Know Your Brushwacker; Specifications - Craftsman BRUSHWACKER 636.795454 Owner's Manual

KNOW YOUR BRUSHWACKERTM
Your new BRUSHWACKERT.M. has been carefully packed at the factory to prevent damage during shipping and storage,
however, even with the best of preventative measures, damage does sometimes occur. It is recommended that you follow the
check out procedures listed below:
Remove all items from the carton, lay them out and check the parts to be sure that you have everything required for
assembly. Also check carefully for any visible damage. (IN THE EVENT THAT SOMETHING IS DAMAGED OR MISSING
OR BOTH, NOTIFY YOUR SEARS STORE IMMEDIATELY.)
You should familiarize yourself with the various parts of your BRUSHWACKERT.M. before attempting to assemble or operate
the unit. Refer to drawing below.
SPECIFICATIONS
ENGINE TYPE:
DISPLACEMENT:
OPERATING RPM:
IGNITION:
CARBURETOR:
STARTER:
ON/OFF SWITCH
2 Cycle Air Cooled
37.7 cc (2.30 Cu. In.)
6000
Solid State Ignition
Horizontal Draft,
Float Type
Auto Rewind
Togg le (positive "ON/O F F")
MUFFLER:
CLUTCH:
FUEL TANK:
SPARK PLUG:
SPARK PLUG GAP:
LUBRICATION:
NOTICE:
Lo Tone - w/Cover
Centrifugal
1 Liter (2.1 Pints)
STD 360942
.024" - .028"
Fuel-Oil Mix Between
20 and 25 to 1
For the first twenty hours,
use the mixing ratio of
Between 15 and 20 to 1
SHOULDER HARNESS
DETACHING BELT
HANGING MET
HANDLE
TOGGLE SWITCH
(POSITIVE ON/OFF)
FUEL TANK
STARTER KNOB
CHOKE
LEVER
DRIVE SHAFT HOUSING _,,_.
BRUSH BLADE
HANDLE FIXTURECOMPL
AIR CLEANER
SPLASH
_._--_-_ D E F LECTOR
/
NOTICE
Locate the Model Number of your unit. Record and retain
the number for your records.