    Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...

  • Page 3: Table Of Contents

    Unpacking the Projector......10 Projector Parts ........11 Additional Components .
  • Page 4 Adjusting the Volume ......41 Shutting Down the Projector ......42 Using the Remote Control Controlling the Picture and Sound.
  • Page 5 Cleaning the Lens ....... . 70 Cleaning the Projector Case ......70 Cleaning and Replacing the Air Filter .
  • Page 6 Opening and Closing EMP Monitor ....94 Registering a Projector ......95 Monitoring Your Projector .

  • Page 7: Welcome

    Welcome ® he PowerLite 822p/83c is a portable projector that weighs less than 7 pounds. The projector offers 2600 ANSI lumens (822p) or 2200 ANSI lumens (83c) of brightness. From classrooms to boardrooms, your full-color presentations and videos will be bright and vibrant even in ordinary indoor lighting.

  • Page 8: Getting The Most From Your Projector

    Welcome Connecting to a laptop or other computer If you want to connect the projector to a laptop or desktop computer, see page 18. For additional presentation control, you can connect an external monitor to view the presentation on your computer simultaneously.

  • Page 9: Using Your Documentation

    PowerLite 83c. If you still need help after checking this User’s Guide and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on your PrivateLine Support card. See page 87 for more information.

  • Page 10: Registration And Warranty

    In addition, Epson offers Extra Care charge. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada, usually within one business day.

  • Page 11: Projector Parts

    Projector Parts Front Control panel Lamp cover Air exhaust vent Front adjustable foot Back S-Video port LAN port Video port Remote control sensor Speaker Audio Out Monitor Out port port (for Computer1 port output only) Bottom Holes for ceiling mount...

  • Page 12: Additional Components

    To receive a component video signal from a VCR or other video device, you need a D-sub, 15-pin, component-to-VGA video cable, which is available from Epson. See page 13. Some older PowerBooks and Macintosh desktop models may need a Macintosh video adapter; see your computer dealer. Older iMac systems may need a special adapter to provide a VGA output port;...

  • Page 13: Optional Accessories

    Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Replacement lamp Air filter set (includes 2 filters) Component-to-VGA video cable S-Video cable Distribution amplifier 50-inch portable screen (4:3 aspect ratio) 60-inch portable pop-up screen (4:3 aspect ratio) 80-inch portable pop-up screen (4:3 aspect ratio) 83.6-inch hanging pull-down screen...
  • Page 14 Welcome...

  • Page 15: Setting Up The Projector

    Setting Up the Projector his chapter tells you how to set up the projector and connect it to a computer or video source. You can connect up to four devices simultaneously: four video sources, or two computer and two video sources.

  • Page 16: Positioning The Projector

    Try to You can download the leave as much space as possible between the projector and the screen to Projection Distance get a good-size image. Calculator program from the Drivers and Downloads Place the projector somewhere between 3 and 30 feet from the screen.

  • Page 17: Other Installations

    Try to place the projector directly in front of the center of the screen, facing it toward the screen squarely. If the projector isn’t positioned this way, the image will be “keystone” shaped, instead of square or rectangular. If you place the projector below the level of the screen, you’ll have to tilt it up by extending the front adjustable foot, as described on page 39.

  • Page 18: Connecting To A Computer

    Connecting to a Computer You can connect the projector to any computer that has a standard note VGA or BNC monitor port, including PC notebook and laptop If you have an iBook with computers, Macintosh PowerBooks and iBooks, and hand-held an RCA video-out port, devices.
  • Page 19 If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the button on the projector or remote control.

  • Page 20: Connecting With A Vga-5Bnc Cable

    If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the button on the projector or remote control.

  • Page 21: Connecting An External Monitor

    This lets you view images on your computer monitor while the projector is in standby mode (plugged in but not turned on) and check your presentation or switch between picture sources even if you’ve pressed the...

  • Page 22: Playing Sound Through The Projector

    Playing Sound Through the Projector You can connect a commercially available 3.5 mm stereo mini-jack audio cable to take advantage of the projector’s built-in speaker. You can obtain the audio cable from a computer or electronics dealer. 1. Connect one end of the 3.5 mm stereo mini-jack audio cable to 2.

