1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Lawn Mower
  5. 536.257670
  6. Owner's manual

Craftsman 536.257670 Owner's Manual

15.0 hp twin cylinder all-wheel steer 43" mower deck 6-speed transaxle lawn tractor
Hide thumbs Also See for 536.257670:
Table of Contents

Advertisement

Quick Links

,,,,,
,,,
,,,
--,,,,,
,,,,
Caution:
Read and follow
all Safety Rules
and _nstructions
Before Operating
This Equipment
o AssembUy
o Operation
o Customer Responsibilities
o Service and Adjustment
o Repair Parts
®
=,.,,,
,,
,,
,,
SEARS, ROEBUCK
AND CO., HOFFMAN
ESTATES, IL 60179
,=,,,,,,,.,,,
,,,,,,
,,,
,,.,,
,,,,,,,,,
,,,

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 536.257670

Summary of Contents for Craftsman 536.257670

  • Page 1 ,,,,, --,,,,, ,,,, ® Caution: Read and follow all Safety Rules and _nstructions Before Operating This Equipment o AssembUy o Operation o Customer Responsibilities o Service and Adjustment o Repair Parts =,.,,, SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 ,=,,,,,,,.,,, ,,,,,, ,,.,,...

  • Page 2: Brake

    SAFETYRUL S THESE INSTRUCTIONS ARE FOR YOUR PROTECTION. PLEASE READ THEM CAREFULLY. IMPORTANT 7HIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS FAILURE TO OBSERVE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. GENERAL OPERATION: mower could suddenly turn over tf a wheel is over the edge of a cliff or ditch, or if en edge caves in Know controls and how to stop qulckty.
  • Page 3 PRODUCT SPEClFnCATBONS CONGRATULATIONS on your purchase of a Sears Craftsman Tractor It has been designed, engineered HORSE POWER: 15.0 and manufactured to give you the best possible depend- GASOLINE 2 GALLONS ability and performance CAPACITY: UNLEADED REGULAR Should you experience any problem you cannot easily...
  • Page 4 TABLE OF CONTENTS SAFETY RULES ..........OPERATION ........... 11-15 PRODUCT SPECIFICATIONS ...... SERVICE AND ADJUSTMENTS ... 22-32 TROUBLE SHOOTING ......33-34 CUSTOMER RESPONSIBILITIES__3, 17-21 WARRANTY ..........STORAGE ........... TABLE OF CONTENTS ........ REPAIR PARTS ........36-59 INDEX ............ENGINE REPAIR PARTS ......
  • Page 5 A C CESSORIES A ND A TTA CHMEN TS These accessories and attachments were availabfe when the unit was purchased They are also available at most Sears retail outlets, catalog and service centers Most Sears stores can order these items for you when you provide the model number ol your tractor CUSTOMER ENGmNE...
  • Page 6 CONTENTS OF HARDWARE PACK Parts packed separately in carton Steering Wheel Battery Acid 1 - Mulching Plug Owner's Manual 1-Video Parts Bag Parts Bag contents shown actual size unless noted Steering Wheel Assembly Parts ® 2 - Lockwashers 2. Carriage Bolts 5/16-18 x =75 1 - Spacer 2 - Wingnuts 1 - Spring Pin...
  • Page 7 ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY STEERING A socket wrench will make assembly easier Standard wrench WHEEL sizes are listed. (1) Pliers (1) Utility knife SPACER SPRING PIN (1) Screwdriver (Small Phillips with a 1/4 inch shank) STEERING (1) Hammer (1) Tire pressure gauge (2) 7/16 inch wrenches CLUTCH LEVER...
  • Page 8 A SSEMBL Y HOW TO SET UP YOUR TRACTOR DANGER PREPARE BATTERY Always disconnect negative (black) cable first. For shipping purposes, battery is installed Remove battery Removing positive cable first can result in sparks (see TO REMOVE BATTERY instructions below) the wrench touches any metal surface.
  • Page 9 ASSEMBLY TO LEVEL MOWER DECK CAUTION: Handle electrolyte with care° For best cutting results the mower deck has been leveled at the It is an acid and poison. Always wear eye factory and should not require any adjustment If in the event shields, and protect skin when handling the deck should need to be adjusted see TO LEVEL MOWER acid or battery°...
  • Page 10 ASSEMBL Y Place hook end of battery hold-down rod through large DANGER hole in main frame and hook into small hole in front of battery Always connect positive (red) cable firsL Connect- ing negative cable first can result in sparks if the Place threaded end of hold-down rod through...
  • Page 11 OPERATION ..,i KNOW YOUR TRACTOR READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare illustrations (see Fig. 7) with your tractor to familiarize yourself with !ocations of various controls and adjustments Save this manual for future reference, CHECK STARTING SEQUENCE INDICATOR...
  • Page 12 OPERA.ON The operation of any tractor can result in foreign objects being thrown into the eyes, which can result in severe eye damage Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs We recommend standard safety glasses, available at SEARS Retail or Catalog Stores, or a wide vision safety mask for over your glasses EP, AKE...
  • Page 13 OPERATION TO SELECT MOWER CUTTING HEIGHT (See Fig. 8) The cutting height is selected by placing the memory rod in the desired height position The cutting height range is approximately 2 to 4 inches PEDALLATCH Press cutting height adjustment pedal all the way down until it latches CUTTING HEIGHT...

