Sharp VL-PD6H Quick Operation Manual

CAMCORDER QUICK OPERATION GUIDE
Please consult the supplied operation manual for further details on these and other functions of your camcorder.

Charging the Battery Pack

1
Connect the power cord to the AC
power socket on the AC adapter/
battery charger, and insert the AC
plug into a power outlet.
• The POWER indicator lights up.
2
Align the ƒ mark on the battery
pack with the ∂ mark on the
charger (Q) and guide the battery
into the groove. Pressing the battery
(W), slide it in the direction of the
arrow (E) until it locks into place.
• The CHARGE indicator lights up.

Attaching and Removing the Battery Pack

Attaching the Battery Pack
1
Make sure that the Power switch is
set to OFF.
2
Place your finger in the indented
section and pull out the viewfinder
horizontally (Q), and then lift it up
(W).
3
Align the mark on the side of the
battery pack with the ß mark on the
camcorder (Q), and slide the battery
pack down completely until it locks
into place (W).

Inserting and Removing a Mini DV Cassette

Inserting a Cassette
1
Supply power to the camcorder, then
slide the cassette compartment door
release and open the cassette
compartment door.
• A confirmation sound is made, and
the cassette holder extends and
opens automatically.
2
Insert the cassette fully with the
window facing outwards, and with
the erasure protect tab facing
upwards.

Inserting and Removing a SmartMedia Card

Inserting a SmartMedia Card
1
Make sure that the Power switch is
set to OFF.
2
Slide the card slot door release in
the direction of the arrow.
• The card slot door is opened.
Web-site: www.sharp.co.uk/support Help Line UK
TINSE0368TAZZ
VL-PD6H/Guide
POWER indicator
To power
outlet
AC power socket
Q
W
E E
CHARGE indicator
Q
W
Power source
connection panel
Q
W
Cassette compartment
door release
Erasure
protect tab
SAVE SAVE
C C E E R R
Card slot door
release
1
3
When the battery is fully charged,
the CHARGE indicator goes off.
Slide the battery pack in the
direction of the arrow (Q) and
remove it (W). Then, remove the AC
plug of the power cord from the
power outlet.
4
Lower the viewfinder (Q), and push
it in completely (W).
Removing the Battery Pack
Perform steps 1 and 2 at left under
Attaching the Battery Pack, then
press the power source PUSH release
button (Q), and slide the battery pack
up and take it out (W).
3
Press the PUSH mark gently until
the cassette holder clicks into place.
• A confirmation sound is made, and
the cassette holder retracts
automatically.
4
Wait for the cassette holder to fully
retract. Close the compartment door
by pressing the centre until it clicks
into place.
Removing a Cassette
Perform step 1 at left under Inserting a
Cassette, then take out the cassette.
3
Insert a SmartMedia card into the
slot with the contact area facing in
and with the chipped corner facing
down, and push it in as far as it will
go.
4
Close the card slot door.
Removing a SmartMedia Card
Perform steps 1 and 2 at left under
Inserting a SmartMedia Card, and
then pull the SmartMedia card straight
out.
Ireland: (01) 676 0648
01.4.24, 1:07 PM
W
Q
Q W
Q
W
Power source
PUSH release
button
PUSH mark
Contact area
Chipped
corner
: 08705 274277