Advertisement
MOUNTING
A MITER SAW
,_
WARNING:
Failure to unplug the tool before attaching
it to the stand could
result in accidental
starting and possibly
serious personal
injury.
,_
WARNING:
To avoid serious personal injury, always make sure that miter
saws are fully supported
and securely
attached to a level work surface.
If
necessary,move
the stand to a location
where it will be more stable.
Mounting
Standard
Miter Saws
to The Stand
NOTICE: This allows for the miter
saws on which the 4 mounting
holes form a rectangular
pattern
(most miter saws).
1.
Mount your miter saw to
the mounting
brackets
(B)
using the mounting
bolts
(D), washers (E), self-locking
washers
(F) and locking
nuts
(G) (Fig. 5).
2.
With the miter saw mounted
on the mounting
brackets,
place it on the stand (Fig. 6).
iNSTALLiNG THE
QUICK=RELEASE
MOUNTING BRACKETS
1.
Hold the quick-release
mounting
bracket
(B) by
the handles.
2.
Position the F points first on
the frame assembly
(A)
(Fig. 7).
3.
Press the handle down to
mount the quick-release
mounting
brackets
(B) onto
the frame assembly.
Fig. 6
Fig
Handle
16492
Manual_Revised_12
0528
Page 11
Advertisement
