Epson PowerLite 410W Quick Setup Manual page 3

4
Connect your video source
Connect the projector to a computer or video source using any of the available
connections shown below.
•
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
The projector connectors from highest to lowest quality are
Computer (Component Video), S-Video, and Video (Composite Video).
•
A VGA computer cable is included. You can purchase optional video
and audio cables through Epson or an electronics store.
•
You can connect up to 4 video devices and use the remote control to
switch between them.
S-Video
cable
(optional)
Y ou can also connect an external monitor to simultaneously watch
NOTE
the display on your computer monitor (when the computer cable is
connected to the Computer1 port). To enhance the sound in your
presentation, you can connect external speakers. To monitor or
control the projector over a network, you can connect a network
cable. See the User's Guide on your CD-ROM for instructions.
RCA video cable
(composite video)
(optional)
L-Audio-R
Audio2 and Audio1 ports
Component
to VGA
video cable
(optional)
ports
Turn over
VGA Computer
cable
(included)