Epson EB 824 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB 824
  6. User manual
Epson EB 824 User Manual

Epson EB 824 User Manual

Epson projector user manual
Hide thumbs Also See for EB 824:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EB 824

Summary of Contents for Epson EB 824

  • Page 1 User’s Guide...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property.

  • Page 3: Table Of Contents

    Projector Features........
  • Page 4 Cleaning the Projector's Surface........67...
  • Page 5 Specifications..........97 Projector General Specifications........97 Software Requirement.

  • Page 6: Introduction

    Introduction This chapter explains the projector's features and the part names.

  • Page 7: Projector Features

    Quick Enhanced security functions • Password Protect to restrict and manage users By setting a Password you can restrict who can use the projector. p.29 • Control Panel Lock restricts button operation on the Control panel You can use this to prevent people changing projector settings without permission at events, in schools, and so on.

  • Page 8: Eb-826W/825/85 Features

    EB-826W/825/85 Features Taking full advantage of a network connection You can make effective use of your network by using the supplied "EPSON Projector Software for Meeting & Monitoring" to perform efficient and varied presentations and meetings. Guide • Connect a Computer to the projector via a network You can project by connecting to an already constructed network system.

  • Page 9: Part Names And Functions

    Front adjustable foot. s Quick Start Guide Extend and adjust the position of the projected image when the projector is placed on a surface such as a desk. s Quick Start Guide Slide shut when not using the projector to protect the lens.

  • Page 10: Rear

    Computer2 Input Port. Also, when you want to output audio from the projector for the following Sources, connect the audio source to the Audio2 port. - USB: When playing back a Slideshow from a USB...

  • Page 11: Base

    Projector Operation Guide Also when the optional Document Camera is connected. USB Port (TypeB) Connects the projector to a computer via the supplied USB cable, and the image on the computer is projected. p.82 Also use this port to connect to a computer via the supplied USB cable to use the wireless mouse function.

  • Page 12: Control Panel

    The color of the indicators and whether they are flashing Status indicators or lit indicate the status of the projector. s [t] button Turns the projector power on or off. s Quick Start Guide [Source Search] Changes to the next input source that is connected to button the projector and is sending an image.

  • Page 13: Remote Control

    Part Names and Functions Remote Control Name [t] button Turns the projector power On or Off. s Quick Start Guide [Computer] button Each time the button is pressed, the image changes from the Computer1 input port to the Computer2 input port.
  • Page 14 825/85 only) s p.17 When using EB-824/84, this does not function even if the button is pressed. Changes to the next input source that is connected to the projector and is sending an image. s Outputs remote control signals. p.16...

  • Page 15: Useful Functions

    Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.

  • Page 16: Changing The Projected Image

    USB Display USB: When image is from a device connected to USB Port (TypeA). LAN: When the projector is connected to a computer via a network, and images from EMP NS Connection are projected. Skipped when no image signal is being input.

  • Page 17: Switch To The Target Image By Remote Control

    Each time the button is pressed, it changes to the image from equipment connected to USB Display/USB port (TypeA). Only changes to USB Display when using the EB-84. When the projector is connected to a computer via a network, you can switch to images projected from EMP NS Connection.(EB-826W/825/85 only)

  • Page 18: Functions For Enhancing Projection

    Functions for Enhancing Projection Selecting the Projection Quality (Selecting Color Mode) You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected. Mode Dynamic Ideal for use in a bright room.

  • Page 19: Setting The Auto Iris

    Functions for Enhancing Projection Setting the Auto Iris By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. Procedure Press the [Menu] button and select Image - Auto Iris from the Configuration Menu.

  • Page 20: Freezing The Image (Freeze)

    Functions for Enhancing Projection Freezing the Image (Freeze) When the moving image on the screen is frozen, the image continues to project, so you can project a moving image one frame at a time like a still photo. Also, you can perform operations such as changing between files during presentations from a computer without projecting any images if the freeze function is activated beforehand.

  • Page 21: Changing The Aspect For Video Equipment Images

    Functions for Enhancing Projection Changing the Aspect for video equipment images EB-825/824/85/84 Each time you press the button, it switches between 4:3 and 16:9. EB-826W Each time the button is pressed, it changes in the order Normal, 16:9, Full, Zoom, and Through. Normal 16:9 Full...