  • Page 14: Carburetor

    OPERATION BEFORE STARTING THE ENGINE TO START ENGINE CHECK ENGINE OIL LEVEL When starting engine for first time or if engine has run out of fuel, it will take extra cranking time to move fuel from tank to Read OPERATION and CUSTOMER RESPONSIBILITIES engine...

  • Page 15: Side-To-Side

    OPERATION MOWING TiPS CAUTION: Look down and behind before Do not use tire chains when mower housing is attached to and while backing,, Disengage mower unit blades before backing up. Run the engine at FAST speed position. Control forward ground speed with shift control lever in accordance with type...
  • Page 16 CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS BEFORE EACH USE Check engine oillevel. The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence, To receive fuUvalue Check brake operation. from warranty, operator must maintain lawn tractor as instructed Checktire pressure in this manual Check for loose fasteners...
  • Page 17 CUSTOMER RESPONSIBILITIES LUBRiCATiON CHART Orientation view only,, Do Not stand on end. (_STEERING GEAR FRONT AXLE PIVOT POINTS WHEEL BEARINGS WHEEL BEARINGS END OF DRAG LINK SECTOR GEAR ) AND BOTTOM STEERING SHAFT VIEW FROM LEFT SIDE OF TRACTOR END OF UNIVERSAL JOINT (SAME ON...
  • Page 18 CUSTOMER RESPONSIBiLITiES TRACTOR Always observe safety rules when performing BENT TIP maintenance. BLADE EDGE MOUNTING BRAKE OPERATION SCREWS Your tractor is equipped wit h an edjustable disc brake To check brake operation do the following: Stop tractor on a level surface and place shift control lever in NEUTRAL position.
  • Page 19 CUSTOMER RESPONSIBILITIES TO SHARPEN BLADE (See Fig. 13) CENTER HOLE BLADE Care should be taken to keep blade balanced An unbalanced blade wil! cause excessive vibration and eventual damage to mower and engine. Blade can be sharpened with a file or on a grinding wheel Do not attempt to sharpen while on mower Place center hole of blade over head of the nail or end of a screwdriver clamped horizontally in a vice...
  • Page 20 CUSTOMER RESPONSIBILITIES ENGINE LUI3RDCATION Read ENGINE instructions in this section and OPERATION section of this manual before trying to start engine. NOTE: Be sure oil has been added to engine crankcase before trying to start engine. OIL RECOMMENDATIONS Only use high quality detergent oi! rated with API service classification SG Select the oil's SAE viscosity grade according to your expected operating temperature:...
  • Page 21 CUSTOMER RESPONSiBiLITiES AIR FILTER (See Fig. 19) Your engine will not run properly and may be damaged by using a dirty air filter, Clean foam pre-cleaner element after AER CLEANER COVER every 25 hours of operation or every season Service paper cartridge every 100 hours or every season, whichever occurs WING NUTS first Service air cleaner more often under dusty conditions...
  • Page 22 SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS • Depress brake-clutch pedal and set parking brake° Place shift control lever in NEUTRAL position. Place attachment clutch lever in DISENGAGED posittom Turn Ignltlon key OFF and remove key. Make sure the blades and all moving parts have completely stopped. TRACTOR FRONT TO REMOVE...

