Epson Perfection 1240U PHOTO User Manual page 15

9. After the scanner software installation is complete,
the Screen Calibration utility automatically starts.
For the best results from an EPSON ink jet printer,
leave the default setting of 1.8.
If you are using a different printer or your printouts
don't match what you see on screen, you can
change the setting. Move the slider to the right or
left until the shades of the horizontal gray stripes
appear similar. View the screen from a short
distance. The gray stripes will not perfectly blend
together; however, try to make the two tones match
as closely as possible.
10. Click
OK
You will not need to change the screen calibration again as long as you
continue to use the same monitor.
If you don't see the Screen Calibration utility, you can access the utility as
follows: Double-click the Scanners and Cameras icon in the Control Panel.
Click the Properties button. Click the Utility tab, then click the Screen
Calibration utility icon. The Screen Calibration utility appears.
11. Click
Finish
Hardware Wizard.
12. Now you can install the rest of your
software (see page 19) and view your
electronic manuals (see page 23).
10
Setting Up Your Scanner
to register the calibration setting.
to exit the Add New