14.5 hp electric start 42" mower 6 speed transaxle lawn tractor (60 pages)
Summary of Contents for Craftsman 917.270921
Page 1
C all: Read and follow all Safety Rules 1-800-659-5917 and instructionsbefore operat- Sears Craftsman Help Line ing this equipment. 5 am - 5 pm, Mon - Sat Seam, Roebuck and Co., Hoffman Estates, II 60179 Visit our Craftsman website:www.sears.com/craftsman...
Page 2
Sears will replace the battery at no charge. In-home warranty service on your Craftsman dding equipment is available at no charge for 30 days from the date of purchase.
• Slow down beforetuming. blades and proceed slowly straight down the slope. • Neverleave a runningmachine DO NOT: unattended. A lwaystum off blades,set parkingbrake,stop engine,and Do not tum on slopes unless neces- removekeys before dismounting. sary, and then, tum slowly and •Tum off blades when not mowing.
Page 4
• Never make adjustments or repairs • Keep nuts and bolts, especially blade with the engine running. attachment bolts, tight and keep • Grass catcher components are subject equipment in good condition. to wear, damage, and detedoration, • Never tamper with safety devices. which could expose moving parts or al- Check their proper operation regu- low objects to be thrown.
Federal laws apply on federal lands. spark arrester for the muffler is available CONGRATULATIONS on your purchase through your nearest Sears Authorized of a Craftsman Tractor. It has been Service CentedDepartment (See designed, engineered and manufactured REPAIR PARTS section of this manual).
Page 6
Seat (1) Shoulder Bolt 5/16-18 (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Knob Video Cassette Keys Slope Sheet (2) Keys "-t...
Page 7
Your new tractor has been assembled at the factory with exception of those parts left unassambled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
HOW TO SET UP YOUR TRACTOR NOTE: You may now roll or drive you tractor off the skid. Follow the appropriate CHECK BATTERY instruction below to remove the tractor • Lift hood to raised position, from the skid. • If this battery is put into service after TO ROLLTRACTOR OFF SKID (See month and year indicated on label...
Page 9
INSTALL MULCHER PLATE • Slowly move the motion control lever forward and slowly drive tractor off (If previously removed) skid. • Raise and hold deflector shield in • Apply brake to stop tractor, set parking updght position. brake and place motion control lever •...
WHILE LEARNING HOW TO USE YOUR V' CHECKLIST TRACTOR, PAY EXTRAATTENTION BEFORE YOU OPERATE AND ENJOY THE FOLLOWING IMPORTANT ITEMS: YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE Engine oil is at proper level. Fuel tank is fitted with trash, clean, BEST PERFORMANCE SATISFACTION FROM THIS QUALITY...
Page 11
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BA'I-rERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP LIGHT FUEL CHOKE MOWER HEIGHT PARKING BRAKE UNLOCKED...
Page 12
KNOWYOURTRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to famUiadze yourself with the locations of various controls and adjustments. Save this manual for future reference. Attachment Ignition Clutch LeVer Ammeter Lever Plunger Throttle...
Page 13
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
Page 14
These heightsare approximateand may • Start mower blades by engaging vary dependingupon soil conditions, attachment clutch control. height of grass and types of grassbeing • TO STOP MOWER BLADES - disen- mowed. gage attachment clutch control. • The average lawn should be cut to CAUTION: Do not operate the mower approximately 2-1/2 inches during the without either the entire grass catcher, or...
• Pull freewheel control out and down ADD GASOLINE into the slot and release so it is held in • Fill fuel tank. Use fresh, clean, regular the disengaged position. unleaded gasoline with a minimum of • Do not push or tow tractor at more 87 octane.
Page 16
• Insert key into ignition and tum key • The attachments can be used dudng clockwise to "START" position and the engine warm-up period after the release key as soon as engine starts. transmission has been warmed up Do not run starter continuously for and may require the choke control be more than fifteen seconds per minute.
• Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/ brake pedal. • Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly MULCHING...
Page 19
TRACTOR • Tighten bolt securely (27-35 Ft. Lbs. torque). Always observe safety rules when performing any maintenance. IMPORTANT: Blade bolt is Grade 8 heat treated. BRAKE OPERATION T--.=-- =.___ , ,_ Mandrel Assembly If tractor requires more than six (6) feet ===miy _uuu stopping distance at high speed in Blade...
NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Addmg or checking level of electrolyte is not necessary. TO CLEAN BATTERY AND TERMINALS NOTE: Although multi-viscosity oils Corrosion and dirt on the battery and (5W30, 10W30 etc.) improve starting in terminals can cause the battery to =leak"...
overheating. Clean with a wire brush or tion of the cartridge. Do not oil cartddge. compressed air to remove dirt and Do not use pressurized air to clean or stubborn dried gum fibers. dry cartridge. CLEAN AIR INTAKE/COOLING Cover AREAS Knob To insure proper cooling, make sure the Wing...
Page 22
CLEANING We do not recommend using a garden hose to clean your tractor unless the electrical system, muffler, air filter and of all foreign matter. carburetor are covered to keep water out. Keep finished surfaces and wheels Clean engine, battery, seat, finish, etc. Water in engine can result in a short- free of all gasoline, oil, etc.
Page 23
TO LEVEL MOWER HOUSING • Before making any necessary adjust- ments, check that both front links are Adjust the mower while tractor is parked equal in length. Both links should be on level ground or driveway. Make sure approximately 10-3/8". tires are properly inflated (See =PROD- UCT SPECIFICATIONS"...
Page 24
TO REPLACE MOWER BLADE With Parking Brake "Engaged" DRIVE BELT sA" The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake, BELT REMOVAL- • Remove mower from tractor (See =TO Jam Nut REMOVE MOWER"...
TRANSAXLE MOTION CONTROL TO ADJUST STEERING WHEEL LEVER NEUTRAL ADJUSTMENT ALIGNMENT The motion control lever has been preset If steering wheel crossbars are not at the factory and adjustment should not horizontal (left to right) when wheels are be necessary. positioned straight forward, remove...
Page 26
REPLACING BATTERY TO START ENGINE WITH A WEAK BATTERY CAUTION: Do not short battery terminals by allowing a wrench or any CAUTION: Lead-acid batteries other object to contact both terminals at generate explosive gases. Keep sparks, the same time. Before connecting battery, flame and smoking materials away from remove metal bracelets, wristwatch...
Page 27
TO REMOVE HOOD AND GRILL • Remove air cleaner cover, filter and ASSEMBLY cartridge plate to expose carburetor choke (see =AIR FILTER" in the • Raise hood. Customer Responsibilities section of • Unsnap headlight wire connector. this manual). • Stand in front of tractor. Grasp hood at •...
Page 28
then tum out (counterclockwise) 1-1/4 Idle Speed to 1-1/2 turns. FINAL SETTING • Start engine and allow to warm for five minutes. Make final adjustments with Idle Mixture Screw engine running and shift/motion control lever in neutral (N) position. • With throttle control lever in slow Lever position, hold throttle lever against idle speed screw and adjust idle speed...
ethanol or methanol) can attract moistur( Immediately prepare your tractor for which leads to separation and formation storage at the end of the season or if the of acids during storage. Acidic gas can tractor will not be used for 30 days or more.
TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Wilt not start • Out of fuel. • Fill fuel tank. • Engine not "CHOKED" • See "TO START ENGINE" properly. in Operation section. • Engine flooded. • Wait several minutes before attempting to start. •...
Page 31
TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Loss of power • Build-up of grass, leaves • Clean underside of mower and trash under mower. (Continued) housing. • Dirty air filter. • Clean/replace air filter. • Low oil level/dirty oil. • Check oil level/change oil.
Page 32
TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION • Place throttle control in • Engine speed too slow. Poor grass discharge =FAST" position. • Travel speed too fast. • Shift to slower speed. • Wet grass. • Allow grass to dry before mowing. •...
Page 33
TRACTOR - - MODEL NUMBER 917.270921 SCHEMATIC BATTERY AMMETER FUSE STARTER (OPTIONAL) e_cK WHITE ..SOLENOID ..CLUTCH I BRAKE (PEDAL UP) SEAT SWITCH IGNITION NOT OCCUPIED) SWITCH eL_< (CLUTCH OFF) NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. TRE UGHTS ARE NOT CONNECTED TO THE BA'I-rERY, BUT HAVE THEIR...
Page 34
TRACTOR - - MODEL NUMBER 917.270921 ELECTRICAL...