  • Page 22: Changing The Aspect For Computer Images (Eb-825/824/85/84)

    Functions for Enhancing Projection Changing the Aspect for computer images (EB-825/824/85/84) You can change the Aspect as follows. Set Values Projects to the full projection size retaining the Aspect of Normal the input image. Projects to the full projection size at an Aspect of 4:3. This is ideal for when you want to project images at an Aspect of 5:4 (1280 x 1024) to the full projection size.

  • Page 23: Changing The Aspect For Computer Images (Eb-826W)

    Functions for Enhancing Projection Changing the Aspect for computer images (EB-826W) You can change the Aspect as follows. EB-826W offers WXGA 1280x800 resolution (Aspect Ratio 16:10). When projecting onto 16:9 screens, set the Aspect to 16:9. Set Values Projects to the full projection size retaining the Aspect of Normal the input image.
  • Page 24 Functions for Enhancing Projection Set Values Projects at the resolution of the input image size to the Through center of the screen. This is ideal for projecting clear images. If the image resolution exceeds 1280x800, the edges of the image are not projected. If parts of the image are missing, set Wide or Normal in Resolution from the Configuration Menu depending on the size of the computer panel.

  • Page 25: Pointer Function (Pointer)

    Functions for Enhancing Projection Pointer Function (Pointer) This allows you to move a Pointer icon on the projected image, and helps you draw attention to the area you are talking about. Procedure Display the Pointer. Remote Control Each time you press the button, the pointer appears or disappears. Move the Pointer icon ( Remote Control When pressed in conjunction with the adjacent [...

  • Page 26: Enlarging Part Of The Image (E-Zoom)

    Functions for Enhancing Projection Enlarging Part of the Image (E-Zoom) This is useful when you want to expand images to see them in greater detail, such as graphs and tables. Procedure Start E-Zoom. Remote Control Move the ( ) to the area of the image that you want to enlarge.

  • Page 27: Operating The Mouse Pointer By Remote Control (Wireless Mouse)

    Type B is set to USB Display. Change the setting beforehand. When the USB port of a computer and the USB port TypeB on the rear of the projector are connected with the supplied USB cable, you can use the projector's Remote Control like a Wireless Mouse to control the computer's mouse pointer.
  • Page 28 Functions for Enhancing Projection Once the connection has been made, the mouse pointer can be operated as follows. Moving the mouse pointer Mouse clicks Left click: Press the Enter button. Right click: Press the Return button. Double click: Press quickly twice. Drag and drop Switch PowerPoint screens This is useful for displaying the...

  • Page 29: Security Functions

    When Power On Protect is On, you need to enter a preset Password after the projector is plugged in and turned on (this also applies to Direct Power On). If the correct Password is not entered, projection does not start.

  • Page 30: Entering The Password

    "Entering the Password" • When the Password is set, stick the Password protect sticker in a visible position on the projector as a further theft deterrent. Turn on Power On Protect. Select Power On Protect, and then press the [Enter] button.

  • Page 31: Restricting Operation (Control Panel Lock)

    If you continue to repeat the above operation and input the wrong Password thirty times in succession, the following message is displayed and the projector does not accept any more Password entries. The projector's operation will be locked. Contact Epson as described in your documentation. Epson Projector Contact List...

  • Page 32: Anti-Theft Lock

    Anti-Theft Lock As the projector is often setup on ceiling mounts and left in rooms unattended, the projector includes the following security devices to prevent someone from taking the projector.

  • Page 33: Configuration Menu

    Configuration Menu This chapter explains how to use the Configuration Menu and its functions.

  • Page 34: Using The Configuration Menu

    Using the Configuration Menu Selecting from the top menu Selecting from the sub menu Changing the selected item Exit...

  • Page 35: List Of Functions

    List of Functions Image Menu Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details are saved for each image signal and Source. Depending on the model used, some input sources are not supported. Computer Signal/USB /USB Display/LAN Sub Menu Color Mode...

  • Page 36: Signal Menu

    List of Functions Sub Menu Reset You can reset all adjustment values for the Image menu functions to their default settings. To return all menu items to their default settings, see p.52 Signal Menu Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal.

  • Page 37: Settings Menu

    List of Functions Sub Menu Progressive (Component Video can only be adjusted when 480i/576i/1080i signals are being input) Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement. On: Interlace Noise Reduction Smoothes out rough images.
  • Page 38 Mic Input Volume Adjust if the Mic Input level is too low to hear from the projector's speaker, or if the level is too high making the audio crack. When the Mic Input Volume is turned down to 0, no audio is output from the speaker.

