Hitachi 20SA2B Operating Manual page 12

(_ MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
(_) CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9. Use the "100" button for channels
100 and higher.
Channel selection may also be performed by pressing channel up (&) or down (T).
NOTE: THE TV MAY NOT RECEIVE SOME CHANNELS IF YOU ARE NOT IN THE CORRECT AIR/CABLE
MODE. SEE PAGE 15.
(_) AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the video input jack each time the button
is pressed.
STEREO
STISA
VIDEO
12