  • Page 23: Mower Deck Height

    SERWCE AND ADJUSTMENTS Slide deck toward front of tractor Pull lower engine pulley belt guides away from engine and slip mower deck drive MOWER DECK belt onto lower engine pulley Reposition belt guides to ENGAGEMENT CABLE MOWER DECK 1/16" from pulley BELT GUARD OPEN SIDE Underneath the footrests of the tractor, remove hairpin...
  • Page 24 SERVICE AND ADJUSTMENTS FRONT-TO-REAR ADJUSTMENT ( See Fig 26B) Measure height, from level surface, of right side blade tips at fro nt and rear of mower deck If distances are equal or net more than 1/8 inch lower in front, no adjustment is neces* sary FRONT ADJUSTMENT If adjustment is necessary, loosen front eccentric mounting...
  • Page 25 SERV#CE AND ADJUSTMENTS TO ADJUST BLADE DRIVE BELT MOWER DECK CABLE ENGAGEMENT (See Fig. 28) MOWER DECK BELT GUARD When mower blade drive belt slips and blades will net turn at full speed when mowing, the blade drive belt should be CdN_ tightened MOWER...
  • Page 26 SERWCE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT MOWER DECK ENGAGEMENT CABLE (See Fig. 29) MOWERDECK BELT GUARD MOWER CLUTCH Remove mower deck (see TO REMOVE MOWER DECK CABLE SPRING in this section IDLER PULLEY Remove mower deck belt guard BELT RETAINER Note position of belt retainer on idler pulley so it can be can be repositioned properly after belt installation Loosen idler...

  • Page 27: Seat

    SERWCE AND ADJUSTMENTS TO REPLACE TRACTOR DRIVE BELT Odantatlon viow onty. Do Not stand on end (See Figs. 31 and 32) LOWER ENGINE PULLEY BELT GUIDES Your tractor uses v-belts made of special compounds Ifany belt LOWER becomes worn or breaks, replace with original equipment belt ENGINE (see REPAIR PARTS section of this manual) NEVER USE A PULLEY...
  • Page 28 SERVICE AND ADJUSTMENTS TO ADJUST TRACTOR BRAKE (See Figs. 34A & 34B) Your tractor is equipped with an adjustable disc brake mounted on the transaxle TO CHECK BRAKE OPERATION - • Stop tractor on a hard fiat surface and turn off engine Place shift control lever in NEUTRAL position BRAKE ADJUSTING...
  • Page 29 SERVICE AND ADJUSTMENTS TO REMOVE WHEEL FOR REPAnRS ,'RA RO0 SRACK (See Figs. 37A and 37B) Block up axle securely On front wheels, remove hub cap, retaining ring and washer(s) to remove wheel On rear wheels, remove hub cap and bolts to remove wheel BRAKE LE Repair tire and re-assemble...
  • Page 30 AND ADJUSTMENTS SERVICE TO START ENGINE WiTH A WEAK RUBBER SOOT NEGATIVE(-) POSITIVE(+) BATTERY (See Fig. 38) TERMINAL TERMINAL CAUTION: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.
  • Page 31 SERVICE AND ADJUSTMENTS TO REMOVE HOOD (See Figs. 41 and 42) HEADLIGHT WIRE HARNESS CONNECTOR • Raise hood Disconnect headlight wire harness connecter Remove screw used to atlach hood lanyard to front of HOOD MOUNTING engine, Hold hood securely to prevent hood from falling BRACKET •...
  • Page 32 SERVICE AND ADJUSTMENTS THRO'I-I'LE CONTROL ADJUSTMENT "i'HROTTLE r_ (See Fig. 44) The throttle control has been preset at factory and adjustment should not be necessary Check adjustment as described below before loosening clamp screw If adjustment necessary, proceed as fellows Engine speed is controlled my movement of the throttle control lever.
  • Page 33 TROUBLESHOOTING POINTS CAUSE CORRECTION PROBLEM Fill fuel tank Out of fuel Will not start See TO START ENGINE in Operation section Engine not _CHOKED" properly Wait several minutes before attempting to start Engine flooded Replace spark plug Bad spark plug Clean/replace air filter Dirty air filter...
  • Page 34 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Unit will not shift Shifting procedure incorrect Check shifting procedure Unit MUST come to a or shifts hard complete stop before changing directions Tractor drive belt and/or brake out of adjustment Check adjustment of tractor drive belt and/or brake Adjust if necessary Transax]enotoperatingpreperly Contact Sears Service Department...