  • Page 39: Extended Menu

    : You can set the screen status for when no image signal is available to Black, Blue, or Logo. : You can set whether or not (On/Off) the Startup Screen (the image projected when starting the projector) is displayed. p.76...
  • Page 40 Direct Power On: You can set whether or not (On/Off) to enable Direct Power On. When it is set to On and the power cable is plugged in, be aware that the projector turns on automatically in case such as a power outage is restored.

  • Page 41: Network Menu (Eb-826W/825/85/84 Only)

    Basic Menu, Wireless LAN Menu, Security Menu, Wired LAN Menu, Mail Menu, Others Menu, Reset Menu, Setup complete Menu By using the Web browser of a computer connected to the projector on a network, you can set the functions and control the projector. This function is called Web Control.

  • Page 42: Notes On Operating The Network Menu

    List of Functions Notes on operating the Network menu Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the Configuration Menu. When done, make sure you go to the Setup complete menu, and select one of Yes, No, or Cancel.

  • Page 43: Basic Menu

    Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a Network. s When set to On, you have to enter the Keyword when you try to connect the projector to a computer on a Network. As a result, EMP NS Projector keyword (EB-826W/825/85 only) Connection can prevent presentations from being interrupted by unscheduled connections from a computer during projection.

  • Page 44: Wireless Lan Menu (Eb-826W/825/85 Only)

    : Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses. IP Address : You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.

  • Page 45: Security Menu (Eb-826W/825/85 Only)

    "TKIP" and "AES". WPA also includes user authentication functions. WPA authentication provides two methods: Using an authentication server, or authenticating between a computer and an access point without a server. This projector supports the latter method, without a server. Function...

  • Page 46: When Wep Is Selected

    You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for Encryption key 1 the network in which the projector participates. The type of character and the number that can be entered differ according to the WEP encryption Encryption key 2 Encryption key 3 and Format settings.

  • Page 47: Wired Lan Menu

    : Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses. IP Address : You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.

  • Page 48: Mail Menu

    List of Functions Mail Menu When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail, "Reading Problem Mail Notification Function (EB-826W/825/85/84 only)" Sub Menu Mail Notification You can set whether or not (On/Off) to be notified by e-mail.

  • Page 49: Others Menu

    AMX Device Discovery When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery. Set this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.

  • Page 50: Reset Menu

    List of Functions Reset Menu Resets all of the Network settings. Sub Menu Function Reset network settings. To reset all of the Network settings, select Yes. After you Reset all the settings, the Basic menu appears.

  • Page 51: Info Menu (Display Only)

    Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal and Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not supported.

  • Page 52: Reset Menu

    List of Functions Reset Menu Sub Menu You can reset all items in the Configuration Menu to their default settings. Reset All The following items are not reset to their defaults: Input Signal, User's Logo, all items for Network menus, Lamp Hours, and Language. Reset Lamp Hours You can clear the cumulative Lamp Hours use time, and return it to "0H".

  • Page 53: Troubleshooting

    Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.

  • Page 54: Using The Help

    Using the Help If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the [Help] button. You can solve problems by answering the questions. Procedure Press the [Help] button. The Help screen is displayed.

  • Page 55: Problem Solving

    Problem Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help".

  • Page 56: Indicator Is Lit Or Flashing Red

    • Check that the air filter and Air exhaust vent are clear, and that the projector is not positioned against a wall. • If the air filter is clogged, clean or replace it. s p.67, If the error continues after checking the points above, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.

  • Page 57: M O Indicator Is Flashing Or Lit Orange

    • If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" p.58. • If the error is not indicated in this table, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.

  • Page 58: When The Indicators Provide No Help

    (Computer monitors and LCD screens have different color reproduction performance, so that the colors projec‐ ted by the projector and the colors appearing on the monitor may not necessarily match, but this is not a sign of a problem.) •...

