Basic Printing - Sharp AR-NB2A Online Manual

3 PRINTING FROM MACINTOSH

Basic printing

To use the machine as a printer for the Macintosh, the PS3 expansion kit (AR-PK1N) must be installed and the machine must be
connected to a network. To install the PPD file and configure the printer driver settings, see the software setup guide.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Start the application and open the document
that you wish to print.
2
Select "Print" from the application's "File"
menu.
3
Make sure that the correct printer is selected.
The Print window varies depending on the operating
Note
system version, the printer driver version, and the
application.
CO NT E N TS I N D E X
4
Configure print settings.
The settings vary depending on the operating system
Note
version, the printer driver version, and the application.
5
Click the "Print" button.
Printing begins.
(part 1)
Click next to "Copies &
Pages" ("General" in Mac OS
9.0 to 9.2.2) and select the
settings that you wish to
configure from the pull-down
menu. The corresponding
setting screen will appear.
21