Connecting With Quick Wireless Connection; Preparing The Usb Key; (Only When The Supplied "Wireless Lan Unit" Is Installed) - Epson PowerLite 1725 Operation Manual

Connecting with Quick Wireless Connection

You can use the supplied Quick Wireless Connection USB key (hereafter "USB key") to project images from a connected Windows computer.
This function is called Quick Wireless Connection. You can quickly project images by connecting the USB key to the computer. Software
requirements are listed in the appendix.

Preparing the USB key

(only when the supplied "Wireless LAN unit" is installed)

To project computer images, start with storing the projector information in the USB key. Then connect the USB key to the computer.
Procedure
Install the wireless LAN
unit.
See "Quick Start Guide" for
how to install.
Connect the power cable
(supplied accessory).
p.97
s
Connect the USB key.
When data is saved, and then a message is displayed
on the projection screen, remove the USB key.
Slide open the A/V
mute slide.
Turn on the projector.
Pee!
Using the Using the
control panel remote control
Reading the access indicators
Saving data
Data saved
Write error
You can also run Quick Wireless Connection in the
q
following network settings.
• The "Wireless LAN unit" is installed and
connected to a wireless LAN access point on the
network.
• The optional "Ethernet unit" is installed and
connected to the network by wired LAN.
7
Orange
Green
Red