JVC AV-27D500 User Manual page 9

(D
PLUG IN MENU
SET CLOCK
The C/_k _ the heart of all #met
funcll_,s, The c/Gck must be set
before the timer functions v, o rk.
&V To SET CLOCK
• • To operate
• • TO setthehour (AM/PM)
• To move to minutes
• • To settheminutes
• To move toSTART CLC_K
when done with settings
• • To start theclock
CLOCK _ ON/OFF TIMER
MESSAGE
If you do not set the clock but
attempt to use the On/Off Timer, you
will get the following message:
FINISH
Once you have set up the items in the
Plug/n Menu you must select Finish.
&• TOFINISH
• • Toexit
Note: Y_J can resst tho preferences that
you set here in the Plug In Menu via the
regular JVC Menu system.
<1• To set the hour (AM/PM)
• To move to minutes
• • To set the minutas
• To move to START CLOCK
when done with settings
• • To start the clock
CHANNEL SUMMARY
You can add or delete channels from
channel scanning. You can also k;ck
out any "unauthorized" viewers from
one or up to all 125 channels.
(_ Press the MB_tj Button
&• To CH/C_NELSUMMARY
• • To operate
Note: Noise MutJng will not work while
you are in the Channel S_mmary menu.
You can manuallyset chanr_.s to scan
63atwere too weak to be piskeci up
dodng Aufo Tuner Sstag. Con•seedy, if a
channel was too weak to _ a good
_lure but was picked up anyway, delete
it by remo_ng the _L(If you have not
pe_ _e Asto TO_erSetup
doscribab on page 15. do so n_v.)
(_ _ -/+ to se_ct the c'nannel
&• To the SCAN column
• • To include or delete from scan
I_ Exrrwhen finished
Note: Channels set to scan will be
marked with an -_.
Note: S_ne cable systems experience
interference from radio frequermie6
Cable Channel 95. If you like, you can
delete this channel from scanning by
removing _e q.
Comft_u_t a_ove...
INITIAL SETUP
CHANNEL GUARD - LOCK
&• TOCHANNEL SUMMARY
• • To operate
&• TO the L.cx_k column
The access code zero (0) to
lock or unlock that channel
Use the CHAN_L -/+ button to go to any
othe[ channel you want _olock
(_
EXIT when finished
CHANNEL GUARD MESSAGE:
This message appears when a viewer
attempts to watch a guarded channel :
To watsh a channel you have iscked,
enter the lock code ualng the 10 key pad.
If the wrong lock cede is entered, this
message will appear:
Note_ See _Set Lock Code'_ for more
information_