1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EMP 720
  6. User manual

Epson EMP-720 User Manual

Epson user guide projector emp-720, emp-730
Hide thumbs Also See for EMP-720:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Reference Manual

Advertisement

Table of Contents
loading

Related Manuals for Epson EMP-720

Summary of Contents for Epson EMP-720

  • Page 2: About The Manuals And Notations Used

    About The Manuals and Notations Used Types of Manual The documentation for your EPSON projector is divided into the following three manuals. The manuals cover the following topics. Safety Instructions/World-Wide Warranty Terms This manual contains information on using the projector safely, and also includes world- wide warranty terms and a troubleshooting check sheet.

  • Page 3: Unpacking The Projector

    Unpacking the Projector When you unpack the projector, make sure that you have all these components. If any of the components are missing or incorrect, please contact the place of purchase. Projector (with lens cover) Computer cable (mini D-Sub 15-pin/mini D- Sub 15-pin 1.8 m (6 ft.))

  • Page 4: Features Of The Projector

    Compact and lightweight The projector has a compact body with a footprint the size of a B5 page (19 (D) x 27.6 (W) x 7 (H) cm (7.5 (D) x 10.9 (w) x 2.8 (H))) and is light in weight (approximately 1.9 kg.

  • Page 6: Table Of Contents

    Projecting RGB Video Images... 25 Playing Sound from the Video Equipment ... 26 Basic Operations Turning On the Projector ... 28 Connecting the Power Cable... 28 Turning On the Power and Projecting Images ... 29 Turning Off the Projector ... 31 Adjusting the Screen Image...
  • Page 7 Adjusting the Image Quality ... 37 Focusing the Screen Image ... 37 Adjusting Computer Images ... 37 Selecting the Colour Mode ... 40 Advanced Operations Functions for Enhancing Projection ... 42 A/V Mute ... 42 Freeze... 43 Wide-screen Projection of Component Video and Video Images (Changing the Aspect Ratio) ...

  • Page 9: Before Using The Projector

    Before Using the Projector This chapter describes the procedures for setting up the projector before use. Part Names and Functions ...8 • Front/Top ... 8 • Control Panel... 9 • Rear ... 10 • Base ... 10 • Remote Control ... 11 Before Using the Remote Control ...12...

  • Page 10: Part Names And Functions

    Receives signals from the remote control. • • • • Flashes or lights in different colours to indicate problems with the projector or that the projection lamp needs to be replaced. • • • • Power indicator (p.61) Flashes or lights in different...

  • Page 11: Control Panel

    Control Panel • • • • [Power] button (p.29, 31) Turns the projector power on and off. • • • • [Source] button (p.30) Switches the input source between the Computer/Component Video port, S- Video port and Video port each time the button is pressed.

  • Page 12: Rear

    Part Names and Functions Rear • • • • Video port (p.23) Inputs composite video the projector from other video sources. Use the RCA video cable for this connection. • • • • S-Video port (p.24) Inputs S-Video signals to the projector from other video sources.

  • Page 13: Remote Control

    Acts as a mouse right-click when using the remote control as a wireless mouse. [Power] button (p.29, 31) Turns the projector power on and off. [Color Mode] button (p.40) Selects the colour mode. The colour mode changes in the order of Normal,...

  • Page 14: Before Using The Remote Control

    Tip : • Do not allow sunlight or light from fluorescent lamps to shine directly onto the projector's remote control light-receiving areas, otherwise it may interfere with the reception of signals from the remote control. • If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the battery is getting flat.
  • Page 15 Remote Operating Range Use the remote control within the ranges indicated below. If the distance or angle between the remote control and the remote control light-receiving area is outside the normal operating range, the remote control may not work. Operating distance Approx.

  • Page 16: Installation

    • Front projection • Front/ceiling projection * A special method of installation is required in order to suspend the projector from the ceiling. Please contact the place of purchase if you would like to use this installation method. The optional ceiling mount is required when installing the projector to the ceiling.

  • Page 17: Screen Size And Projection Distance

    Tip : • The projector's lens allows a zoom ratio of up to about 1.16. The image size at the maximum zoom setting is about 1.16 times bigger than the image size at the minimum zoom setting.

