Topcasting; Temperature Gauge; Bezeltemperature Gauge; Handle - Kenmore 415.16220 Assembly Instructions/Use And Care Manual

Top Casting, Temperature Gauge,BezelTemperature Gauge,Logo Hate and Handle
Raise sideburner lid to instafl shoulder bolt (50) into top casting.
Insert temperature gauge into hole on bezeland grifl lid. Gently press temperature gauge down to engage.
Note: Do not put bezel on temperature gauge and then place on grifl rid. This may damage the locking device on the
temperaturegauge.
insert logo plate into grifl rid.
Attach handle with wing nuts (55).
4 ......... Temperatu re Gauge
TopCasting...... "b/'" 55
"'" ............. Bezel T emperature Qty.2
Gauge
50
Qty.2
Backsideof Temperature
Gaugeshowinglockingdevice.
LP Tank
LPtank is sold separately. Use only with an OPB (over-
fill protection device} equipped LP tank. Fill and leak
check before attaching to grill and regulator.
[ PlaceLP tank into hole in bottom shelf with tank collar
opening facing front panel as shown. Finger tighten
tank thumbscrew to hold LP tank securely in place.
See Use and Caresection to correctly Leak Test and
perform the Burner Flame Check.
Back of cart
Tank coflar opening must face to front panel once
tank is attached.
Failure to install tank correctly may allow gas hose to
be damaged in operation, resulting in the risk of fire.
4{_3366506,25