  • Page 23: Connecting External Speakers

    3. Connect the other end of the cable to your speakers. The projector’s internal speaker system is disabled while sound is output to external speakers, and you can’t use the projector or remote control to adjust the volume. Audio...

  • Page 24: Connecting To Video Sources

    For composite video, use a commercially available RCA A/V cable. See page 25. For S-Video, use the S-Video cable supplied with your video device or order one from Epson. See page 26. For RGB video, use the VGA computer cable included with the projector. See page 27.

  • Page 25: Connecting A Composite Video Source

    If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 34 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the button on the projector or remote control.

  • Page 26: Connecting An S-Video Source

    You’ll need an S-Video cable, which is usually provided with your video source, or you can purchase one from Epson (part number ELPSV01). See page 13 for ordering information. Before starting, make sure the projector and your DVD player or other video source are turned off.

  • Page 27: Connecting An Rgb Video Source

    Connecting an RGB Video Source Follow these instructions to connect the projector to a video player or satellite receiver that has an RGB video output port using the VGA computer cable that came with the projector. Before starting, make sure the projector and your DVD player or other video source are turned off.

  • Page 28: Connecting A Component Video Source

    If your video source has component video connectors, you can use them to project a higher quality video image. You’ll need a component-to-VGA video cable, which can be purchased from Epson (part number ELPKC19). See page 13 for ordering information.

  • Page 29: Playing Sound Through The Projector

    Playing Sound Through the Projector The projector has a built-in speaker with a maximum output of 7 W. You can play sound from your video equipment through the projector’s speaker if your video device has an audio output port. For RCA-Type Audio Output Ports Most video devices have an RCA-type audio output port.
  • Page 30 (3.5-mm stereo miniplug to two male RCA plugs) to connect to the projector. 1. Connect one end of the audio adapter cable to the 2. Connect the other end of the audio adapter cable to your video If you don’t need to make any other connections, you can plug in...
  • Page 31 3. Connect the other end of the cable to your speakers. The projector’s internal speaker system is disabled while sound is output to external speakers, and you can’t use the projector or remote control to adjust the volume. Setting Up the Projector...
  • Page 32 Setting Up the Projector...

  • Page 33: Projecting

    Projecting nce you’ve set up the projector, you’re ready to turn it on, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote.

  • Page 34: Turning On Your Equipment

    If you turn on your connected computer or video equipment before starting the projector, the projector automatically detects and displays the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually.
  • Page 35 To focus and adjust the image, see page 38. If a projected image fails to appear, see “What To Do If You See a Blank Screen” on page 36. When you’re done, shut down the projector as described on page 42. Power...

  • Page 36: Selecting The Image Source

    A/V Mute Make sure you’ve selected the correct image source; see the previous section. Allow a few seconds for the projector to sync up after pressing the button. Check the Signal menu to make sure the correct input source is selected.
  • Page 37 If you’re using a Macintosh laptop with OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Display Displays.

  • Page 38: Adjusting The Image

    Rotate the focus ring to sharpen the image, and the zoom ring to reduce or enlarge the image. You can also change the image size by moving the projector closer to or farther away from the screen. You can use the the remote control to zoom in on a portion of the image.

  • Page 39: Adjusting The Height Of Your Image

    The projector automatically corrects images that are distorted when the projector is tilted up or down (up to a 30° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn’t rectangular, follow the instructions in the next section.

  • Page 40: Adjusting The Image Shape

    Adjusting the Image Shape If the projector is tilted up or down, the images that are displayed will be distorted. To correct the distortion or “keystone” shape, do one or more of the following: ■ ■ ■ You can also make keystone adjustments using the projector’s Settings menu.

  • Page 41: Correcting Computer Images

    Vol- Vol+ increase or decrease the volume for the projector’s built-in speaker. You can also use the buttons on the projector to control the volume. Press the button to increase the volume, or the decrease it. A volume gauge appears on the screen while the volume is being adjusted.

  • Page 42: Shutting Down The Projector

    59. Turn off this product when not in use to prolong the life of the projector. 4. Press up on the blue foot release lever and lower the projector to 5. Close the caution To avoid damaging the 6. Unplug the power cord.

  • Page 43: Using The Remote Control

    Chapter 4.) When using the remote control, stand within 20 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen).