  • Page 18: Connecting To A Computer

    When connecting the projector to a computer, be sure to check the following. • Turn off the power for both the projector and the computer before connecting them. If the power for either device is on at the time of connection, damage may result.

  • Page 19: Projecting Images From The Computer

    • Change the "Input Signal" setting in the "Video" menu to "RGB" after making the connections. (p.47) • If more than one external component is connected to the projector, use the [Source] button on the projector's control panel or the [Computer] button on the remote control to select the Computer port as the input source.

  • Page 20: If The Monitor Port Is A 5Bnc Port

    If the Monitor Port is a 5BNC Use the optional VGA-HD15 PC cable to connect the Computer/Component Video port at the rear of the projector to the monitor port of the computer. See "Appendices: Optional Accessories" (p.82) To monitor port Tip : •...

  • Page 21: If The Monitor Port Is A 13W3 Port

    • Change the "Input Signal" setting in the "Video" menu to "RGB" after making the connections. (p.47) • If more than one external component is connected to the projector, use the [Source] button on the projector's control panel or the [Computer] button on the remote control to select the Computer port as the input source.

  • Page 22: Playing Sound From The Computer

    Connecting to a Computer Playing Sound from the Computer The projector has a single built-in speaker with a maximum output of 1 W. If the computer that is connected to the projector has an audio output port, you can output sound from the computer through the projector's speaker by...

  • Page 23: Using The Remote Control To Operate The Mouse Pointer (Wireless Mouse Function)

    You can use the remote control as a wireless mouse to control the mouse pointer on the computer screen. To do this, you must use the accessory USB connect the USB port of the computer to the USB port at the rear of the projector. Computer Windows 98/2000/Me/...
  • Page 24 Connecting to a Computer Once the connection has been made, the mouse pointer can be operated as follows. Moving the mouse pointer Press the [ ], [ ], [ ] or [ ] button to move the mouse pointer in the direction of the button pressed.

  • Page 25: Connecting To A Video Source

    When connecting the projector to other video sources, take the following precautions. • Turn off the power for both the projector and the video source before connecting them. If the power for either device is on at the time of connection, damage may result.

  • Page 26: Projecting S-Video Images

    • Change the "Input Signal" setting in the "Video" menu to "YCbCr " or "YPbPr " after making the connections. (p.49) • If more than one external component is connected to the projector, use the [Source] button on the projector's control panel or the [Computer] button on the remote control to set the input source to "YCbCr "...

  • Page 27: Projecting Rgb Video Images

    RGB video is used when RGB signals that have copy protection added are input and projected. Use the accessory computer cable to connect the video source to the Computer/Component Video port on the rear of the projector. To RGB output port Tip : •...

  • Page 28: Playing Sound From The Video Equipment

    Connecting to a Video Source Playing Sound from the Video Equipment The projector has a single built-in speaker with a maximum output of 1 W. You can output sound from the video equipment through the projector's speaker by connecting the video equipment's audio output port and the Audio-In port (stereo mini jack) at the rear of the projector using a stereo mini jack audio cable (commercially-available).

  • Page 29: Basic Operations

    Basic Operations This chapter describes basic operations such as turning projection on and off and adjusting the projected images. Turning On the Projector ...28 • Connecting the Power Cable... 28 • Turning On the Power and Projecting Images... 29 Turning Off the Projector ...31 Adjusting the Screen Image ...33...

  • Page 30: Turning On The Projector

    Be sure to read the separate Safety Instructions/World-Wide Warranty Terms before projecting images. Connecting the Power Cable Procedure Check that the power is turned off for the projector and all components connected to the projector. Connect the computer or other video source to the projector. (p.17, 23) Remove the lens cover.

  • Page 31: Turning On The Power And Projecting Images

    (it normally takes about 40 seconds to change). Tip : The projector's control panel and remote control buttons cannot be operated while the Power indicator is flashing green. Depending on the settings, the message "No-Signal." may appear. See "Setting" - "No- Signal Msg."...
  • Page 32 • If a laptop computer or a computer with an LCD screen has been connected to the projector, the images may not be projected straight away. After making the connections, check that the computer has been set up to output signals externally.