Page 35
TRACTOR - - MODEL NUMBER 917.270921 ELECTRICAL KEY PART DESCRIPTION 163465 Battery 74760412 Bolt, Hex 1/4-20 x 3/4 7603J Tray, Battery 145211 Bolt, Btr Front 1/4-20 x 7-1/2 150109 HolddownBatteryFmnt Mount 12 145769 Nut, Push Nylon Battery Front 1/4 16 153664 Switch Interlock Push-In 166182 Harness, Light Socket (w/4152J)
TRACTOR - - MODEL NUMBER 917.270921 STEERING ASSEMBLY --'-"-- 3?---.._..Jp I...
Page 41
TRACTOR - - MODEL NUMBER 917.270921 STEERING ASSEMBLY PART DESCRIPTION 139768 SteedngWheel 154427 FrontAxle Assembly 169840 Spindle Assembly, LH. 169839 Spindle Assembly, R.H. 6266H Beadng, Race, Thrust, Hardened 121748X Washer 25/32 x 1-5/8 x 16 Gauge 19272016 Washer 27/32 x 1-1/4 x 16 Gauge 12000029 Ring, Klip 3366R...
Page 42
TRACTOR - - MODEL NUMBER 917270921 ENGINE OPTIONAL Spark Arrester EQUIPMENT...
Page 43
TRACTOR - - MODEL NUMBER 917.270921 ENGINE PART DESCRIPTION 162152 Control Thmt Paddle 32 22 17720410 Screw Hex Thd Cut 1/4-20x5/8 T ..Engine (See Breakdown) Bdggs Model No, 461707-O145-E3 149723 Muffler Exhaust Exhaust Asm. Left 144069 144068 Exhaust Asm. Right 138129 Clamp Tube Double Engine 150176...
TRACTOR - - MODEL NUMBER 917.2709621 MOWERDECK KEY PART KEY PART DESCRIPTION NO. NO. DESCRIPTION NO. NO. 165892 MowerHousing 59 141043 Guard, Tuv Idler (94) STD533107 Bolt 149846 Knob Custom Oval 138017 Bracket Assembly,Sway Bar, 68 144959 V.Balt Front 92 STD541437 Locknut, Hex W/Wsh 3/8-16 UNC 165460 Bracket Sway Bar 38/42"...
Page 50
TRACTOR - - MODEL NUMBER 917.270921 HYDROGEARTRANSAXLE- - MODELNUMBER314-0510...
Page 51
TRACTOR -- MODEL NUMBER 917.270921 HYDROGEARTRANSAXLE- - MODEL NUMBER314-0510 KEYPART K]EY PART NO. NO. OESCRIPTION NO. NO. DIES(_IP_ON Rotor, Brake 170351 MainHousing, Assembly 170408 Brake Puck 170352 Side Housing, Assembly 142883 Puck Plate 170353 Center Section, Assembly 142881 Brake Actuating Pin 170354 Swashpiate,TrunionMachined 62 142887...
Page 52
TRACTOR - - MODEL NUMBER 917.270921 BRIGGS & STRATTON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 2ES_ 1019 LABEL KIT I 1132 '1058 OWNER'$ MANUAL lk REQUIRES SPECIAL TOOLS 15 _ TO INSTALL SEE REPAIR INSTRUCTION MANUAL...
TRACTOR - - MODEL NUMBER 917.270921 BRIGGS & STRATTON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 PART PART DESCRIPTION DESCRIPTION Shaft-Throttte 498583 Cylinder Assembly 693485 Kit-Idle Speed 399265 Bushing/Seal Kit 807923 • Gasket-Carburator Body 391086 Yr Seal-Oil 693509 • Pin-Fleat Hinge 493304 Surnp-Engine 693506...
Page 56
TRACTOR - - MODEL NUMBER 917.270921 BRIGGS & STRATTON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 PART PART DESCRIPTION DESCRIPTION 94930 Sorew (Cylinder Shield) 797A 693167 Nut(Starter Terminal) 497596 Motor-Starter 394860 Cap-Drive 690323 Bolt (Starter Motor) 497607 Cap-Eod 497608 Brush Set 691427 Housing-Starter 230674...
Page 59
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SIGHTING GUIDE greater than 15°), never across the face. Make turns gradu- ally to prevent tipping or loss of control. Exercise extreme I& Operate your Tractor up and down the face of slopes (not caution when changing direction on slopes.
Page 60
For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME sM (1-800-469-4663) Para pedir servicio de reparaci6n a domicilio 1-800-676-5811 In Canada for all your service and parts needs call Au Canada pour tout le service ou les pi6ces 1-800-665-4455 For the repair or replacement parts you need: Call 6 am - 11 pm CST, 7 days a week...