Page 1
* Esta limpiadora a presiOnest_ clasificada conforme a la norma PWl01 (comprobaciOn y clasificaciOn de rendimiento de limpiadoras a presiOn) de la AsociaciOn de fabricantes de bombas a presiOn(Pressure Washer Manufacturers Association, PWMA). Sears, Roebuck and Co., HoffmanEstates,IL 60179 U.S.A. Visit our Craftsman website: www.craftsrnan.corn Part No. 208718GS Draft B (11/04/2009)
Page 2
CRAFTSMANLiMiTED WARRANTY If this Craftsman product fails due to a defect in material or workmanship within two years from the date of purchase, return it to any Sears store, Sears Parts & RepairService Center, or other Craftsman outlet in the United Statesfor free repair (or replacement if repair proves impossible).
Page 3
Read this manual carefully and becomefamiliar A. WARNING The engine exhaust from this product with your pressurewasher. Knowits applications, contains chemicals known to the State of California to its limitations, and any hazards involved. cause cancer, birth defects, or other reproductive harm. important Safety I.formation A.
Page 4
A. WARNING Starter cord kickback (rapid retraction) can A. WARNING Fuel and its vapors are extremely flammable and explosive. result in bodily injury. Kickback will pull hand and ,_arm toward engine faster than you can let go. Fire or explosion can cause severe burns or death.
Page 5
A, WARNING Risk of eye injury. _i, WARNING Use of pressure washer can create Spray can splash back or propel objects. Kickback from spray gun can cause you puddles and slippery surfaces. to fall. • Always wear indirect vented (chemical splash) safety goggles •...
KNOWYOURPRESSURE W ASHER Read the Operator's Manual and safety rules before operating your pressurewasher. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. A - Spray Gun-- Controls the application of water onto cleaning N - Recoil Starter -- Used for starting the engine manually.
6. if any parts are missing or damaged, call the pressure washer helpline at 1-800-222-3136. ASSEMBLING PRESSURE WASHER Your Craftsman pressure washer will need assembly before operation: Fill out and send in registration card. insert multi-colored quick connect nozzles and other Attach handle and accessory tray.
Page 8
Align hose wrap (A) to the back side of accessory tray. 2-1N-1SoapSystem Locate notch with "unlock" icon (B) on hose wrap. The pressure washer is equipped with two detergent Position notch at top with hose wrap in vertical position. siphoning hoses. Clips in the back of accessory tray should slide into the Project Pro PerfectMix Siphon...
AddEngineOil Use clean, fresh, regular unleaded fuel with a minimum of 86 octane with equipment. DO NOT mix oil with fuel. Place pressure washer on a flat, level surface. Place pressure washer on a level surface. Cleanarea Cleanarea around oil fill and remove yellow oil fill around fuel fill cap, remove cap.
Run water through garden hose for 30 seconds to flush Connect Hose and Water Supply to Pump it of debris. Turn off water. NOTICE DO NOTsiphon standing water for the water NOTICE DO NOT run the pump without the water supply supply.
HOWTOUSEYOURPRESSURE W ASHER To Start YourPressureWasher To start your engine-powered pressure washer for the first If you have any problems operating your pressure washer, time, follow these instructions step-by-step. This information please call the pressure washer helpline at 1-800-222-3136. also applies whenever you start the engine after you have let PressureWasher Location the pressure washer sit idle for at least a day.
Page 12
9. Pull c hoke r od(A)to"Closed" position. A. WARNING Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will puff hand and _,__ arm toward engine faster than you can let go. Broken bones, fractures, bruises, or sprains could result.
Page 13
How to Stop Your Pressure Washer How to Use PrecisionSpray Nozzle System Releasespray gun trigger and let engine idle for two The quick-connect on the nozzJe extension aJJows you to minutes. switch between five different PrecisionSpray system nozzles. PrecisionSpray nozzlescan be changed while Move engine stop switch to "Off"...
Page 14
Select magenta jetsoap PrecisionSpray nozzle to NOTICE Contact with the hot muffler can damage detergent launch soap to second story siding and windows. siphoning tube. • When inserting the siphon into a detergent solution bottle, route JET SOAP the tube so as to keep it from inadvertently contacting the hot muffler.
NOTICE Detergent cannot be applied with the high pressure Cleanin9 Detergent Siphonin9 Tube nozzles (Cyan, Orange or Red). If you used the clear detergent siphoning tube, you must Make sure garden hose is connected to water inlet. flush it with clean water before stopping the engine, Checkthat high pressure hose is connected to spray gun Placedetergent siphoning tube/filter in a bucket full of and pump.
Pressure Washer Specifications Max Outlet Pressure ...... 3,000 PSI* Max Flow Rate......2.7 GPM Detergent Mix ......Use as directed Water Supply Temperature ..Not to exceed IO0°F Engine Specifications Bore ....... 2.7 in. (69 mm) Stroke ......2.0 in. (50 ram) Displacement ....