  • Page 33: Turning Off The Projector

    Turning Off the Projector Follow the procedure below to turn off the power of the projector. Procedure Turn off the power for the signal sources that are connected to the projector. Check that the power for all connected components has been turned off.
  • Page 34 Caution : Do not disconnect the power cable from the outlet while the Power indicator is still flashing orange, otherwise it may result in errors in projector operation and reduce the lamp unit operating life. Retract the front adjustable feet if they are extended.

  • Page 35: Adjusting The Screen Image

    Tip : The E-Zoom function lets you enlarge parts of the image. (p.45) Procedure Turn the zoom ring on the projector to adjust the image. The image can be enlarged in this way to 1.16 times the normal size.

  • Page 36: Adjusting The Image Angle And Automatic Keystone Correction Function

    Centre of lens If it is not possible to set up the projector so that it is perpendicular to the screen, it can be set up at a slight vertical angle instead. You can extend or retract the front adjustable feet to adjust the projection angle within a maximum range of 11º.
  • Page 37 To retract the front adjustable feet, gently push down on the projector while pressing the two foot adjust buttons. Tip : • If the projector is tilted horizontally, turn the bases of the front adjustable feet to adjust the angle. Front adjustable foot...

  • Page 38: Manually Correcting Keystone Distortion

    • If the value displayed in the gauge on the screen stops changing when keystone correction is being carried out, it indicates that the limit for keystone correction has been exceeded. Check that the projector has not been set up at an angle which exceeds the proper limit.

  • Page 39: Adjusting The Image Quality

    If this happens, clean or de-mist the lens. (p.66, 72) • If the projector is positioned outside the normal projecting range of 1.0–11.7 m (3.2– 38.5 ft.), it may not be possible to obtain the correct focus. If you have trouble obtaining the correct focus, check the projection distance.

  • Page 40: Adjusting The Tracking

    Adjusting the Image Quality • If you press the [Auto] button while the E-Zoom or Freeze function is being used or while a configuration menu or help menu is being displayed, the function will be cancelled when you press the [Auto] button, and then the adjustment will be carried out.

  • Page 41: Adjusting The Sync

    Adjusting the Sync If flickering, fuzziness or interference appear in images that are input from the computer, and this cannot be fixed using automatic setup, you will need to adjust the sync using the following procedure. Procedure Press the [Menu] button on the remote control, and then select "Sync."...

  • Page 42: Selecting The Colour Mode

    (p.47, 49) Application Images conform to the sRGB colour standard. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB. Brightness is emphasised. For presentation in bright rooms. Images are modulated using their original tints, with no colour enhancement.
  • Page 43 Advanced Operations This chapter describes functions for enhancing the projection of images, and how to use the configuration menus. Functions for Enhancing Projection...42 • A/V Mute ... 42 • Freeze ... 43 • Wide-screen Projection of Component Video and Video Images (Changing the Aspect Ratio)...

  • Page 44: Functions For Enhancing Projection

    (p.51) Solid black Solid blue User's logo Default setting Tip : The default user's logo is the EPSON logo. You can change the user's logo by recording and setting your own logo. (p.80)

  • Page 45: Freeze

    Freeze This function pauses only the projected images. The sound keeps playing without pausing. The image source will still be playing back the images even while projection is paused, and so it will not be possible to resume projection from the point where it was paused.

  • Page 46: Wide-Screen Projection Of Component Video And Video Images (Changing The Aspect Ratio)

    Functions for Enhancing Projection Wide-screen Projection of Component Video and Video Images (Changing the Aspect Ratio) This function changes the aspect ratio component video images (YCbCr and YPbPr) or video images (S-Video or composite video) are being projected. Images which have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format.

  • Page 47: E-Zoom

    E-Zoom This function lets you enlarge and reduce a part of projected images such as graphs and tables. Procedure Press the [E-Zoom remote control. A cursor (cross) indicating the centre point for the area to be enlarged will appear on the screen. Move the cross to the area of the image that is to be enlarged or reduced.

