Off Timer - Sharp 14D2-SS Operation Manual

Timers (continued)

OFF Timer:

Automatically turns to Standby mode after the set length of time has passed.
1 2
4 5
7 8
0
@
CH
CH
FUNCTION TIMER
!,#
SYSTEM NORMAL
TV
• To cancel the Off Timer, press the NORMAL button during the Off Timer mode.
• The minute setting of the timer is in 10-minute units.
• The Off Timer is cancelled if the power is turned off with the STANDBY/ON (ø) button on the remote control or
the POWER switch on the TV set or if the power is otherwise cut off.
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
H Setting the Off Timer
! Press the TIMER button 2
TV/VIDEO
times and the OFF
appears.
3
6
9
@ Press the VOLUME UP ( ) or
DOWN ( ) button to set the
time. (Maximum time that can
be preset is 12 hours and 50
minutes.) In this state, the
PICTURE
Timer starts to count down.
# When you have finished setting
the time, press the TIMER
button 2 times. The on-screen
display disappears.
H Action of the Off Timer
5 minutes before the Off Timer
activates, the remaining time is
displayed on the screen for 3
seconds, and reappears at the
start of every remaining minute.
A flashing display of the remaining
time appears on the screen during
the last five seconds before the Off
Timer activates.
When the preset length of time (in
the above example, 2 hours and 30
minutes) has passed, the TV set
enters Standby mode.
display
Flashing for 5 seconds
(The power turns off)
‰ 14