When you have your IP address, follow the steps below to assign it to your computer.
1. Select
on the list of installed
TCP/IP
network components on the
Configuration tab, and then click the
button. If necessary, click
Properties
the
IP Address
2. Click
Specify an IP address
then enter the IP address and subnet
mask.
If you're using a DHCP server on your network, you can assign an IP
address automatically by selecting Obtain an IP address automatically and
clicking OK.
3. Click
to close the TCP/IP Properties window, then click
OK
the Network window and have your IP address assignment take effect. Make sure
you share the IP address for the scanner server with client computers.
tab.
, and
again to close
OK
Installing the TCP/IP Protocol
139