Download Print this page

Craftsman 486.24533 Owner's Manual page 10

25 gallon 70 psi sprayer

Advertisement

CUSTOMER
RESPONSIBILITIES
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
MAINTENANCE
SCHEDULE
_,_
_o_=_o_ e
Fill in dates as you
_e
_,
e _e
Check for loose fasteners
X
Flush the tank
X
Cleaninq the strainers
X
Lubdcetion
X
Service Dates
CHECK
FOR LOOSE
FASTENERS
Before each use make a thorough
visual check of
the sprayer for any bolts and nuts which may have
loosened.
Retighten
any loose bolts and nuts.
FLUSH
THE TANK
Remove any solution lefl in tank. Fill the sprayer part
way with water, start the sprayer and allow clear
water to be pumped through the plumbing system and
out through the boom assembly and the handgun.
Use the handgun to thoroughly wash all internal parts
of the tank, the outside of the tank and the boom.
Refill the tank about half full with plain water and a
chemical neutralizer and repeat the cleaning instruc-
tions above. Flush the entire sprayer with the neutral-
izing agent. Follow the chemical manufacturers
instructions for disposal of ell wash or rinsing water.
CLEANING
THE STRAINERS
At least once a season, clean the strainer in the end
of the intake hose at the bottom of the tank. Remove
the nylon swivel nut from the hose, pull out the screen
end flush it with clear water.
At least once a season, clean the strainers in the
boom nozzles. Remove the nozzle, pull out the
screen and flush it with clear water.
LUBRICATION
App{y a few drops of oil to the whee{ hubs at least
once a year.
STORAGE
RECOMMENDATIONS
Drain all water out of the sprayer, paying special
attention to the pump and handgun. These items are
especially prone to damage from chemicals and
freezing weather.
The sprayer should be winterized before storage by
pumping a 50-50 solution of water and R. V. anti-
freeze through the entire plumbing. Proper care and
maintenance will prolong the life of the sprayer.
IMPORTANT:
Do not allow chemicals to sit in pump
for extended times of idleness. Some chemicals will
damage the pump valve if allowed to soak untreated for a
length of time. Always flush the pump with water after
each use. Follow the procedures in the Maintenance
section for flushing and disposal.
10

Advertisement

loading