OWHER'SRESPOHSIBILITIES GeneralBecommendaUons Regular maintenancewill improve the performance and Follow the hourly or calendar inteHals,whichever occurs extend the life of the pressure washer. See any Sears or first. More frequent service is required when operating in adverse conditions noted below. other qualified service dealer for service. The pressure washer warranty does not cover items that have been subjected to operator abuse or negligence.
PRESSURE WASHER MAINTENANCE A WAFtNIN(_ The high pressure stream of water that this equipment produces can cut through skin CleanDebris and its underlying tissues, leading to serious Daily or before use, clean accumulated debris from pressure injury and possible amputation. washer.
ENGINEMAINTENANCE Add EngineOil Place pressure washer on a fiat, level surface. A WARNING Unintentional sparking can result in fire or Cleanarea around oil fill and remove oil fill cap/dipstick. electric shock. Checkoil level as described in Checking OilLeveL WHEN ADJUSTING ORMAKING REPAIRS TOYOUR PRESSURE If needed,slowly pour oil into oil fiii opening.
ServiceAir Cleaner Checkelectrode gap with wire feeler gauge and set gap at 0.028-0.031 inches 0.70-0.80 mm), if necessary. Your engine will not run properly and may be damaged if you run it with a dirty air cleaner. Service more often if operating under dirty or dusty conditions.
AFTEREACHUSE Cleanand inspect the spark arrester as foflows: Remove the three 6 mm bolts (A) from the muffler Water should not remain in the unit for long periods of time. protector (B), and remove the muffler protector. Sediments or minerals can deposit on pump parts and "freeze"...
WIHTER STORAGE DrainingFuel Tank and Carburetor: if fuel additive is not used, remove all fuel from tank and carburetor. NOTICE You must protect your unit from freezing Place an approved fuel container below carburetor and temperatures. use a funnel to avoid spilling fuel. •...
Protect Pump Other Storage Tips DO NOTstore fuel from one season to another unless it To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver,item 7174403, to treat has been treated as described in Protect Fuel System. pump.
Page 24
Problem Correction Cause Low pressure nozzle installed. Replace nozzle with high pressure nozzle. Water inlet is blocked. Clear inlet. inadequatewater supply, Provide adequatewater flow. inlet hose is kinked or leaking, Straighten inlet hose, patch leak. Pump has following problems:failure Checkand clean inlet hose strainer. Clogged inlet hose strainer.
Page 25
CRAFTSMAH3800 PSi Pressure Washer 580.752630 Main Unit m Exploded View and Parts List \\\\ 9 @ @ i¸ /, item Part# Item Part # Description Description 205961GS BASE 192310GS MOUNT-VIBRATION B204257GS HANDLE 900 NSP ENGINE(GCV190LAN5AF) 209260GS BILLBOARD (see pages 26-28) B1797GS CLiP 205291GS...
Page 28
ENGINE, Honda, GCV198LAN5AF- Parts List item Part# item Part # Description Description 17701-ZOL-810 06180-ZOJ-O00 ARRESTERKIT, SPARK TUBE, FUELTANK 17702-ZM0-800 11300-ZOL-821 PAN ASSY., OIL (SAE) TUBE, FUEL 12000-ZOY-010 CYLINDERASSY 18310-ZOY-O00 MUFFLER 18321-ZOL-O00 12209-ZM0-003 SEAL, VALVESTEM PROTECTOR, M UFFLER 18350-ZL8-000 12310-ZOJ-O00 COVER,CYLINDERHEAD ARRESTER,SPARK 18356-ZL8-000 12311-ZL8-000...
Page 30
California, U.S. EPA,and Sears Emissions Sears EmissionsControl Warranty Provisions ControlWarranty Statement The following are specific provisions relative to your Emissions Control Warranty Coverage. it is in addition to the YourWarranty RightsAnd Obligations Searsengine warranty for non-regulated engines found in the Operator's Manual. The California Air Resources Board, U.S.
Page 31
The warranty onemissions-related parts isasfollows: LookFor ReJevantEmissionsDurability Period and Air Index Information On Your Engine EmissionsLabeJ • Any warranted part that is not scheduled for replacementas required maintenancein the owner's Enginesthat are certified to meet the California Air Resources manual supplied, is warranted for the warranty period Board (CARB) Emissions Standard must display information stated above.
Page 32
GARANT|ALJMiTADA DE CRAFTSMAN Si este producto de Craftsman falla debido a defectos de materiales o mane de obra en el plazo de dos a_os a partir de la fecha de compra, devu_lvalo a cualquier aimac_n Sears, centre de reparaci6n y repuestos Sears, u otro punto de venta de Craftsman de los Estados Unidos para su reparaci6n gratuita o, en case de que _sta no sea posible, para su sustituci6n.
