Advertisement
,_
WARNmNG:
Battery tooHsare aHways in operating
condition, Therefore, switch shouHd aHways be Hocked
when not in use or carrying at your side,
SWITCH
See Figure 2,
To turn the tooH ON, depress the switch trigger, To turn it
OFF, reHease the switch trigger,
SWmTCH LOCK
See Figure 2,
The switch trigger can be Hocked in the OFF (center)
position. This feature can be used to prevent the
possibility of accidental starting when not in use. To Hock
switch trigger, pHace the direction of rotation seHector in
center posifion.
REVERSE
\
\
FORWARD
VARIABLE SPEED
SWITCHTRIGGER
Fig, 2
REVERSmBLE
See Figure 2,
This tooHhas the feature of being reversibHe, The direction
of rotation is controHHedby a seHector Hocated above the
switch trigger, With the tooHheHdin normaH operating
position, the direction of rotation seHector shouHd be
positioned to the Heftof the switch for tightening, The
direction is reversed when the selector is to the right of
the switch, When the seHector is in center position, the
switch trigger is Hocked,
VARmABLE
SPEED
See Figure 2,
This tooHhas a variabHe speed switch that deHivers higher
speed and torque with increased trigger pressure, Speed
is controHHedby the amount of switch trigger depression,
CAUTmON: To prevent gear damage, aHways aHHow
coupHer to come to a compHete stop before changing the
direction of rotation,
To stop, reHease switch trigger and aHHow the coupHer to come
to a compHete stop,
TO mNSTALL BATTERY
PACK
See Figure 3,
m
Lock switch trigger on the tooH by pHacing the direction
of rotation seHector in center position,See
Figure 2,
m
PHace battery pack in the tool AHign raised rib inside
tooHwith groove on battery pack,See Figure 3,
m
Make sure the Hatches on each side of your battery
pack snap into pHace and battery pack is secured in
tooHbefore beginning operation,
CAUTION:
When pHacing battery pack in the tool be
sure raised rib inside tooHaHigns with groove on battery
pack and Hatches snap in pHace properHy, Improper
assembHy of battery pack can cause damage to internaH
BATTERYPACK
\\
\
DEPRESSLATCHESTO
RELEASEBATTERYPACK
Fig, 3
TO REMOVE
BATTERY
PACK
m
Lock switch trigger on the tooH by pHacing the direction
of rotation seHector in center position, See Figure 2,
m
Locate Hatches on end of battery pack and depress to
reHease battery pack from the tool See Figure 3,
m
Remove battery pack from the tool
10
Advertisement
