Connections - JVC GR-DVM90U Instructions Manual

10
EN
WHEN CONNECTED TO A VCR NOT EQUIPPED WITH A
JLIP JACK
When using a VCR not equipped with a JLIP jack, set your VCR brand using the remote control
unit provided with the video camera, then perform editing using the remote control.
When JLIP Video Capture or CardNavigator
is used:
To PC jack
Video Camera
To AV jack
PC connection cable
Use the plug which has three
yellow rings around the pin.
To JLIP jack
When JLIP Video Producer is used:
S-VIDEO cable
To S OUT jack
Connect this if the video
source unit has an S-Video
input jack.
If your VCR has a SCART
connector, use the cable
adapter.
AUDIO/VIDEO cable
CONNECTIONS (cont.)
To COM port
(RS-232C)
To S-VIDEO
input jack
Use the plug
which has one
black ring
around the pin.
White to
AUDIO L
Red to
AUDIO R
Yellow to
VIDEO
PC
Editing cable
To remote
pause jack
VCR
(Recording deck)
Connect here if the
recording deck doesn't
have a remote pause jack.
T W
Remote control unit