  • Page 44: Controlling The Picture And Sound

    You can use the remote control to select your source, adjust the colors, temporarily turn off the picture and sound, freeze the action, or zoom in on the picture. Make sure you have set up your projector and connected any equipment as described in Chapter 1.

  • Page 45: Adjusting The Color Mode

    Blackboard Choose this fixed color mode when you need to project against a green blackboard. You can also use the projector menu system to change the color mode in the Image menu (see page 53). Color Mode Color...

  • Page 46: Turning Off The Picture And Sound

    Using the Remote Control button on the remote control or use the A/V Mute slide on the projector to turn off the image and sound and To turn off the picture and sound, press the close the slide on the projector. The screen goes dark.

  • Page 47: Zooming Your Image

    Normal Press the button again to cycle through the available options. Aspect You can also change the aspect ratio using the projector’s Signal menu. See page 54 for details. button to enlarge the selected button to return to the original...

  • Page 48: Replacing The Batteries

    Replacing the Batteries The remote control uses two AA alkaline batteries. Follow these steps note when you need to replace them: The remote control 1. Press in the tab to remove the battery cover. automatically shuts off when it detects a button being pressed more than 30 seconds.

  • Page 49: Fine-Tuning The Projector

    Fine-tuning the Projector ou can use the button on the projector or remote control to Menu access on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system Adjusting image colors and clarity ■...

  • Page 50: Using The Projector's Menu System

    See page 56. menu lets you customize the way you set up the Extended projector.

  • Page 51: Changing Menu Settings

    Changing Menu Settings Use the buttons on the remote control or on the projector to access the menus and change settings. Follow these steps: 1. Press the button on the remote control or projector to Menu display the menu screen:...

  • Page 52: Adjusting Colors And Clarity

    Component, composite, and S-Video Fine-tuning the Projector Press the left or right arrow buttons on the projector or the remote control to adjust a slider bar. To select from two or more settings, use the up or down arrow buttons on the projector or the remote control to highlight the...
  • Page 53 Adjusts the difference between light and dark areas. (component, composite, and S-Video) ■ Color Saturation Adjusts the depth or intensity of the image colors. to set the Enter note You can also select brightness mode in the Settings menu. See page 57. Fine-tuning the Projector High...

  • Page 54: Adjusting The Input Signal

    4. When the image is set correctly, press Adjusting the Input Signal Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to manually select it. You can also change the position of the projected image, correct tracking and sync, and change the aspect ratio to widescreen format.
  • Page 55 See page 84 for more information. (computer images) ■ Sync Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer. See page 84 for more information. (computer images) ■ Position Use the arrow buttons to move the image on the screen left, right, up, or down.

  • Page 56: Customizing Projector Features

    4. When you’re finished, press Customizing Projector Features The Settings menu lets you customize the way you use the projector, from adjusting lamp brightness and speaker volume to applying security controls. 1. Press the 2. Select the Fine-tuning the Projector (composite and S-Video) ■...
  • Page 57 Adjusts a distorted image from a trapezoid shape to rectangular. ■ Auto Keystone Automatically adjusts a distorted image from a trapezoid shape to rectangular when the projector’s foot is extended or retracted. (Not available when you’re projecting from the ceiling or using rear projection.) Select ■ Operation Lock...

  • Page 58: Selecting Projector Setup Options

    A/V Mute: when the Logo A/V Mute ■ User’s Logo Turn on to display the image or logo you have captured whenever the projector is turned on. See page 63 for more information. Black , or Black Blue button is pressed.
  • Page 59 ■ Standby Mode Select to allow the projector to be monitored Network On over a network when the projector is in standby mode (the light is orange). Power ■ Language Select the language to be used for the projector menus.

  • Page 60: Selecting Network Settings

    Selecting Network Settings For information connecting the projector to a network and monitoring the projector over a network, see “Monitoring the Projector Over a Network” on page 89. Viewing Lamp Usage and Other note Information You can make changes to many of the signal settings on the Signal menu.
  • Page 61 (computer, RGB video, and component video) Sync Info Provides information that may be needed by the service technician. ■ Status Displays informations about projector problems. This information may be needed if service is required. 3. When you’re finished, press High brightness Menu...