  • Page 35: Cleaning

    S TOFtA GE ENGINE Immediately prepare your unit for storage at the end of the season or if the unit will not be used for 30 days or more FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT DANGER DEPOSITS FROM FORMING IN ESSEN- TIAL FUEL SYSTEM PARTS SUCH AS...
  • Page 36 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 CHASSIS & HOOD ASSEMBLY REF, REF. MOWER SUSP HOOD REF, STEERING FRONT AXLE ASSY NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALL UNNUMBERED Use of service/replacement paris other than original equip- ITEMS ARE INTERCHANGEABLE ment parts may void your warranty...
  • Page 37 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION 326580-854 FRAME, MAIN ..314799 FOOT PAD. LH "P-LIFT" 310006 FOOT PAD, RH 22 12LG . 309235 FASTENER, RATCHET BLACK 323968-853 BRACKET. GRILLE 313541-853 BRACKET. FRONT AXLE SCREW, 5/16-16X 75WDFLLI_ 56030...
  • Page 38 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.25"76700 CHASSIS & HOOD ASSEMBLY MOTION DRIVE PAGE ® KEY#23 REF. KEY#1 NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALLUNNUMBERED Use of service/_eplacement parts other than original equip- ITEMSAREINTERCHANGEABLE meet parts may void your warranty WITH OPPOSITESIDE...
  • Page 39 SCREW 3/8_16X1 00 WAHHSPTAPPL 150079 SCREW, 5/16-18Xl O0 HHC ..120393 WASHER. FLAT .344X .69X 065 1498 NUT, 5/16-18 REGHEXCTRLK ..... 321863 SEAT V540 CRAFTSMAN W/RED TRIM 180077 SCREW, 5/16-18X 75 HHC .... 120638 WASHER. HVSPTLK 328X 60X.09 120393 WASHER...
  • Page 40 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 MOWER SUSPENSION ASSEMBLY DETAIL "A" REF. SOLENOID KEY#18 CHASSIS & HOOD PG MAIN FRAME ALL UNNUMBERED NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ITEMS ARE INTERCHANGEABLE Use of service/replacement parts other than original equip- WITH OPPOSITE SIDE 322997 H ment parts may void your warranty.
  • Page 41 CRAFTSMAN 43" LAWN TRACTOR MODEL 536,2576700 KEY# PART# DESCRIPTION 320075-853 BRACKET.CLUTCH ENGAGE LEVER 180079 SCREW, 5/16-18X1 00 HHC . .. 120393 WASHER FLAT .344X .69× 065 1498 NUT, 5/16-18 REGHEXCTRLK 317089 ASSY, CLUTCH LEVER ....50148 BEARING 5031DX ,63ODX 50 8260 PiN, HAIR O91 DIAX166LG.,...
