Advertisement
CARTON
CONTENTS
1. Boom Mount Bracket
2. Lid
3. Tank with Frame Tubes
4. Spray Gun Assembly
5.
Boom Assembly
6.
Hitch Arms (2)
7, Hitch Brackets (2)
8. Axle
9. Wheels (2)
8
REMOVAL
OF PARTS FROM CARTON
,
Remove all parts and hardware packages from the
carton, Lay out a!J parts and hardware and identify
using the illustrations on pages 3 and 4.
TOOLS
REQURED
FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
Assemble the axle through the large holes in the
frame tubes. Jf the axle will not fit, slightly loosen the
bolts in the frame tubes to align the holes. Retighten
the bolts after assembling axle. See figure 1.
Assemble
a spacer, a 1/2" flat washer, a wheel and
another 1/2" fiat washer onto the axle. Lightly tap a
palnut onto the end of the axle. Repeat on other end
of axle. See figure 1.
1/2" FLAT
_
I 1
WASHER
I
I
\
PALNUT
SPACER
AXLE
FIGURE 1
Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts and
5/16" nylock nuts as shown in figure 2. Do not tighten
yet. Repeat for other side.
HEX BOLT
HITCH ARM
FIGURE 2
4
Advertisement
