Download Print this page

Dell PowerEdge External Media System 1434 Manual page 10

Statement of volatility
Hide thumbs Also See for PowerEdge External Media System 1434:

Advertisement

Item
ONFI Backup Flash
SDRAM
H310, H310M PERCs
NVSRAM
FRU
1-Wire EEPROM
SBR
Flash
PCIe SSD Extension Card
Switch Configuration
EEPROM
IDSDM
SPI Flash
MCU
 
NOTE: For any information that you may need, direct your questions to your Dell Marketing contact.
______________
© 2013 Dell Inc.
Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.
How is this memory write
protected?
Not WP. Not visible to Host
Processor
Not WP. Not visible to Host
Processor
Not WP. Not visible to Host
Processor
Not WP
Not WP. Not visible to Host
Processor
Not WP. Not visible to Host
Processor
Not WP. Not visible to Host
Processor
Device can be write
protected via hardware pin.
Alternatively, device
contents can be write
protected via WPEN bit in
status register.
Hardware strapping
N/A
How is the memory cleared?
Flash can be cleared by powering up the card and
allowing the controller to flush the contents to
VDs. If the VDs are no longer available, cache can
be cleared by going into controller bios and
selecting Discard Preserved Cache.
Cache can be cleared by powering off the card
Cannot be cleared with existing tools available to
the customer
Cannot be cleared with existing tools available to
the customer
Cannot be cleared with existing tools available to
the customer
Cannot be cleared with existing tools available to
the customer
Cannot be cleared with existing tools available to
the customer
System is not functional as intended if
corrupted/removed.
Not user clearable
Not user clearable

Advertisement

loading