Table of Contents
Advertisement
Selecting the Colour System
You can setup the colour system of this unit to match up your
connected TV set. If the colour system of this unit is different
from that of the TV set, the images can not be displayed nor-
mally on the screen. The default setting is MULTI.
1
Press SETUP button to enter SETUP MENU. Use
select GENERAL SETUP (see page 20), and then press
ENTER button.
2
Highlight TV TYPE using / , then press
the right option list. Select MULTI, NTSC or PAL using / ,
then press ENTER to confirm your selection.
3
Press SETUP again to exit menu.
Note:
•
You can change the colour system of the unit temporarily
using NTSC/PAL button on the remote control.
22
/
button to go to
MULTI
NTSC
PAL
Selecting the Audio Output
M o d e
You must setup the audio output mode correctly, if not, you will
not get the audio outputs. The default setting is ANALOG.
•
ANALOG: If the SPEAKERS outputs on the rear panel are
connected with speakers directly, or the AUDIO OUT (2 RCA
to
jacks) is connected to amplifier, select this item.
•
SPDIF/RAW: If the COAXIAL or OPTICAL output on the rear
panel is connected to a receiver with built-in Dolby Digital,
DTS or/and MPEG decoder, select this item.
•
SPDIF/PCM: If the COAXIAL or OPTICAL output is connected
with a receiver which accepts PCM audio signal, select this
item.
1
Press SETUP button to enter SETUP MENU. Use
select GENERAL SETUP (see page 13), and then press
ENTER button.
2
Highlight AUDIO OUT using / , then press
to the right option list. Select ANALOG, SPDIF/RAW or
SPDIF/PCM using / , then press ENTER to confirm your
selection.
3
Press SETUP again to exit menu.
Note:
•
If the SPDIF/RAW is selected and the audio source is LPCM
(DVD), the outputs in the COAXIAL and OPTICAL are PCM.
•
If the SPDIF/RAW is selected and the audio source is audio
CD, the outputs in the COAXIAL and OPTICAL are PCM.
•
If the ANALOG is selected, the COAXIAL and OPTICAL will
not have audio outputs.
•
If your speaker system does not match your AUDIO OUT
setting, you will not be able to enjoy the true original sound.
/
button to go
ANALOG
SPDIF/RAW
SPDIF/PCM
to
Advertisement
Table of Contents