  • Page 48: Using The Configuration Menu Functions

    Using the Configuration Menu Functions The configuration menus can be used to carry out a variety of settings and adjustments. The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus. The remote control is used to operate the menus.
  • Page 49 "Video" Menu Sub-menu Position Moves the image display position vertically and horizontally. • Press the [Enter] button and make the adjustment using the display position adjustment sub-menu that appears. Tracking Adjusts computer images when vertical stripes appear in the images. Sync.
  • Page 50 Using the Configuration Menu Functions Sub-menu Reset Resets all adjustment values for the "Video" menu functions except for the "Input Signal" setting to their default settings. • Press the [Enter] button to display the confirmation screen, and select "Yes". • Select "Reset All" to return all menu settings to their default settings.
  • Page 51 Sub-menu Color Mode Corrects the vividness of the image colour. The settings can be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings. • sRGB : Images conform to the sRGB standard.* •...

  • Page 52: Audio" Menu

    Using the Configuration Menu Functions "Audio" Menu Video Volume Audio Tone Setting Reset User's Logo Advanced About Reset All : Select : Enter Sub-menu Volume Adjusts the volume. Tone Adjusts the tone. Reset Resets all adjustment values for the "Audio" menu functions to their default settings.
  • Page 53 Auto Sets the function for automatically correcting keystone Keystone distortion when the angle of the projector has been adjusted to ON or OFF. This function is only enabled when the "Rear Proj. " and "Ceiling" commands in the "Advanced" menu are set to "OFF". If either "Rear Proj. "...

  • Page 54: User's Logo" Menu

    Sets whether the startup screen is displayed or not. Screen • To change the user's logo, you need to record and set your own logo. Execute Function Select [English] ON OFF Color Temp. Adjust ON OFF ON OFF ON OFF Execute Function Default EPSON logo Default English...
  • Page 55 When set to "ON", the projected images are horizontally reversed. Ceiling Use when installing the projector to a ceiling. When set to "ON", the projected images are horizontally and vertically reversed. Link21L Sets whether the "EMP Link21L " utility software is being used or not.

  • Page 56: About" Menu

    Using the Configuration Menu Functions "About" Menu • The "About" menu shows the setting details for the current image source. • The "Lamp" item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour. Computer/RGB video/ Component video (Analogue-RGB, YCbCr , YPbPr )

  • Page 57: Reset All" Menu

    Sub-menu SYNC Mode Displays the sync attributes. (Does not appear when the input source is composite video or S-Video.) Resolution Displays the input resolution. (Does not appear when the input source is composite video or S-Video.) Refresh Displays the refresh rate. Rate (Does not appear when the input source is composite video or S-Video.)

  • Page 58: Using The Configuration Menus

    Using the Configuration Menu Functions Using the Configuration Menus The configuration menus can be operated using the remote control only. Procedure Press the [Menu] button on the remote control. The main menu will be displayed. Select a menu item. Press the [ ] or [ ] button to move to an item to be selected.
  • Page 59 Select a setting value. Press the [ ] and [ ] buttons to change the setting value. For commands which have ON/OFF settings, use the [ ] and [ ] buttons to select the desired setting, and then press the [Enter] button. Tip : •...

  • Page 61: Troubleshooting

    Troubleshooting This section describes how to identify problems and what to do if a problem is found. Using the Help ...60 When Having Some Trouble ...61 • Power Indicator... 61 • (Warning) Indicator ... 62 When the Indicators Provide No Help...64...

  • Page 62: Using The Help

    Using the Help If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. Procedure Press the [Help] button on the projector's control panel.

  • Page 63: When Having Some Trouble

    When Having Some Trouble If you are having a problem with the projector, first check the projector's indicators. The projector is provided with the following two indicators. These indicators alert you to problems with projector operation. Power indicator The following tables show what the indicators mean and how to remedy problems that they indicate.

  • Page 64: (Warning) Indicator

    [Power] button on either the projector's control panel or the remote control to turn it back on. If the projector continues to overheat even after the above points have been checked, or if the indicators show a problem...
  • Page 65 Tip : • If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" on the following page. • If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided at "International Warranty...

