Reversing The Door - GE DNCD450GG0WC Owner's Manual

About reversing the door.
Reversing the Door
Tools needed.
• Standard//2 • Tape-tipped • Needle-nosed
Phillips screwdriver puttyknife pliers
V-_ Open the door and remove the filler plugs opposite the hinges. _(_qth the door
completely open, remove the bottom screw flom each hinge on the dD, er face. Insert
these screws about halfway into the
TOP
holes, for each hinge, on the opposite side
(where you removed the filler plugs). Apply tim1 pressure to get the screw started in
untapped holes.
[_-] I,oosen top screw flom each hinge on the dryer face halfway: With one hand holding
the top of the door and the other hand holding the bottom, remove the door flom
the dryer by lifting it UP and OUT
[7_ Rotate the door 180 °. Insert it on the opposite side of the opening by moving the door
uv__a I/I/and DOWN until the top hinge and the bottom hinge are resting on the top screws
inserted in step 1.
iii¸(
i l i I
L
V_ Remove the remaining screws flom the side of the opening flom which the door was
removed. _(_qth these screws secure each hinge at the bottom. Tighten the two top
screws of each hinge. Reinsert the plastic plugs on the side flom which the door w_ts
removed.
8