JVC GZ-MG630 Manual Book page 67

• Sometimes playback is interrupted at the connecting section
between two scenes.This is not a malfunction.
• Select [PLAYBACK MPG FILE] then search the video on the index
screen.
(Video tiles that have damaged management information can be
played back.)
• Cancel group display and date search functions.
• Change
the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA
FOR IMAGE]. (Files on other media are not displayed.)
• The following functions cannot be used for a backup DVD.
When playing back video
- Search index by date
- Playback
effects
When playing back still image
- Playback effects
• If there are many files (such as video) in the camcorder, it takes
time for the camcorder to respond. It is recommended that you
copy all files from the camcorder onto your computer, and erase
the files from the camcorder.
• Check the remaining battery pack charge.
(When the battery pack is fully charged, the lamp does not flash.)
• When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery pack is being recharged outside the permitted
temperature range, recharging may stop to protect the battery
pack.)
• Replace the battery.
o Set [REMOTE] to [ON].
• The remote control may not operate outdoors or in places
exposed to strong light.
• When connecting to the HDMI cable, the image or sound may not
appear on the TV properly depending on the TV connected. In
such cases, perform the following operations.
1) Disconnect the HDMI cable and connect it again.
2) Turn off and on the camcorder again.
• TVs may operate differently depending on the specifications,
even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC
functions of the camcorder cannot be guaranteed to operate in
combination with all the TVs. In such cases, set [HDMI CONTROL]
to [OFF].
E.67