Setting The Clock And Minute Timer - Frigidaire FEF388CJSB Owner's Manual

Setting the Clock and
Minute Timer
Note: The minute timer does not start
or stop cooking and is not active during
self-clean. It serves as an extra timer in
the kitchen that will beep when the set
time has run out. The minute timer can
be used independently during any of
the bake or broil functions. The timer
can be set for any amount of time from
5 seconds to 9 hours and 55 minutes.
For a silent control panel:
When choosing a function, a beep will
be heard each time a button is pushed.
If desired, the controls can be
programmed for silent operation. Push
and hold _. After 7 seconds, the
control will beep once. This will block
the controls from sounding when a
button is pushed. To return the sound,
push and hold_ again for 7 seconds
until 1 beep is heard.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has
been interrupted, the display will flash.
1. Push _. The word "TIME" will appear in the display.
2. Push and hold_'_ or_ until the correct time of day appears in the
display. The word "TIME" will disappear after 6 seconds and the clock will
start. Or, you may push_ and the word "TIME" will disappear and the
clock will start.
To Set the Minute Timer
1. Push in _. ":00" and the word "TIMER" will glow in the display.
2. Push and hold_-_ until the desired time appears in the display. As soon
as_ is released, the time will begin to count down in the display. The
word "TIMER" will continue to glow.
3. When the set time has run out, the timer will beep 3 times. It will then
continue to beep once every 10 seconds for 5 minutes (or until_ is
pushed).
When setting the minute timer for: The time will appear in the
display and increase in:
5 seconds to 2 minutes 5 second increments
2 minutes to 10 minutes 10 second increments
10 minutes to 1 hour 1 minute increments
1 hour to 9 hours and 55 minutes 5 minute increments
To Change the Minute Timer while it is in use:
Push and hold_ or_ to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Push and hold_ until ":00" appears in the display. Or you may cancel the
minute timer by pushing _.
10