  • Page 42 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 FRONT STEERING ASSEMBLY CHASSIS & HOOD PG (STEERING WHEEL (DASH) & HARDWARE) CHASSIS & HOOD PG (MAIN FRAME) REF KEY % CHASSIS & HOOD PG SUPPOR_ REF. TIRE TREAD PAGE NOTE: ALWAYS USE ORIGINAL EQUIPMENT...
  • Page 43 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION AXLE.FRONTASBY LONGSUS4WS 31017O AXLE, FRONT ..52407 SPINDLE BEARING 318539 ABSY.SPINDLE.RH ..318544 ASSYSPINDLE,LH LG ....36625 RING. RETEX 57X 05TRU5133-75 ..53373-853 AXLE COVER ......... 304590 TIE ROD ASSY 19 81LG W-SECTION...
  • Page 44 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 REAR STEERING ASSEMBLY CHASSIS & HOOD PG (MAIN FRAME ._.,., _ _,_:_:_:_ _i,: -_ _ .-_"._..• ,..+ FRONT STEERING PG (SECTOR GEAR) NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALL UNNUMBERED Use of service/replacement...
  • Page 45 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION 303222_853 BRACKET X-AXLE MTG 4WS 180091 SCREW, 5/16-18X2 50 HHC ..120393 WASHER, FLAT .344X .69X 065 ..1498 NUT, 5!16-18 REGHEXCTRLK .... 35498 SCREW, 5/16q8X 75 WAHHTAP 326135 U-JOINT, ASM. 4WS LD ....
  • Page 46 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 MOTION DRIVE ASSEMBLY ELECTRICAL PAGE GROUND WIRE & HARDWARE CHASSIS & HOOD PAGE ALL UNNUMBERED NOTE RIGINAL EQUIPMENT ITEMS ARE INTERCHANGEABLE Use of service/replacement parts other than original _RqTiS: WITH OPPOSITE SIDE 328041B ment parts may void your warranty.
  • Page 47 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION TRANSAXLE P930-042 6SP4WSLF 303109 PULLEY, 6.60D V4L T/A ... 50795 KEY, HFPRO 606 .75DIAX 187WD. 22053 RING, RETEX 58X.035TRU5100-62 3!4120._ BELT, V 4L 87 25 4WS LF ..180091 SCREW, 5716-18X2 50 HHC ..
  • Page 48 CRAFTSMAN 43" LAWN TRACTOR iVIODEL536.2576700 MOTION DRIVE ASSEMBLY ENGINE PG ENGINE ENGINE SHEAVE ENGINE PAGE STEERING HUB ASSy TIRE TREAD PG ALL UNNUMBERED NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ITEMS ARE INTERCHANGEABLE Use of sewice/replacement parts other than original equip-...