  • Page 66: When The Indicators Provide No Help

    • Was the power turned off and then straight back on again? After the power is turned off (during cool-down ), the [Power] buttons on the projector's control panel and the remote control will not work. Wait until cool-down has finished. You can then use the [Power] buttons. (p.31) •...
  • Page 67 • • • • The whole image is The recommended distance from the projector to the screen out of focus is within 1.0–11.7 m (3.2–38.5 ft.). Set up the projector so that the projection distance is within this range. (p.15)
  • Page 68 • Is the lens dirty? (p.72) • Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a warm environment, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy.
  • Page 69 • Are the image signal format settings correct? If a computer, component video connected to the projector, use the "Input Signal" command in the "Video" menu to select the signal format which matches the signal connected source. (p.47, 49) If a composite video the projector, use the "Video Signal"...
  • Page 70 "YPbPr" or "YCbCr" when a computer is connected, the projected images will appear purplish. If a computer, component video connected to the projector, use the "Input Signal" command in the "Video" menu to select the signal format which matches the signal connected source. (p.47, 49)
  • Page 71 • Has the volume been adjusted to the minimum setting? (p.50) • Is A/V Mute mode active? The projector may be in A/V Mute mode. Press the [A/V Mute] button on the remote control to cancel the A/V Mute. (p.42) The remote control does not work •...
  • Page 72 The power does not turn off (after the [Power] button is pressed) • The Power indicator remains orange. This projector is designed so that the Power indicator remains lit even when after the power has been turned off. The Power indicator will switch off when the power cable is disconnected from the electrical outlet.

  • Page 73: Appendices

    Appendices This chapter provides information on maintenance procedures to ensure the best level of performance for the projector for a long time. Maintenance...72 • Cleaning ... 72 • Cleaning the Projector Case... 72 • Cleaning the Lens ... 72 • Cleaning the Air Filter ... 73 •...

  • Page 74: Maintenance

    If the projector is particularly dirty, moisten the cloth with water containing a small amount of neutral detergent, and then firmly wring the cloth dry before using it to wipe the projector case. Then wipe the case again with a soft, dry cloth.

  • Page 75: Cleaning The Air Filter

    Cleaning the Air Filter If the air filter becomes clogged with dust, it can cause overheating and damage the projector. While keeping the projector horizontal, use a vacuum cleaner to clean away the dust from the air filter. Tip : •...

  • Page 76: Replacing Consumables

    Maintenance Replacing Consumables This section describes how to replace the remote control battery, the lamp and the air filter. Inserting the Battery Use the following type of battery as a replacement. 1 CR2025 lithium battery Caution : Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the battery.

  • Page 77: Lamp Replacement Period

    Lamp Replacement Period It is time to replace the lamp when: • The message "Lamp Replace." appears on the screen for 30 seconds when projection starts A message will be displayed. • When the (Warning) indicator is flashing red at 0.5-second intervals •...

  • Page 78: Replacing The Lamp

    • If the lamp stops working and needs to be replaced, there is the danger that the lamp may break when handled. If replacing the lamp of a projector that has been installed to the ceiling, you should always assume that the lamp is broken and remove the lamp cover very carefully.
  • Page 79 Take out the lamp. Hold the lamp by the two recesses on the side to lift it up and out from the projector. Install the new lamp. Hold the lamp so that it faces the correct way to fit into the projector, and then insert the lamp until it clicks into place and tighten the two fixing screws.

  • Page 80: Resetting The Lamp Operating Time

    Maintenance Resetting the Lamp Operating Time The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore, the counter needs to be reset after the lamp has been replaced with a new one.

  • Page 81: Replacing The Air Filter

    Replacing the Air Filter Procedure Turn off the projector power, wait for the cool-down and then disconnect the power cable. The cool-down period lasts for about 45 seconds. The actual time will vary depending on the external air temperature. Put your finger into the recess in the air filter hook, and lift up the air filter to remove it.

  • Page 82: Saving A User's Logo

    Saving a User's Logo You can record the image that is currently being projected as a user's logo. Tip : When a user's logo is recorded, the previous user's logo will be erased. Procedure Project the image that you would like to use as a user's logo, and then press the [Menu] button on the remote control.
  • Page 83 • Saving the user's logo may take a few moments (about 15 seconds). Do not use the projector or any other sources which are connected to the projector while the user's logo is being saved, otherwise it may result in errors in projector operation.

  • Page 84: Optional Accessories

    Pipe 570 (570 mm (22.44 inches)/silver)* ELPFP05 Pipe 770 (770 mm (30.31 inches)/silver)* ELPFP06 Use when installing the projector to a high ceiling or a ceiling with veneer panels. Image presentation camera ELPDC02 Use when projecting books, OHP films and slides.