  • Page 62: Using The Projector's Security Features

    30 times in a row, the projector is locked and you’ll need to note contact Epson to unlock it. See “Where To Get Help” on page 87. If you should happen to If someone else will be using the projector for awhile but you want to...

  • Page 63: Creating Your Own Screen Logo

    Follow these steps to capture the image and transfer it to the projector: 1. Display the image you want to use on the projector. You can use an image from a computer or video source, such as a DVD player.

  • Page 64: Setting A Password

    Save image as user’s logo? and press . Saving the logo takes a few moments. Do Enter not use the projector or other sources (computer, video, etc.) while the logo is being saved. When you see the message , press Completed...

  • Page 65: Turning On The Password And User's Logo

    3. To enable your screen logo, select . Select then press Enter When this feature is on the logo appears whenever the projector is turned on (if the Startup Screen menu; see page 58) and as the A/V Mute screen (if you selected...

  • Page 66: Starting The Projector With A Password

    If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson for service. If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance.

  • Page 67: Disabling The Projector's Buttons

    You can install two different types of security locks on the projector: ■ You can use the security slot on the base of the projector to install a Kensington Microsaver Security System. See page 13. You can use a wire lock to secure the projector to a room fixture ■...

  • Page 68: Restoring The Default Settings

    Restoring the Default Settings The Reset menu lets you return most projector menu settings to their note default values. It also lets you reset the lamp hours to their initial The Computer Input (1 and default value; see page 75 for instructions on resetting the lamp timer.

  • Page 69: Maintenance And Transportation

    You may need to clean the air filter and air vents. A clogged air filter the projector, turn it off and unplug the power cord. or air vent can block ventilation needed to cool the projector and Never open any cover on the cause overheating.

  • Page 70: Cleaning The Lens

    Cleaning and Replacing the Air Filter Your projector includes an air filter to ensure the best performance. If dust collects on the air filter or vent on the bottom of the projector, clean them as described below. Dust clogs prevent proper ventilation and can cause overheating and damage the projector.
  • Page 71 1. Turn off the projector, allow it to cool down, and unplug the power cord. 2. To clean the filter and vent, Epson recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean them using a very soft brush (such as an artist’s paintbrush).

  • Page 72: Replacing The Lamp

    Turn off this product when ■ not in use to prolong the life of the projector. Contact your dealer or call Epson at (800) 463-7766 for a replacement lamp. Request part number V13H010L42. Follow these steps to replace the lamp: warning 1.
  • Page 73 3. Use the screwdriver included with the replacement lamp or a #2 Phillips-head screwdriver to loosen the screw holding the lamp cover (the lamp cover is located on top of the projector). 4. Slide the cover out, then lift it off.
  • Page 74 Push the lamp down firmly where the label appears. PUSH covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screw.

  • Page 75: Resetting The Lamp Timer

    You must reset the lamp timer after replacing the lamp to clear the warning message. Follow these steps: Replace the Lamp 1. Connect the power cable and turn on the projector. 2. Press the button on the remote control or projector and...

  • Page 76: Transporting The Projector

    Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, please follow these packing guidelines to prevent damage to the projector: ■ note Epson shall not be liable for ■ any damage incurred during transportation.

  • Page 77: Solving Problems

    Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: Using the projector’s on-screen help system ■ ■ What to do when the projector’s status lights flash ■...

  • Page 78: Using On-Screen Help

    The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended in the following table.
  • Page 79 If this does not solve the problem, turn the projector off and unplug it. Contact Epson for help; see page 87. There is an internal error in the projector. Turn the projector off and unplug it. Contact Epson for help; see page 87. ° °...

  • Page 80: Solving Problems With The Image Or Sound

    Enter 7 seconds to release the lock. The projector may be in standby or sleep mode. If the projector has not received any signal for 30 minutes, it turns off the lamp to conserve the lamp life and save energy. If the P orange, press the P button to turn on the projector.
  • Page 81 Source Search projector or the remote control to select the correct source. Allow a few seconds for the projector to sync up after pressing the button. If you’ve connected a laptop computer, make sure it’s set to ■...
  • Page 82 See your software documentation for specific information. Make sure the projector isn’t placed off to one side of the screen, at an angle, or the image won’t be rectangular. Place it directly in front of the center of the screen, facing the screen squarely.
  • Page 83 Try cleaning the lens as described on page 70. ■ ■ Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment. Make sure the projection distance is within the range described on ■...
  • Page 84 Press the button on the remote control to Enter/Auto automatically reset the projector’s tracking and sync settings. If necessary, you can manually adjust the settings on the Signal menu as described on page 55. To help you adjust these settings, fill the screen with a detailed image, such as a desktop background pattern or black text on a white background.