  • Page 59: Problems Relating To Images

    Press the [t] button to turn the power on. The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly. s Quick Start Guide Check that your electrical outlet or power source is functioning correctly.
  • Page 60 Computer's documentation, under a title such as "External output" or "Connecting an external monitor". If the connection is made while the power of the projector or computer is already turned on, the function [Fn] key that changes the computer's image signal to external output may not work. Turn the power for the computer and the projector off and then back on again.
  • Page 61 Set the projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and wait for the condensation to disappear.
  • Page 62 To display the entire image on the computer screen, turn off the dual display setting. s Computer video driver documentation Set the computer so that the signals being output are compatible with the projector. s "Supported Monitor Displays"...

  • Page 63: Problems When Projection Starts

    Check that your electrical outlet or power source is functioning correctly. this does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Contact List Press the [t] button on the Remote Control.
  • Page 64 The operating range for the remote control is about 6 m. s Quick Start Guide Set the projector up in a location where strong light does not shine onto the Remote Receiver. Or set the remote receiver to Off from Remote Receiver in the Configuration Menu. s Settings Menu - Remote Receiver Check the Remote Receiver from the Configuration Menu.

  • Page 65: Appendix

    Appendix This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.

  • Page 66: Installation Methods

    Attention Do not use the projector on its side. This may cause malfunctions to occur. • Project images from in front of • Project images from behind a the screen.

  • Page 67: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Cleaning the Projector's Surface Clean the projector's surface by wiping it gently with a soft cloth. If the projector is particularly dirty, moisten the cloth with water containing a small amount of neutral detergent, and then firmly wring the cloth dry before using it to wipe the projector's surface.

  • Page 68: Replacing Consumables

    Replacing Consumables This section explains how to replace the Remote Control batteries, the Lamp, and the air filter. Replacing the Remote Control Batteries If delays in the responsiveness of the Remote Control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat.

  • Page 69: Replacing The Lamp

    Lamp cover, not underneath it. Remove the Lamp cover gently. • Never disassemble or remodel the Lamp. If a remodeled or reassembled Lamp is installed into the projector and used, it could cause a fire, electric shock, or an accident.
  • Page 70 Lamp to be cool enough. Procedure After you turn off the projector's power and the confirmation buzzer beeps twice, disconnect the power cable. Wait until the Lamp has cooled down, then remove the Lamp cover.
  • Page 71 If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. List Epson Projector Contact Install the new Lamp. Insert the new Lamp along the guide rail in the correct direction so that it fits in place, push down firmly at the location marked...

  • Page 72: Resetting The Lamp Hours

    Resetting the Lamp Hours The projector records how long the lamp is turned on and a message and indicator notify you when it is time to replace the lamp. After replacing the Lamp, make sure you reset the Lamp Hours from the Configuration Menu.
  • Page 73 Replacing Consumables Open the air filter cover. Slide the air filter cover open/close switch, and open the air filter cover. Remove the air filter. Grip the tab in the center of the air filter, and pull it straight out. Install the new air filter. Press until it clicks into place.
  • Page 74 Replacing Consumables Close the air filter cover. Dispose of used air filters properly in accordance with your local regulations. Material of the frame part: ABS Material of the filter part: Polyurethane foam...

  • Page 75: Optional Accessories And Consumables

    Quick Wireless Connection USB Key ELPAP05 (EB-826W/825/85 only) Use this key to connect to a Windows computer and project images from the computer. However, the projector needs to be connected to a network before it can be used. Ceiling pipe (450 mm) ELPFP13...

  • Page 76: Saving A User's Logo

    Saving a User's Logo You can save the image that is currently being projected as a User's Logo. When a User's Logo is saved, the previous User's Logo is erased. Procedure Project the image you want to use as the User's Logo, and then press the [Menu] button.
  • Page 77 • Once a User's Logo has been saved, the logo cannot be returned to the factory default. • Saving the user's logo may take approximately 15 seconds. Do not use the projector or any connected equipment while it is saving, otherwise malfunctions may occur.

  • Page 78: Screen Size And Projection Distance

    Screen Size and Projection Distance To find the appropriate screen size, see the following table to setup the projector. Values are just reference. Projection distance is the distance from the center of the lens to the base of the screen...
  • Page 79 Screen Size and Projection Distance 4:3 Screen Size Minimum (Wide) to Maximum (Tele) 40" 81x61 134 - 219 50" 100x76 169 - 275 60" 120x90 203 - 331 80" 160x120 271 - 442 100" 200x150 340 - 553 120" 240x180 408 - 664 150"...

  • Page 80: Connecting And Removing Usb Devices

    When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. • Connect a digital camera or hard disk to the projector using a USB cable provided with, or specified for use with the device. •...

