FENCE
HEIGHT
ADJUSTMENT
See Figure 5.
HEIGHT
ADJUSTMENT
KNOB(S)
_k
WARNING:
Failure to unplug your Detail Biscuit
Joiner could result in accidental starting causing
possible serious personal injury.
TO
HEIGHT
LOWERFENCE
SETrlNG SCALE
Fig. 5
The fence on your Biscuit Joiner can be moved up and
down to adjust the position of the blade in relation to
the top of the workpiece. A scale on both sides of the
front base indicates height settings for both 45 ° and
90 ° angles. The fence and height indicator mark can
be positioned from 5/16 in. to 13/16 in. from the center
of the blade for 45 ° angles. It can be positioned from 0
to 3/4 in. from the center of the blade for 90 ° angles.
Scale marks are in increments of 1/16 in.
TO ADJUST
HEIGHT
SETI'ING
See Figure 5.
•
Unplug your Detail Biscuit Joiner,
_k
WARNING:
Failure to unplug your Detail Biscuit
Joiner could result in accidental starting causing
possible serious personal injury.
•
Loosen the two height adjustment knobs.
•
Pull the fence forward and slide it up or down until
the height indicator mark is aligned with the
desired dimension on the scale.
Note: Slots in the front base align with a tab on the
backside of the fence. See Figure 6. This align-
ment keeps the fence square at each height
setting,
•
Tighten height adjustment knobs securely.
FENCE
ROTATION/ANGLE
ADJUSTMENT
See Figure 6.
The fence on your Biscuit Joiner can be rotated 180 °
and set at either 45 ° or 90 ° angles.
TO ROTATE FENCFJCHANGE
ANGLE
SEI"rlNG
See Figure 6.
•
Unplug your Detail Biscuit Joiner.
ADJUSTMENt
KNOBS
(I) PULL
FORWARD
_IP
FENCE
(2) SLIDE
DOWN
;"o'.'
_
HEIGHT
ADJUSTMENT
KNOBBOLT(S)
FRONT
BASE
SLOTS"
KEY
HOLE SLOTS
FRONT
FENCEORIENTATION
SLOT(S)
BASE
FOR 90° ANGLES
Fig. 6
•
Loosen the two height adjustment knobs.
•
Pull the fence forward and slide it down the front
base until it can be removed through the key hole
slots.
•
Rotate the fence 180 °.
•
Reinstall the fence on the front base. Place height
adjustment knob bolts in key hole slots and align
bolt heads with the slots on back of front base.
•
Slide fence up the front base to desired depth of
cut.
•
Tighten height adjustment knobs securely. See
Figure 6.
11