_lL ADVERTENCIA El escape del motor de este producto Leaestemanualminuciosamente y conozca a fondo las partes y el funcionamiento desum_quina limpiadoraa contiene eiementos quimicos reconocidos en el Estado de presi6n.Conozca susaplicaciones, suslirnitacionesy los California por producir c_.ncer,defectos de nacimiento u peligros involucrados.
Page 34
A AI:IVERTENCIALa gasolina y sus vapores son A ADVERTENCIA El retroceso (repliegue r_.pido) del extremadamenteinfiamables y cable del arrancador puede producir lesiones. El explosivos. retroceso impedir_, que el usuario suelte ei cable a El fuego o una explosi6n pueden causar tiempo y tirar_ de su mano y brazo hacia el motor.
Page 35
AVISO El rociado de alta presi6n puede da_ar elementos A. ABVERTENCIA El chorro de agua a alta presi6n que fr_.giles, incluyendo ei vidrio. * NO dirija la pistola rociadora hacia un cristai cuando utiNcela los tejidos subcut_.neos, provocando iesiones de este equipo produce, puede atravesar ia piei y boquiNaMAX (punta de aifiler).
Page 36
COHOZCA SU MAQUIHALIMPIADORAA PRESIOH Lea el ManuaJ del 0perario y JasregJasde seguridadantes de poner en marcha su JJmpiadora a presi6n. Compare las ilustraciones con su limpiadora a presi6n para familiarizarse con las ubicaciones de los diferentes controles y ajustes. Guarde este manual para referencias futuras. A - Pistola de Rociado-- Controlalaaplicaci6nde aguasobre la P- Tanquedel Combustible-- Lleneeltanquecon gasolinaregularsin superficiede limpiezacon el gatillo.
Su limpiadora apresi6n requiere decierto e nsamble yestar_ lista Conecte manguera a alta presi6n a pistola rociadoray a bomba. para s er usado _nicamente despu_s dehaber depositado Conecte el suministro de agua a bomba. combustible yelaceite recomendado. Conecte boquilla la extensi6n al pistola rociadora. Sitiene problemas c onel ensambiedesum_quina limpiadoraa Selecto/conecta r_pido conecta boquilla a la extensi6n de la...
Page 38
Alinee la o las abrazaderasde la manguera (A) con la parte Sistemade inyecci6n"2 en 1" trasera de la bandejade accesofios. Alinee las muescas y La limpiadoraa presi6n est_ equipada con dos mangueras de coloque la abrazaderade la manguera sobre el soporte de la inyecci6n de detergente.
Page 39
Utilice gasolina normal sin plomo, limpia y nueva con un Agregue Aceite de Motor minimo de 86 octanos. NO mezcleaceite con combustible. Coioque la limpiadoraa presi6n en una superficie plana y nivelada. Limpie el _rea alrededor de la tapa de llenadodel combustible, retire latapa.
Haga correr el agua a trav_s de la manguera de su jardin por Conectela Manguera y el Suministrode Aguaa la Bomba 30 segundos para fimpiar cualquier escombro que se encuentre en ella. Desconecteel agua. AVISO Hace NO agua de parar de siphon para el abastecimiento de AVISO NO haga funcionar la bomba si no tiene el agua.
COMOUSAR SULIMPIADORA A PRESI6H Para porter en marcha el limpiadora a presi6n Para darJearranque a su iimpiadora a presi6n movido a motor por Si tiene problemas con el funcionamiento de su m_quina limpiadora primera vez, siga estas instrucciones paso a paso. Esta informaci6n a presi6n, por favor liame a la linea de ayuda de la m_quina acerca de la puesta en marcha inicial tambi_n es v_lida para cuando limpiadora a presi6n al 1-800-222-3136,...
Page 42
9. Tire de lavarilladel estrangulador ( A) hastala posici6n _i, ADVERTENCIA El retroceso (repliegue r_.pido) del "Cerrade"("Closed"). puede producir cable del arrancador lesiones. El retroceso impedir_, que el usuario suelte el cable a tiempo y tirar_, de su mane y braze hacia el motor. Come resultado, podrian producirse fracturas, contusiones o esguinces.
Page 43
A, ADVERTENCIA El contacto con la zona dei silenciador puede producir quemaduras graves. _,_,,,_,_,__ Los gases y ei calor de escape pueden inflamar los matefiales combustibles y las estructuras 0 da_ar el dep6sito de combustible y provocar un incendio. • NO toque ias superficies calientes y evite losgases dei escapea alta temperatura.
Page 44
Seleccione la boquilla roja PrecisionSpray para limpieza NO coloque la boquilla a menos de 15 cm (6 pulgadas) cuando de m_xima intensidad. Es id6nea para eliminar manchas est_ limpiando Ilantas. rebeldes de grasa, alquitr_n, cera, etc. Sistemade inyecci6n "2 en 1" A, AOVERTENCIA Peligro de quemadura quimica.