  • Page 81: Removing Usb Devices

    After finishing projecting, follow the procedure below to remove USB devices from the projector. Procedure Remove the optional Document Camera from the projector's USB Port (TypeA). For digital cameras, hard disks, and so on, turn off the power to the...

  • Page 82: Connecting With A Usb Cable And Projecting (Usb Display)

    Connecting with a USB cable and Projecting (USB Display) By using the supplied USB cable to connect the projector to a Windows computer you can project images from the computer.This function is called USB Display. Simply by connecting via a USB cable, images from the computer can be displayed.

  • Page 83: Connecting For The First Time

    Procedure Driver installation starts automatically. When you are using a Windows 2000 computer, click Computer - All Programs - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.x. When using a computer running Windows 2000 under user authority, a Windows error message is displayed during installation and you may not be able to install the software.

  • Page 84: From The Second Time

    • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE, on your computer. • If the mouse pointer flickers on the computer screen, click All Programs - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.x, and then clear the Transfer layered window checkbox.

  • Page 85: Connecting A Lan Cable (Eb-826W/825/85/84 Only)

    Connecting a LAN Cable (EB-826W/825/85/84 only) Connect with a commercially available 100BASE-TX or 10BASE-T LAN cable. Depending on the model, the following diagrams and interfaces may differ. To LAN port LAN cable (commercially available) To LAN port Attention To prevent malfunctions, use a category 5 shielded LAN cable.

  • Page 86: Installing The Wireless Lan Unit (Eb-826W/825/85 Only)

    Installing the Wireless LAN Unit (EB-826W/825/85 only) Procedure Open the air filter cover. Slide the air filter cover open/close switch, and open the air filter cover. Install the Wireless LAN unit. Secure the Wireless LAN unit using the screw included to avoid losing the unit.

  • Page 87: Connecting To External Equipment

    825/85/84 only) You can display computer images input from Computer1/2 Input Port on an external monitor and the screen connected to the projector at the same time. This means that you can check projected images on an external monitor when giving presentations even if you cannot see the screen.

  • Page 88: Connecting To An External Speaker (Eb-826W/825/85/84 Only)

    Connecting to External Equipment Connecting to an external speaker (EB-826W/ 825/85/84 only) You can connect speakers with built-in amplifiers to the projector's Audio Out port to enjoy a fuller quality of sound. Connect with a commercially available audio cable (such as pin plug mini plug).

  • Page 89: Reading Problem Mail Notification Function

    Subject: EPSON Projector Line 1: The Projector Name where the problem has occurred Line 2: The IP Address set for the projector where the problem has occurred. Line 3 and on: Details of the problem The details of the problem are listed line by line.

  • Page 90: Esc/Vp21 Commands

    ESC/VP21 Commands Command List When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command.

  • Page 91: Communications Protocol

    ESC/VP21 Commands • Projector input port name: RS-232C <At the projector> <At the projector> (PC serial cable) Signal Name Function Signal wire ground Transmit data Receive data Data set ready Data terminal ready Communications protocol • Default baud rate setting: 9600 bps •...

  • Page 92: About Pjlink

    PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA.

  • Page 93: Supported Monitor Displays

    Supported Monitor Displays Supported Monitor Displays (EB-825/824/85/84) Computer signals (analog RGB) Signal Refresh Rate (Hz) VGAEGA 60/72/75/85/iMac SVGA 56/60/72/75/85/iMac 60/70/75/85/iMac WXGA 60/75/85 WXGA+ 60/75/85 SXGA 70/75/85 60/75/85 60/75/85 SXGA+ 60/75/85 UXGA MAC13" MAC16" MAC19" MAC21" *1 Connection is disabled if the equipment does not have a VGA output port. *2 Letterbox signal Even when signals other than those mentioned above are input, it is likely that the image can be projected.

  • Page 94: Component Video

    Supported Monitor Displays Component Video Signal SDTV(480i) SDTV(576i) SDTV(480p) SDTV(576p) HDTV(720p) HDTV(1080i) HDTV(1080p) * Letterbox signal Composite Video/S-Video Signal TV(NTSC) TV(PAL,SECAM) * Letterbox signal Refresh Rate (Hz) Resolution 720x480/720x360 720x576/720x432 720x480/720x360 720x576/720x432 50/60 1280x720 50/60 1920x1080 50/60 1920x1080 Refresh Rate (Hz) Resolution 720x480/720x360 720x576/720x432...

