Removable Parts - Kenmore 95649 Use, Care, Safety Manual

REMOVABLE KNOBS
MOLDED
RIB
REPLACING THE OVEN LIGHT
GLASS
_IER
SPRING
CLIP
All control knobs may be removed for easy cleaning by
pulling the knob straight off the stem. Be sure that the
knob Is in the OFF position before removal.
Hint: Slip a thin cloth (such as a handkerchief) or a piece
of string under and around the knob edge and pull
straight off.
Caution: Read these instructions carefully before re-
placing theknobs. Replacing the knobs improperly will
damagetheknobsandthespring clipsonthestems. If
this happens, the knobs will fit loosely.
To replace the knob:
1. The knob stem has a groove in each side. The
groove on one side has a spring clip. The other
groove Is clear (see Illustration).
2. Check the Inside of theknob and find the molded rib.
3. Replace the knob by fitting the molded rib inside the
knob Into the clear groove on the stem.
Note: Be sure to replace knobs on the correct
stems.
GLASS
COVER
Be sure that the light switchis in the off position.
DO not touch hot oven bulb. Do not touch oven
bulb with wet hands. Do not wipe oven light area
with wet cloth.
Never touch the electrically live collar on the
bulb when replacing it.
Electrical power must be shut off if you have to
replace a broken bulb.
1. Unscrew glass cover and remove.
2. Replace the bulb with a 40 watt appliance bulb.
3. Replace the cover.
Note: We recommend you usea 40watt appliance bulb
that Is no longer than 3 1/2".
17 NEMNT96