Epson PowerLite 1705C Quick Setup page 2

2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
3
I f your image looks like
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
I f your image looks like
the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
• T o connect to a notebook, see "If connecting
to a notebook" below.
• T o project over a wireless network, see
"If projecting wirelessly" on the back of this sheet.
Y ou must have installed the projector's EasyMP™ software and
configured your projector and computer before you can project
wirelessly. See your User's Guide for instructions.
• T o give a presentation stored on a flash drive, digital camera, or
other USB storage device, see Chapter 5 in your User's Guide.
• T o connect to your notebook using the included USB cable, see
your User's Guide.
If connecting to a notebook...
1
M ake sure you've turned on the projector and adjusted the image
as described in sections 1 and 2.
2
L ocate the computer cable that came with the projector. Connect
one end to the projector's blue Computer (Component Video)
port.
Connect the other end to your notebook's video-out port or
monitor port.
3
P ress the Source Search button on the projector or the remote
control until your computer image is displayed.
or , you've placed the projector off
or , press the
Zoom
or buttons on
Computer cable
Turn over