6 Change settings
The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
exit the menu, press
Language settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Menu language]: Select a display
•
language for menu.
•
[Audio]: Select an audio language for
discs.
•
[Keyboard layout]: Select a keyboard
in your language.
[Subtitle]: Select a subtitle language
•
for discs.
[Disc menu]: Select a menu language
•
for discs.
Note
•
If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual (see
'Language code' on page 49).
•
If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
BACK. To
(Home).
Picture and video settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[TV display]: Select a picture format to
•
fit the TV screen.
[HDMI video]: Select the resolution of
•
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
[HDMI Deep Color]: Recreate the
•
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
[Picture settings]: Select pre defined
•
color settings for the video display.
Select [User] to create your own
setting.
[Watch 3D video]: Set HDMI video to
•
support 3D or 2D video.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Night mode]: For quiet listening,
decrease the volume of loud sounds
EN
32