  • Page 49: Brake Rod

    CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY # PART# DESCRIPTION 321514 SPRING. DRAG LINK BIAS ..304016 GUIDE, BELT R.H ....1496 NUT, 5/16-18 REGHEXCTRLK ..325942 PEDAL ASSY.BRAKE/CLUTCH 319675 PIN, CLEVIS .SO0DX4,53LG 57847 SPRING, BRAKE PEDAL ... 2968 WASHER, FLAT 504X .75X 059...
  • Page 50 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 ENGINE & CONTROL ASSEMBLY ENGINE SCREWS ® NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALL UNNUMBERED ITEMS ARE INTERCHANGEABLE Use of service/replacement parts other than original equip- WITH OPPOSITE SIDE ment parts may void your warranty...
  • Page 51 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION ENGINE B&S 15HP TWN I/C (SEE ENGINE MANUAL) 50947 SCREW, 3/8-16X1 25 WAHHTAPBLKP 138489 WASHER, EXLK.384X.69X 04 ..305550 MUFFLER,16/18HP LARGE LO-TONE 305552 EXHAUST TUBE 18RP B&S RH 305551 EXHAUST TUBE 18HP LH 55640 GASKET, MUFFLER ..
  • Page 52 CRAFTSMAN 43" LAWN TRAC'I'OR MODEL 536.2576700 PRE-PAINTED DECK ASSEMBLY KEY # NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALL UNNUMBERED Use of service/replacement parts other than original ITEMS ARE INTERCHANGEABLE equipment parts may void your warranty WITH OPPOSITE SIDE 327957 D...
  • Page 53 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION 325116 43" DECK KIT ..326490-853 TOE GUARD - MULCHER. 180077 SCREW, 5/16-18X 75HHC ..1498 NUT, 5/16w18 REGHEXCTRLK 18OO77 SCREW. 5/16-18X 75 HHC 1498 NUT, 5/16q8 REGHEXCTRLK ..317017 BRACKET CHUTE MOUNT...
  • Page 54 CRAFTSMAN 43" LAWN TRACTOR MODEl.. 536.2576700 FINAL DECK ASSEMBLY \<" REF. MOWEF NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALLUNNUMBERED Use of service/replacement parts other than original equip- ITEMSAREINTERCHANGEABLE WITH OPPOSITESIDE 327958 D men parts may void your warranty...
  • Page 55 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION 329036 DECK,43_MULCHING MOWER 58306 ROD, DECK HITCH ..6260 PIN, HAIR 09! DIAX1 66LG 1346 RETAINER, BELT ...... 314107 SPRING,TENSION 5 0OLG+17LB/IN 310326 PULLEY, IDLER BFF 4.00 WIDE FL 126416 BOLT, 3/8-16X1.75 CARRLN ..
  • Page 56 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 ELECTRICAL ASSEMBLY NOTE: ALWAYS USE ORIGINAL EQUIPMENT PARTS ALL UNNUMBERED Use of service/replacement parts other than original equip- ITEMS ARE INTERCHANGEABLE ment parts may void your warranty WITH OPPOSITE SIDE 327959 B...
  • Page 57 CRAFTSMAN 43" LAWN "TRACTOR MODEL 536.2576700 KEY# PART# DESCRIPTION 326810 HARNESS 14-18BSTWIN.,WRAP. 41482 PRESS CLIP,1 390LG 2551D 303064 ASSY LIGHT WIRE-l/4 TURN 52572 BULB, HEADLAMP .... 57444 TiE, CABLE BLACK NYLON 5 62 41482 PRESS CLiP 1380LG .2551D ....327355 SWITCH-IGN.(AFTER...
  • Page 58 CRAFTSMAN 43" LAWN TRACTOR MODEL 536.2576700 DECALS MOWER STEERING DECK WHEEL 333153E r'_t...
  • Page 59 SEARS 15HP I/C GOLD DECAL LH ..322899 DECAL, CUSTOMER RESPONSIBILITY 402457 CRAFTSMAN GRILLE DECAL. 322909 DECAL, REFLECTOR, GRILLE 328483 DECAL, DASH, CRAFTSMAN ..... 322904 DECAL, CONSOLE 43/6SP RH ..322905 DECAL. CONSOLE, 43/6SP LH ..322908 DECAL. CONSOLE WARNING ..308766 DECAL, CRAFTSMAN (RED) STEEL ..
  • Page 60 ENGINE REPAIR PARTS ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL 536.2576700 ASSEMBLIES INCLUDE PARTS SHOWN IN FRAMES 524A I _15A INSTRUCTION MANUAL. KEY# PART# DESCRIPTION 494533 CYLINDER ASSEMBLY 491756 BEARING-CYLINDER *391088 SEAL-OiL 493457 HEAD-CYLINDER 493458 HEAD-CYLINDER '271867 GASKET-CYLINDER HEAD #1 "271868 GASKET-CYLINDER HEAD #2...
  • Page 61 ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL 536.2576700 ASSEMBLIES'INCLUDE PARTS SHOWN IN FRAMES 634A 552A 615 @" 615 q_ r,-_J -q 616 I <_ 220 KEY# PART# DESCRIPTION 393382 CRANKSHAFT ..NOTE ..FOR TIMING GEAR KEY - ORDER PART No 94196 222698 KEY-FLYWHEEL 394955...

