Philips EL2 Series Manual

6 V, 12 W A
EL2WN
6.4"
(16.3 cm)
6.7"
(17.0 cm)
RCHITECTURAL
Features
Illumination: Two rotatable
reflector assemblies with
adjustable beam patterns. Unit
includes 6 VDC, 6 W halogen
lamps housed in impact-
resistant lamp covers*.
* Replacement lamping: No. 784, T2.25,
G-4 two pin base, 6 V, 6 W miniature
2.5"
lamp.
(6.4 cm)
Housing: Impact-resistant,
injection-molded UL 94-5VA
flame retardant thermoplastic
housing. UV-stabilized to resist
discoloration. White finish is
standard, black is optional. Unit
is ceiling or wall mountable.
Battery: Maintenance free,
sealed nickel metal hydride
battery with 10 year life.
NiMH battery is a non-toxic,
environmentally friendly
product which is recyclable.
EL2 Series
E
MERGENCY
Electronics: 120/277
VAC dual voltage input.
Microprocessor controlled
charge, transfer, and
monitoring system. Charging
system is complete with
low voltage disconnect,
AC lockout, and brownout
protection. Includes an AC
indicator/systems status lamp
and manual test switch.
Self-Testing Diagnostics
(standard): Unit runs an
internal test every five seconds
for secondary voltage, charge
current, battery voltage, and
LED illumination. Performs
automatic 1 minute discharge
test every 30 days and
30 minute discharge test
every 180 days meeting and
exceeding UL 924 and NFPA
101 requirements. The infrared
option allows a remote control
to initiate a 5 second and 30
minute self-test in addition to
the standard 1 minute and 90
minute manual test capability.
Job Information Type:
Job Name:
Cat. No.:
Notes:
L
IGHTING
Page 1 of 2
Electrical Specifications:
(120 VAC) .103 A, 11.3 W
(277 VAC) .044 A, 11.6 W
Code Compliance
UL 924 listed. NFPA 101
illumination standards.
Warranty
Three year full electronics
warranty. Five year full plus
five year prorated battery
warranty.