For Recycling - Craftsman 315.113082 Operator's Manual

5-1/2 in., 14.4 volt cordless trim saw
Table of Contents

Advertisement

_
WARNING:
When servicing, use only identical
Do not abuse power tools. Abusive practices can
Craftsman replacement
parts. Use of any other
damage tool as well as workpiece.
part may create a hazard or cause product
Only the parts shown on parts list, page 19, are
damage,
intended to be repaired or replaced by the customer.
Avoid using solvents when cleaning plastic parts.
All other parts should be replaced at a Sears Service
Most plastics are susceptible to damage from various
Center.
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
_
WARNING:
Do not attempt to modify this tool or
grease, etc.
create accessories not recommended
for use
with this tool. Any such alteration or modification
,_
WARNING:
Do not at any time let brake fluids,
is misuse and could result in a hazardous
gasoline, petroleum-based
products, penetrating
condition leading to possible serious personal
oils, etc. come in contact with plastic parts. They
injury.
contain chemicals that can damage, weaken or
destroy plastic.
BATTERIES
Your saw's battery pack is equipped with 12 nickel-
cadmium rechargeable batteries. Length of service
from each charging will depend on the type of work
you are doing.
The batteries in this tool have been designed to
provide maximum trouble free life. However, like all
batteries, they will eventually wear out. Do not
disassemble battery pack and attempt to replace the
batteries. Handling of these batteries, especially when
wearing rings and jewelry, could result in a serious
burn.
To obtain the longest possible battery life, we suggest
the following:
Store and charge your batteries in a cool area.
Temperatures
above normal room temperature
wilt shorten battery life.
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
All batteries gradually lose their charge. The
higher the temperature the quicker they lose their
charge. If you store your tool for long periods of
time without using it, recharge the batteries every
month or two. This practice wilt prolong battery.
To preserve natural resources,
please recycle or dispose of
batteries properly.
This product contains nickel-
cadmium battery. Must be disposed
of properly. Local, state, or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BATTERY
PACK
REMOVAL
AND
PREPARATION
FOR RECYCLING
_k
WARNING:
Upon removal, cover the battery
pack's terminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble
battery
pack or remove any of its components.
Nickel-
cadmium batteries must be recycled or disposed
of properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result in fire
and/or serious injury.
The following recommended
accessories are currently available at Sears Retail Stores.
5-1/2 in.
Thin Kerf Blade
,_,
WARNING:
The use of attachments or accessories not listed might be hazardous.
18

Advertisement

Table of Contents
loading

Table of Contents