Advertisement
WINDOW / WALL TYPE
ROOM AIR CONDITIONER
INSTALLATION AND OPERATION
MANUAL
This INSTALLATION AND OPERATION MANUAL explains the proper use of your new
Conditioner. Read these instructions carefully before installing or operating your air conditioner. The
INSTALLATION AND OPERATION MANUAL should be kept in a safe place for handy reference.
AF-A077J 2çZ-2
CONTENTS
INSTALLATION INSTRUCTIONS ........ 1
OPERATION INSTRUCTIONS ............. 5
MODES OF OPERATION ..................... 7
CLEANING AND MAINTENANCE ....... 9
BEFORE CALLING FOR SERVlCE ..... 10
1
MODELS
AF-A077J
AF-A097J
AF-A127J
98.1.6, 0:11 PM
PAGE
Sharp Air
Advertisement
Related Manuals for Sharp AF-A077J
Summary of Contents for Sharp AF-A077J
-
Page 1: Table Of Contents
BEFORE CALLING FOR SERVlCE ..10 This INSTALLATION AND OPERATION MANUAL explains the proper use of your new Sharp Air Conditioner. Read these instructions carefully before installing or operating your air conditioner. The INSTALLATION AND OPERATION MANUAL should be kept in a safe place for handy reference. -
Page 2: Parts, Names And Dimensions
PARTS, NAMES AND DIMENSIONS Front panel Grille Air filter (behind the grille) Up/Down air flow adjustment louvres Left/Right air flow adjustment louvres Cabinet Ventilation lever Control panel Stopper screws (on left and right side) Power cord and plug DIMENSIONS MODEL AF-A077J, AF-A097J AF-A127J A (mm) - Page 3 INSTALLATION INSTRUCTIONS LOCATION Install the air conditioner to the opening dimensions shown below. Never place any obstacles around the air inlet and outlet. The air conditioner should be installed with a strong external support to minimize noise and vibration, and for the purpose of safe installation, repair, replacement and secure positioning. Avoid installing the air conditioner where it is exposed to direct sunlight.
- Page 4 INSTALLATION INSTRUCTIONS INSTALLATION WARNING : Turn off and disconnect the unit before installation. Grille Remove the grille (Fig.1) and the air filter (Fig.2) from the front panel. Unscrew the screw fixing the front panel to the chassis. (Fig.2) Fig.1 Keep the screw as it will be used later.
- Page 5 INSTALLATION INSTRUCTIONS Drain tray Attach the provided drain tray to the cabinet using the 2 short gold screws ( also provided ) as shown in Fig. 5. Rubbur cap Remove the rubber cap in the base of Cabinet Fig.7 Fig.6 the unit as depicted in Fig.
-
Page 6: Operation Instructions
Power cord parts code AF-A077J,AF-A097J,AF-A127J QACC-A231JBE0 Replacement should be conducted by a service centre approved by Sharp. WAIT FOR 3 MINUTES BEFORE RESTARTING THE COOLING OPERATION Whenever you turn the air conditioner OFF, wait for at least three (3) minutes before restarting the unit. - Page 7 OPERATION INSTRUCTIONS NOTES ON OPERATION POWER SUPPLY VOLTAGE If the power supplied to the unit is not within plus / minus 10 % of the specified rating, the unit may not function and the fuse may blow. WORKING RANGE When the room temperature drops below 21°C, the indoor coil might be frozen and cooling efficiency will be reduced.
-
Page 8: Modes Of Operation
MODES OF OPERATION HOW TO OPERATE AUTO SWING HIGH COOL HIGH COOL COOLER THERMOSTAT SELECTOR WAIT THREE MINUTES BEFORE RESTARTING Control panel Auto swing switch Thermostat knob Selector knob Ventilation lever SELECTOR KNOB Use to select the desired mode. (COOLING , FAN or OFF) OFF Both the fan and cooling opera- Cooling for sleeping comfort with tion are off. - Page 9 MODES OF OPERATION THERMOSTAT KNOB Use to adjust the desired room temperature setting. The air conditioner will automatically maintain the room temperature according to the THERMOSTAT setting. The higher the numbers, the cooler the room temperature becomes. Experiments may be needed in order to find out the most suitable setting. AUTO SWING SWITCH Use to activate automatic louvre movement during LOW COOL or HIGH COOL.
-
Page 10: Cleaning And Maintenance
CLEANING AND MAINTENANCE WARNING : Turn off and unplug the unit before performing any cleaning or maintenance. CLEANING THE FILTER If the filter is clogged with dust the amount of air flow will be reduced, resulting in poor cooling performance. The filter should be cleaned every 10 days. At the beginning of every cooling season or if the air conditioner has not been used for a long period, clean the filter before starting to operate the unit. -
Page 11: Before Calling For Servlce
BEFORE CALLING FOR SERVlCE IF YOUR AIR CONDITIONER DOES NOT OPERATE PROPERLY, PLEASE CHECK THE FOLLOWING ITEMS BEFORE CALLING FOR SERVICE. AIR CONDITIONER DOES NOT OPERATE AT ALL • Is the power cord loosened or unplugged? • Is the fuse blown or has the circuit breaker been tripped? •... - Page 12 SHARP CORPORATION Osaka, Japan PRINTED IN THAILAND TINS-A479JBR0 TL 7DO 1 AF-A077J 2çZ-2 98.1.6, 0:11 PM...