  • Page 62: Carburetor

    ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL 536.2576700 ASSEMBLIES INCLUDE PARTS SHOWN IN FRAMES _119 37 860 52 i 1121 CARBURETOR' KEY# PART# DESCRIPTION KEY# PART# DESCRIPTION 213290 MANIFOLD-INTAKE 94152 SCREW-HEX *.271412 GASKET-CARBURETOR 491539 CARBURETOR 281411 SOAOER-CARBURETOR •223472 PLUG-WELCH *270884 GASKET-INTAKE MANIFOLD 262684...
  • Page 63 ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL 536.2576700 ASSEMBLIES INCLUDE PARTS SHOWN IN FRAMES _' 284 KEY# PART# DESCRIPTION BODY-AIR CLEANER 496599 NUT-WING 94289 299146 LINE-FUEL (28" LONG) (CUT TO SUIT) 224995 SHIELD-SPITBACK FILTER-FUEL 493629 SCREW-HEX HD, 94264 CARTRIDGE-AIR CLEANER 394019_ CLAMP-FUEL PIPE 223167...
  • Page 64 ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL536.2576700 ASSEMBLIES INCLUDE ALL PARTS SHOWN IN FRAMES __422523 2o_9A KEY# PART# DESCRIPTION 262683 UNK-GOVENOR NUT-SQUARE 94298 SPRING-COMPRESSION 262337 SPRING=GOVENOR 262441 209A 261563 SPRING-GOVENOR IDLE SCREW-PAN HD, 94297 491297 LEVER ASSY-GOVENOR 222289 WASHER 93949 SCREW-SEM SCREW-HEX HD 284A...
  • Page 65 ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR iVIODEL536.2576700 ASSEMBLIES INCLUDE PARTS SHOWN IN FRAMES 308.1_ KEY# PART# DESCRIPTION 495587 HOUSING-BLOWER 94686 SCREW-SEM 305A 93343 BCREW-SEM 306 1 222846 SHtELD-CYLINDER 306 2 223734 SHIELD-CYLINDER 94396 SCREW 399 1 224774 COVER-AIR GUIDE 308 2 224775 COVER-AIR GUIDE 491304...
  • Page 66 ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL 536.255870 ASSEMBLIES INCLUDE ALL PARTS SHOWN IN FRAMES 353 _) _'_ _354 _332 1006 I OO5 _635 KEY# PART# DESCRIPTION 491180 FLYWHEEL WASHER 222511 SGREW-SEM 94834 93535 SCREW NUT-HEX. 230674 ARMATURE GROUP 394891 SCREW-SEM 94731 PLUG-SPARK...
  • Page 67 ENGINE MODEL 402707-1242-01 FOR 43" TRACTOR MODEL 536.255870 ASSEMBLIES INCLUDE PARTS SHOWN IN FRAMES KEY# DESCRIPTION PART# MOTOR-STARTER 394808 BOLT-THRU 94003 BRUSH-STARTER 395538 STARTER-DRIVE 495878 STARTER-DRIVE 398003 ARMATURE-STARTER 390837 SCREW-HEX HD 93585 GEAR 280104 394860 CAP-DRIVE CAP-END 395537 HOUSING-STARTER 398159 KIT-SPRING 495877 PIN-ROLL...
  • Page 68 TRANSAXLEREPAIR PARTS TFIANSAXLE MODEL FOR 43" TRACTOR MODEL 536.2576700...
  • Page 69 TRANSAXLE MODEL FOR 43" TRACTOR MODEL 536.2576700 DESCRIPTION KEY# PART# KE"!# PART# DESCR|P"_ON Pad, Brake Cover, Transaxle 790006 772109A Pin, Dowel Bearing, Needle 766026 780086 Washer, Flat Case, Transaxle 792076A 770103A Lever, Brake Sha1L Counter 790004 776260 Screw, 1/4_20 x 1-1/4 " Shaft &...
  • Page 70 CRAFTSMAN 43" LAWN TRACTOR IVtODEL536.2576700 ,,,,, lu,, TIRE SIZE "A ..B ..C ..D" 11 X 4.00 - 5 42295 319679 13 X 5,00 - 6 41060 319680 15 X 6,00 - 6 39830 316702 301140 313952 16 X 4_80 - 8...
  • Page 71 CRAFTSMAN 43" LAWN TRACTOR MODEL536o2576700...
  • Page 72 ® OWNER'S 15.0 HP TWHNCYLIND MANUAL ALL=WHEEL STEE 43" MOWE DECK 6°SPEED TRANSAXLE LAWN TRACTO Each tractor has its own model number Each engine has its own model number The Model Number for your tractor will be found on the model plate located under the seat The model number for your engine will be found on the blower housing of the engine...

Table of Contents