Starting/Cancelinga Function; Ultrabake Tm Baking/Roasting - Kenmore 665.75775 Use & Care Manual

STARTING/CANCELING A FUNCTION
After setting a function, you must press START/
P,,s,c ENTER to start the function. If you do not
press START/ENTER within 5 seconds of
setting, "START?" will show on the
display as a reminder. If you do not press
START/ENTER within 5 minutes of setting, the time
of day will appear.
OFF/CANCEL will cancel any function except the
clock, timer, or control lock. When you
press OFF/CANCEL, the display will show
the time of day or, if the minute timer is
also being used, the time remaining.
ULTRABAKE
TM
BAKING/ROASTING
Your oven is designed with the UItraBake
TM
temperature management system to constantly
monitor oven temperature. The burner element will
cycle, as needed, to maintain the desired
temperature. This feature is automatically activated
when the oven is in operation.
IMPORTANT: Do not try to light the oven burner
during a power failure.
Front
Rear
1.
Place the SturdiGlide
TM
racks where you need
them in the oven. For more information, see
"Positioning racks and pans" in the "Using the
Oven" section, p. 9.
2.
Choose the bake setting.
PRESS YOU SEE
3,
Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°E Press • to raise the
temperature or • to lower the temperature in
5°F amounts. Use these pads until the desired
temperature shows on the small display.
PRESS
TEMP
YOU SEE
14
(example for bake at 375°F)