  • Page 85: Glossary

    A utility software program that allows the projector to be connected to a computer so that the computer can be used to control the projector. Link21L For details on acquiring the software and for instructions on using the software and compatible projector models, please contact one of the service offices provided in the catalog.
  • Page 86 Security A device consisting of a projector case with a hole in it that a commercially-available theft-prevention cable can be passed through in lock order to secure the device to a table or pillar. This projector is compatible with the Microsaver Security System manufactured by Kensington.
  • Page 87 UXGA A type of video signal with a resolution of 1600 (horizontal) x 1200 (vertical) dots which is used by IBM PC/AT-compatible computers. A type of video signal with a resolution of 640 (horizontal) x 480 (vertical) dots which is used by IBM PC/AT-compatible computers. A type of video signal with a resolution of 1024 (horizontal) x 768 (vertical) dots which is used by IBM PC/AT-compatible computers.

  • Page 88: List Of Esc/Vp21 Commands

    List of ESC/VP21 Commands Command List When a power ON command is sent to the projector, the power for the projector turns on. When the projector is in a command ready state, it returns the "3Ah" (:) code. Furthermore, when command processing is complete, the projector also returns a ":"...

  • Page 89: Usb Connection Setup

    Turn off the power for the projector. After the cool-down power back on. Once the projector's power has turned back on, communication via a USB Connection will then be possible. utility software from the EPSON period has finished, turn the projector's...

  • Page 90: List Of Supported Monitor Displays

    List of Supported Monitor Displays Signal PC98 VGACGA VGAEGA VGA text VESA SVGA SXGA SXGA SXGA UXGA MAC13" MAC16" MAC19" MAC19" MAC21" NTSC PAL/SECAM HDTV (525i) HDTV(525p) HDTV(750p) HDTV(1125i) * Connection is not possible if the equipment does not have a VGA output port. It may be possible to project signals which are not listed in the above table.

  • Page 91: Specifications

    Specifications Product name Multimedia Projector EMP-730/720 Dimensions 276 (W) x 70 (H) x 190 (D) mm (10.9 (W) x 2.8 (H) x 7.5 (D) in.) (not including feet) Panel size 0.9 inches Display method Polysilicon TFT active matrix Drive method...
  • Page 92 Specifications Safety UL1950 3 Edition Canada CSA C22.2 No.950-95 (cUL) European Community The Low Voltage Directive (73/23/EEC) IEC60950 2 FCC 47CFR Part15B Class B (DoC) Canada ICES-003 Class B European Community The EMC Directive (89/336/EEC) EN55022, 1998 Class B EN55024, 1998 IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC61000-4-11, IEC61000-3-2, IEC61000-3-3...

  • Page 93: Appearance

    Appearance 78.5 M3X8-3 13.4 89.9 103.5 38.8 Units: mm...

  • Page 94: Index

    Battery holder ... 74 Brightness ... 47, 48 Ceiling... 14, 53 Cleaning the Air Filter ... 73 Cleaning the Lens ... 72 Cleaning the Projector Case... 72 Color Adjustment... 53 Color Mode Prompt ...51 Color Mode ...40, 47, 49 Color temperature ... 53 Color ...
  • Page 95 Reset Lamp Timer ...54, 78 Resized display...88 Resolution ...55, 88 RGB...53 Screen size...15 Security lock...8 "Setting" Menu...50 Setting Up the Projector ...14 Sharpness...47, 48 Sleep mode ...51 Speaker ...10, 20, 26 Specifications ...89 Squeeze mode...44 sRGB ...40, 47, 49 Startup screen ...52 Stereo mini jack audio cable ...20, 26...
  • Page 96 Index USB cable ... 1, 21 USB connection setup... 87 USB mouse ... 21 USB port ...10 "User's Logo" Menu...52 User's Logo ... 42, 80 Using the Configuration Menu Functions... 46 "Video" Menu ... 46 Video port... 10 Video Signal... 49, 54 Video Source...
  • Page 97 : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name Type of Product Model Personal Computers :EPSON AMERICA, INC. :3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 :562-290-5254 :EPSON :Projector...
  • Page 98 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 99 Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON...
  • Page 100 Printed in Japan 402529801 Printed on 100% recycled paper. 02.06-.9A(C05)

This manual is also suitable for:

Emp-730

Table of Contents