OPERATING INSTRUCTIONS
WASH/RINSE
TEMPERATURE
WARM
HOT
COLD
COLD
COLD
•
COLD
LOAD SIZE (WATER LEVEL)
MEDIUM
SMALL
e
SUPER
RESET
SOAK/
PREWASH
PREWASH
SOAK
FINAL SPIN
RINSE
KNITS/
DELICATES
6
15
12
8
4
I
WHITES
POWER SPIN
)®12
8
_4
PERM PRESS PREWASH
COLORS
Before Operating
Your
Washer
Read your Washer Owner's Guide. It hasimportant
safety and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your Washer Owner's
Guide before operating this appliance.
Operating
Steps
Read Washing Procedures #}your Owner's Guide.
It explains these operating steps in detail.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil
4. Add the measured amount
of detergent
to
wash tub before adding the laundry
load.
Printed in U.S.A.
5. If desired,
add liquid
bleach
to bleach
dispenser. DO NO Tpour bleach directly on to
the load,
6. If desired, add fiquid fabric softenerto
fabric
softener
dispenser.
DO NOT pour fabric
softener
directly onto wash load.
7. Add laundry
load loosely to wash tub. Dry
Ioad should not be higher than top of agitator
vanes. For best results, DO NOT overload.
8. Select the wash cycle and settings according
to type, size and soil level of each load.
.
Close lid and puff out Cycle Selector knob to
startwasher.
The washer will not fill with water,
agitate or spin when the lid is open, and will only
start to do so if the lid is closed.
To stop the washer, push in the Cycle Selector
knob. To change a cycle, push in the Cycle
Selector knob and turn it clockwise
to the
desired setting. Pull out the knob to restart the
washer.
10. Remove items a t end of cycle. Wa it a bout 2-3
minutes for safety lid lock to release.
Cycle Selection
Push in and turn the Cyde Selector knob
clockwise
to the desired cycle. For best
results, follow
the washing instructions
on
the fabric care labels
The Whites, Colors and Knits/Delicates cycles
progress through wash agitation, drain and spin
with a spray rinse, rinse agitation, and a final
spin.
Whites Cycle
This cycle provides up to 1 5 minutes of normal
agitation and a fast spin for most fabrics.
PowerSpin provides12 minutesof spinfor maximum
removal of water. This conserves energy by reducing
drying time.
Colors Cyde
This cycle provides up to 12 minutes of normal
agitation and a fast spin for cottons and blends
with a no-iron finish. A cool down spray rinse
helps reduce wrinkling.
Select the Perm Press Prewash setting to help
loosen soil and remove stains before washing. Add
recommended amount of detergent and other laundry
products desired to tub.
Add load. Select a cold
water rinse and appropriate load size. Load will
agitate 4 minutes, drain and spin. Follow Perm Press
Prewash with a complete
Colors cycle and a half
dose of detergent.
P/N 137122900 (080%