Page 45
Mantenga la pistola de rociado a una distancia segura del _rea Limpieza y aplicaci6n de detergente con el sistema de inyecci6n que planea rociar. est_ndartransparente Siga estos pasos para aplicar detergente _lL ADVERTENCIA El retroceso de la pistola rociadora diluido con el tubo de inyecci6n est_ndar transparente: puede provocar caidas.
ESPECJFJCACJOHES DELPRODUCTO Especificacionesde Jam_quina Jimpiadora a pros|on Presi6n de salida m_ima ......3,000 PSI* Caudalm_imo ........2.7 GPM Mezcla de quimicos ....Use seg_n instrucciones Temperatura del suministro de agua ......Que no exceda los 100°F Especificacionesdel motor Di_metro de camisa ....69 mm (2,7 pulgadas) Carrera ......
RECOMENDACIONES G ENERALES Recomendaciones enerales El mantenimiento peri6dico mejorar_ el rendimiento y prolongar_ la Plan de mantenimiento vida Otii dei limpiadora a presi6n. Si necesita asistencia, consulte con un distribuidor de Sears o con otro distribuidor cualificado. Siga los intervaios de horas o de calendario, los que sucedan antes.
Page 48
MANTEHJMIENT8DE LA MAQUJNA SIEMPRE que pare el motor, apunte con la pistola rociadora hacia una direcci6n segura, presione el seguro (bot6n rojo) y LJMPJADORA A PRESJ6N apriete el gatillo para descargar la presi6n y evitar el retroceso. A. ABVERTENCIA El chorro de agua a alta presi6n que Limpie los residues Limpie a diafio, o antes de cada use, los residues acumulados en el los tejidos subcut_.neos,provocando iesiones de...
Page 49
Adici6n de aceite del motor MANTENliVilENTODELMOTOR Coloque el limpiadora a presi6n sobre una superficie nivelada. A ABVERTENCIA Chispear involuntario puede tener Limpie la zona de alrededor del tap6n de Ilenado de aceite y "_d=. como resultado el fuego o el golpe quite ia varilla de nivel de aceite.
Page 50
Revise la separaci6n del ebctrodo con un calibrador de Serviciodel Depuradorde Aire alambre y ajuste la separaci6n a 0.028-0.031 pulgadas (0.70- Su motor no funcionar_ adecuadamentey puede da_arse si usted Io 0.80 mm), si es necesario. hacefuncionar con un depurador de aire sucio. Suministre servicio m_s frecuentemente si la unidad funciona bajo condiciones de mucha suciedad o pobo.
Limpie e inspecciene el apagachispasde la siouiente manera: A ABVERTENCIA El chorro de agua a alta presi6n que Quite lostres pernos de 6 mm (A) del protector del silenciador este equipo produce, puede atravesar ia piei y (B) y retire el protector. los tejidos subcut_.neos, provocando iesiones de gravedad que podrian dar lugar a la amputaci6n de un miembro.
Cambiode aceite Proteja el Sistemade CombusUble Con el motor todavia caiiente, drene el aceite de la caja dei cig_Je_ai. AdiUvo para Combustible: Vuelva a Ilenarlocon ei grado de aceite recomendado. Vea Cambio Siva a usar aditivo para combustible, Ilene eltanque de de Aceite del Motor en la secci6n Mantenimiento del Motor.
Page 53
ProbJema Soluci_n CaUS3 Est_ usando JaboquJJJa d e baja presi6n Gamble la boquilla a una de las tres boquillas de (neora). alta presi6n. La entrada de agua est_ bloqueada, Limpie la entrada. Suministro de agua inadecuado. Proporcione fiujo de agua adecuado. La manguera de entrada estA doblada o Estire la manguera de entrada, coloque un presenta fugas.
Page 54
Garantiade controlde ernisionesde California, Disposicionesde la garantia contradefectos deJ sistema de control de emisiones de Sears U.S. EPAy Sears A continuaci6n se detaiian las disposiciones concretas Berechosy obliga¢iones de la garantia reiativas a la Cobertura de ia garantia contra defectos dei sistema de control de emisiones.
Page 55
Lagaranfia deloscomponentes relacionados conlas Sears.Sears no ser_.responsable de la cobertura de la emisiones eslasiguiente: garantia de fallos de componentes relacionados con el sistema de emisiones cubiertos por ia garanfia • Los failos de todo componente cubierto por ia garanfia provocados por el uso de componentes que no se deba sustituir como parte dei plan de complementarios o modificados.
Page 56
Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter made it, no matter who sold For the replacement parts, accessories owner's manuals that you need to do-it-yourself.