  • Page 85: Solving Password Problems

    0000 The remote control is not available. You must have the remote control to enter the password. You can purchase a replacement remote control from Epson. See page 88. button on the Vol+ A/V Mute Source Search...

  • Page 86: Solving Problems With The Remote Control

    ■ You have lost the remote control. You need the remote control to access many projector features. If you have lost it, you can order another from Epson. See page 88 for details. Solving Problems Make sure you are within 20 feet of the projector, and within range of the projector’s front or back sensor (approximately 30°...

  • Page 87: Solving Network Problems

    Where To Get Help Epson provides these technical support services: Internet Support Visit Epson’s support website for solutions to common problems with the PowerLite 822p or PowerLite 83c. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

  • Page 88: Speak To A Support Representative

    Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.

  • Page 89: Monitoring The Projector Over A Network

    Monitoring the Projector Over a Network he software included with your projector lets you monitor and control your projector over a network. Use EMP Monitor (available for Windows only) to see your ■ projector’s status, switch image sources, and control basic settings.

  • Page 90: Installing The Network Software

    Installing the Network Software The network software CD-ROM includes the software you need to monitor the projector from a remote location. The Epson Projector Software CD-ROM includes EMP Monitor for monitoring the projector from a remote location. Windows System Requirements...

  • Page 91: Connecting To The Network

    Connecting to the Network Follow these steps to connect the projector to your network and configure it with an IP address. 1. Connect the projector to your network using a commercially available 100BaseTX or 10BaseT network cable. Connect the cable to the port on the projector.

  • Page 92: Selecting Network Settings

    Selecting Network Settings Follow the instructions in this section to set up the projector’s network settings in the menu system. 1. Press the 2. Select the 3. Press Monitoring the Projector Over a Network button. Menu menu. Network . Then use the up and down arrow buttons and the...

  • Page 93: Using Projector E-Mail Alerts

    ■ Projector Name Enter a name for identifying the projector over the network. Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. 1. Press the button, select the...

  • Page 94: Using Emp Monitor

    If you want to monitor the EMP Monitor lets you use a remote computer to manage your projector while it is in projectors. It lets you easily turn the projector on or off, switch image standby mode, select sources, and check its status.

  • Page 95: Registering A Projector

    3. Click to locate projectors currently operating on the Search network. 4. Select the projector you want to add by clicking its name, then click the button. Edit 5. Enter a Display name, select a Parent group, if necessary, enter a Monitor Password, if necessary, and a Description for the projector.
  • Page 96 Monitoring the Projector Over a Network No warnings or problems. Warning or problem. Monitor Password error. No monitor password was entered when you registered the projector, or an incorrect password was entered. Monitoring disabled. Right-click the icon and select Monitoring Enabled to monitor the projector.
  • Page 97 Low air flow. The air filter needs to be cleaned or replaced. Air flow sensor error. Contact Epson as described on page 87. Lamp cover door open. Close the lamp cover door. Lamp out. The lamp has reached the end of its life.

  • Page 98: Using E-Mail Alerts

    7. Click the 8. When you’re done, click the If a projector experiences a problem, EMP Monitor sends an e-mail message to each of the addresses you entered in the Set mail notification function window. The subject line and body of the note message includes the projector’s name and the warning or error...

  • Page 99: Using A Browser To Monitor The Projector

    Using a Browser to Monitor the Projector If your projector is connected to a network, you can use a standard web browser to monitor and control it. When using a browser to access the projector, you cannot connect through a proxy server.
  • Page 100 Monitoring the Projector Over a Network...

