Scanning Reflective Documents Or Photographs - Epson 1250 Basic Manual

6. Place the TPU on the film holder. Be sure to align the notches on the TPU with
the holes in the film holder.
7. In EPSON TWAIN, select
, or
Film TPU: Pos. Film
settings).
For more information on using the transparency unit, see your electronic Reference
Guide.

Scanning Reflective Documents or Photographs

When you return to scanning normal reflective documents (non-transparent
documents such as memos or photographs), be sure to:
I
Unplug the AC adapter, then unplug the transparency unit from the option
connector. When you are ready to scan again, plug in the AC adapter.
I
EPSON Perfection 1650 PHOTO users only: Replace the reflective document
mat, as shown below.
1. Open the document cover.
2. Hold the reflective document mat with the white side facing away from the
cover.
3. Slide the bottom corners of the reflective document mat
into the slots at the bottom of the document cover.
Make sure the top of the mat is inserted in the slot
at the top of the cover.
TPU: Color Neg. Film
as your image type (see page 18 for recommended
Scanning Reflective Documents or Photographs
,
TPU: Monochrome Neg.
23