  • Page 95: Supported Monitor Displays (Eb-826W)

    Supported Monitor Displays Supported Monitor Displays (EB-826W) Computer signals (analog RGB) Signal Refresh Rate (Hz) VGAEGA 60/72/75/85/iMac SVGA 56/60/72/75/85/iMac 60/70/75/85/iMac WXGA 60/75/85 WXGA+ 60/75/85 WSXGA+ SXGA 70/75/85 60/75/85 60/75/85 SXGA+ 60/75/85 UXGA MAC13" MAC16" MAC19" Resolution Normal 640x350 1280x700 640x480/640x360 1066x800 800x600/800x450 1066x800...

  • Page 96: Component Video

    Supported Monitor Displays Signal Refresh Rate (Hz) MAC21" *1 Connection is disabled if the equipment does not have a VGA output port. *2 Letterbox signal *3 Only compatible when Wide is selected as the Resolution from the Configuration Menu. s Even when signals other than those mentioned above are input, it is likely that the image can be projected.

  • Page 97: Specifications

    Specifications Projector General Specifications Product name Dimensions Panel size Display method Resolution Focus adjustment Zoom adjustment Lamp Max. audio output Speaker Power supply Power 100 to 240 V area consumption 200 to 240 V area Operating altitude Operating temperature Storage temperature...
  • Page 98 * Supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB. This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Pixelworks DNX ICs are used in this projector. EB-826W EB-825...

  • Page 99: Software Requirement

    Specifications Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident. Software Requirement The software supplied with the projector or the optional accessories runs on computers that meet the following requirements.
  • Page 100 Specifications DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or Personal Computers Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel: 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.

  • Page 101: Appearance

    Appearance Center of lens * Distance from center of lens to suspension bracket fixing point Units: mm...

  • Page 102: Glossary

    Glossary This section explains easily terms that are used with the projector and difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
  • Page 103 An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by sRGB computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB.

  • Page 104: General Notes

    Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
  • Page 105 General Notes The list of GPL Programs is as follows and the names of author are described in the source code of the GPL Programs The list of GPL Programs busybox-1.7.2 libgcc1(gcc-4.2.3) linux-2.6.20 patches udhcp 0.9.8 uvc rev.219 wireless_tools 29 Pixelworks PWC950 SDK drivers The GNU General Public License Version 2 is as follows.
  • Page 106 General Notes You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
  • Page 107 General Notes You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
  • Page 108 General Notes NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"...
  • Page 109 If you desire to receive the source code of the LGPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region. These LGPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 110 General Notes Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
  • Page 111 General Notes The modified work must itself be a software library. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
  • Page 112 General Notes If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
  • Page 113 General Notes You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
  • Page 114 That's all there is to it! BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License".
  • Page 115 THE POSSIBILITY OF SUCH DAMAGE. libjpeg This projector product includes the open source software program "libjpeg" which applies the terms and conditions provided by owner of the copyright to the "libjpeg". The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 116 CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated." libpng This projector product includes the open source software program "libpng" which applies the terms and conditions provided by owner of the copyright to the "libpng". The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 117 September 12, 2004 zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 118 1999-05-03 lpd Original version. ncurses This projector product includes the open source software program "ncurses" which applies the terms and conditions provided by owner of the copyright to the "ncurses". The "ncurses" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 119 General Notes THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

  • Page 120: Index

    Brightness Control... 38 Ceiling... 39 Ceiling mount fixing points... 11 Cleaning the Air filter and Air intake vent ... 67 Cleaning the Projector's Surface... 67 Color Adjustment... 35 Color Mode... 18, 35 Color Saturation... 35 Computer1 Input Port... 10 Computer2 Input Port... 10 Configuration Menu...
  • Page 121 Power indicator... 55 Power inlet... 10 Power On Protect... 29 Presentation... 18 Problem Solving... 55 Progressive... 37 Projection... 39 Projector Name... 43 Rear... 39 Rear foot... 11 Rear screen... 66 Refresh Rate... 51 Remote Control... 13 Remote Receiver... 9, 10 Replacing batteries...

This manual is also suitable for:

Eb-825Eb-826wEb-84Eb-85

Table of Contents