Table of Contents
Advertisement
Æ Æ Æ Æ Æ Is the transmitting mode configuration correctly set?
• Make sure that the "Peer-to-Peer" or the "Access Point" is set.
Æ Æ Æ Æ Æ Is the channel set correctly?
• When using the "Peer-to-Peer" as the transmission mode, set the same channel for the
Wireless LAN PC Card or the devices you want to communicate with.
Æ Æ Æ Æ Æ Is the SS ID set correctly?
• When using the "Access Point" as the transmitting mode, set the same SS ID for the
Wireless LAN PC Card or the devices you want to communicate with.
Æ Æ Æ Æ Æ When using the Encryption, make sure that the configuration of Encryption is
correct.
• When using the Encryption, set the same Encryption for the Wireless LAN PC Card or
devices you want to communicate with.
Slow Transmit Rate
Æ Æ Æ Æ Æ Is the Configuration Utility icon
• Shorten the distance between your Wireless LAN PC Card and the partner Wireless LAN
PC Card.
• Move any obstacle placed between your Wireless LAN PC Card and the partner Wireless
LAN PC Card.
• Change the configuration of the transmit channel.
Æ Æ Æ Æ Æ Is the Transmit Rate configured correctly?
• Generally select the "Fully Automatic".
Æ Æ Æ Æ Æ Is the Power Save Mode active?
• Under the Power Save Mode, the Transmit Rate is reduced. Deactivate the Power Save
Mode.
Æ Æ Æ Æ Æ Is the Encryption function being used?
• If you use the Encryption function, the Transmit Rate is reduced. Deactivate the
encryption function.
When the Wireless LAN Card does not work
Æ Æ Æ Æ Æ Is the LINK indicator on the Wireless LAN PC Card on?
• On:
• Blinking: Wireless LAN PC driver not operating properly. Reinstall the driver.
• Off:
Æ Æ Æ Æ Æ Is the SS ID name, Channel, and wireless transmission settings the same in
both the projector and computer?
• If not, transmission is not possible.
• When transmitting to the projector, set the wireless transmission mode to "Peer-to-Peer".
Æ Æ Æ Æ Æ Check the projector and computer network settings.
• When
Recheck the IP address, subnet mask and gateway values of both the projector and
computer.
operating properly.
wireless LAN card is not operating. Check if the card is correctly inserted.
"DHCP
Server" setting is set to "OFF".
yellow?
-29
Advertisement
Table of Contents