  • Page 101: Technical Specifications

    Technical Specifications General Type of display Poly-silicon TFT active matrix PowerLite 822p: with MLA PowerLite 83c: without MLA Lens F=1.6 to 1.74, 18.4 to 22.12 mm Resolution 1024 × 768 pixels (XGA) Color reproduction Full color, 16.77 million colors Brightness (ANSI) PowerLite 822p 2600 lumens (High brightness mode) 2080 lumens (Low brightness mode)

  • Page 102: Projection Lamp

    Noise level note Keystone correction Lamp life results will vary angle depending upon mode selected, environmental conditions and usage. Lamp Projection Lamp brightness decreases over Power consumption time. Lamp life Remote Control Range Batteries (2) Dimensions Height (including feet) 4.3 inches (108 mm) Width Depth Weight...

  • Page 103: Environmental

    Up to 7,500 feet (2,286 m) with High Altitude Mode enabled; see page 58 Safety and Approvals United States FCC Part15B Class B (DoC) UL60950-1 Canada ICES-003 Class B CSA C22.2 No. 60950-1 Pixelworks projector. ™ ™ ICs are used in this Technical Specifications...

  • Page 104: Compatible Video Formats

    Compatible Video Formats You can use any of the following video sources: VCR, DVD player, camcorder, digital camera, or gaming console. The projector supports composite video, S-Video, component video, and RGB video, and it automatically senses the video format (HDTV, SDTV, NTSC, PAL, or SECAM).

  • Page 105: Compatible Computer Display Formats

    ™ SPARCstation. Although images are displayed at the projector’s native resolution of 1024 × 768 pixels, Epson’s patented SizeWise chip supports computer display formats ranging from VGA through UXGA. To project images output from a computer, the computer’s external monitor signal must be set at a refresh rate (vertical frequency) that’s compatible with the projector;...
  • Page 106 The projector supports these monitor display formats: Mode VGA EGA VGA—60 VESA—72 VESA—75 VESA—85 VGA—120 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 SVGA—120 XGA—60 XGA—70 XGA—75 XGA—85 XGA—120 SXGA1—70 SXGA1—75 SXGA1—85 SXGA1—100 SXGA2—60 SXGA2—75 SXGA2—85 SXGA3—60 SXGA3—75 SXGA3—85 SXGA+—60 SXGA+—75 SXGA+—85 UXGA—60...
  • Page 107 Mode Refresh Rate (Hz) iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19—60 MAC19 MAC21 SDTV 480i SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) 50/60 HDTV (1080i) 50/60 Resolution 640 × 480 800 × 600 1024 × 768 640 × 480 832 ×...
  • Page 108 Technical Specifications...

  • Page 109: Notices

    ■ Do not use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company. ■ Place the projector near a wall outlet where the plug can be easily unplugged.
  • Page 110 If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service.

  • Page 111: Fcc Compliance Statement

    FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 112 Notices...

  • Page 113: Index

    Component-to-VGA video cable, 12 to 13, 24, Composite video cable, 24 to 25 Computer cable, 10, 18 to 20 connecting to projector, 18 to 22 source, selecting, 19, 20, 36, 44, 55 support, 7 supported display formats, 105 to 107...
  • Page 114 High brightness, 40, 72, 80, 101 iBook, connecting to, 18 to 19 iMac, connecting to, 12, 18 to 20 Image capturing and saving in projector, 63 to 64 correcting shape of, 40, 57, 82 fitting on screen, 41, 55, 56, 82 focusing, 38...
  • Page 115 EMP Monitor, 94 to 98 with browser, 99 Moving projector, 76 Network connecting to, 91 managing projector remotely, 89 to 99 menu, 50, 60, 92 to 94 problems, 87 settings, 60, 92 to 94, 95 system requirements, 90 Network Protect password, 65...
  • Page 116 Resolution, 7, 61, 101, 105 to 107 Safety approvals, 103 instructions, 109 to 110 Screen logo, see User’s Logo Screen, distance from projector, 16, 101 Screens, portable, 13 Setting a password, 64 to 65 Settings menu, 50, 56 to 57 Sharpness setting, 54...
  • Page 117 86 Turning off audio, 46 picture, 46 projector, 42 Turning on password, 65 projector, 34 to 35 User’s Logo, 58, 65 Typing the password, 66 Unpacking projector, 10 User’s Logo creating, 63 to 64 displaying, 64 to 65...

This manual is also suitable for:

Powerlite 822pPowerlite 83cRb-v11h255020-n - powerlite 83c lcd projectorV11h255020 - powerlite 83c xga lcd projector

Table of Contents