318 in. professional electric drill variable speed / reversible double insulated (14 pages)
Summary of Contents for Craftsman 315.271690
Page 1
• Features all Safety Rules and Operating Instructions before first use of • Operation this product. • Maintenance Customer Help Line: 1-800-932-3188 • Parts List Sears, Roebuck Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-718 2-00...
Page 2
TABLE OF CONTENTS • Table Of Contents ............................• General Safety Rules ........................• Specific Safety Rules/Symbols ........................• Features ..............................• Operation ..............................7-10 • Maintenance ..............................• Accessories ..............................• Exploded View And Repair Parts List ......................• Parts Ordering / Service ..........................
Page 3
Tool Use and Care • Check for misalignment or binding of moving parts, breakage of parts, and any other condi- • Use clamps or other practical way to secure tion that may affect the tool's operation. If and support the workpiece to a stable plat- damaged, have the tool serviced before using.
Page 4
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. replaced by an authorized service center. Additional Rules for Safe Operation Following this rule will reduce the risk of electric...
Page 5
SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Watt Power rpin Minutes Time "k., Alternating Current Type or a characteristic of current No Load Speed Rotational speed, at no load Class II Construction Designates Double Insulated Construction tools .../min Revolutions or Reciprocation Per Minute...
Page 6
APPLICATIONS KNOW YOUR ELECTRIC DRILL See Figure 1. (Use only for the purpose listed below) Before attempting to use your drill, familiarize yourself • Drilling in wood. with all operating features and safety requirements. • Drilling in ceramics, plastics, fiberglass, and Your drill has many features for making drilling laminates.
Page 7
RELEASE CHUCKBODY WARNING: If any parts are missing, do not DRILLBIT (UNLOCK) operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating CHUCK your drill.
Page 8
VARIABLE SPEED TO INSTALL BITS See Figure 5, See Figure 6. DRILLBIT CHUCKJAWS CHUCKBODY CHUCKCOLLAR TO INCREASE SPEED, RIGHT I Fig. 6 PULLSWITCH TRIGGER • Unplug your drill. WARNING: Failure to unplug your drill could result in accidental starting causing serious injury.
TO REMOVE BITS • Depress and release switch trigger to be sure your drill is in OFF position before connecting it to • Unplug your drill power supply. • Check the direction of rotation lever for correct WARNING: Failure to unplug your drill could result in accidental starting causing setting (forward or reverse).
Page 10
TOPVIEW • Open the chuck jaws and remove hex key wrench. Remove the chuck screw by turning it in a clockwise direction, See Figure 1 I. SCREWDRIVER Fig. 11 Note: The chuck screw has Fefthand threads. • Insert hex key wrench into chuck and tighten chuck jaws securely.
DOUBLEINSULATION GENERAL All parts represent an important part of the double Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual insulation system and should be serviced only by a three-wire grounded power cord. All exposed metal qualified Sears service technician.
TALADRO ELECTRICO PROFESIONAL CRAFTSMAN DE 3/8 pulg. MODELO N_ 315.271690 el n0mero de modelo en toda la correspondencia respecto a su TALADRO ELECTRICO o cuando El n0mero de modelo se encuentra en una placa situada en la caja del motor. Siempre mencione haga pedidos de repuestos.