Dell PowerEdge UPS 500T Getting Started Manual page 13

Starting the UPS
Press the button on the UPS rear panel.
12
Completing the Startup
Verify that the Normal icon
13
UPS is operating normally and any loads are powered.
On the UPS status summary screen, press the
14
Resolve any active alarms before continuing. See "Troubleshooting" in the Dell Line-Interactive
Tower UPS 500W, 1000W, and 1920/1500W User's Guide.
If there are no active alarms, a "No Active Alarms" message appears.
To change other factory-set defaults, see "Operation" in the Dell Line-Interactive Tower UPS
15
500W, 1000W, and 1920/1500W User's Guide.
appears on the UPS status summary screen, indicating that the
button to check for active alarms or notices.
Installation and Startup
9
|